Digi-CordComputer Cords and Cables

What Negative Loss value found in test result means when I’m using FLUKE fiber tester on SM and MM fiberoptic?

Some times I’m using the fluke fiber optic tester for multimode and singlemode fiber optic cables and some times they pass just fine but some times the “Negative Loss value found in test result” appear and still seems like it pass but I don’t understand WHY if it pass WHAT this “negative” thing show up in my test result and I still don’t know how to avoid it.

I will appreciate any help.
Thank you
Philippe

If this is anything like the results I’ve seen before, it means that their is filtration of light into the fibre path. Can be caused by breached insulation.

Single Mode 144 Strand Fiber Optic Cable – Discount-Low-Voltage.com

Greenlee 5890-FC Multimode and Single mode Fiber Optic Test Set with FC Interface $1,861.61 - Insertion loss test set for multimode and singlemode fiber850/1300nm loss measurements1310/1550nm loss measurementsConnector for FC, SC, or STRugged package designEasy-to-use Portable packageEconomically priced…

Allen Tel GBST2-D1-03 Fiber Optic Cable Assembly Patch Cord, ST To ST, Duplex Cable, Singlemode Fiber, 3-Meter Length, Yellow Jacket $24.99 All cables are 100% tested for insertion loss and back reflection for worry free installation. Allen Tel’s cable assemblies come in SC, ST, LC, FC and MTRJ configurations and are available in both Simplex and Duplex versions. Features: Insertion Loss …

Allen Tel GBLCC-S1-03 Fiber Optic Cable Assembly Patch Cord, LC To SC, Simplex Cable, Singlemode Fiber, 3-Meter Length, Yellow Jacket $15.89 …

CORNING® LANScape Tool Kit – TKT-UNICAM-PFC $1,300.00 TKT-UNICAM-PFC UniCam Pretium Tool Kit; includes UniCam Pretium Installation Tool for termination of multimode and single-mode SC, LC and ST® Compatible Connectors; includes Pretium Flat Cleaver, 1.25 and 2.50 mm VFL ferrule adapters, and all required fiber preparation and cleaning tools and materials…

Cablestogo Fiber Optic Simplex Patch Cable 30m Smf Sc St 9 125 Pvc Yellow Superb Quality $89.31 Green Compliance: Yes. Green Compliance Certificate/Authority: RoHS….

IEC 61280-1-1 Ed. 1.0 b:1998, Fibre optic communication subsystem basic test procedures – Part 1-1: Test procedures for general communication … for single-mode optical fibre cable $46.00 Applies to fibre optic general communication subsystems. Enables the measure of the optical power coupled from the output of a transmitter under test into single-mode optical fibre cable containing dispersion-unshifted fibre or dispersion-shifted fibre….

IEC 60874-10-2 Ed. 1.0 en:1997, Connectors for optical fibres and cables – Part 10-2: Detail specification for fibre optic connector type BFOC/2,5 terminated to single-mode fibre type B1 $68.00 …

IEC 60874-14-3 Ed. 1.0 en:1997, Connectors for optical fibres and cables – Part 14-3: Detail specification for fibre optic adaptor (simplex) type SC for single-mode fibre $85.00 …

Accell B087B-005B UltraAV DisplayPort to DVI-D Single-Link Active Adapter ATI Certified (Black) $34.99 Connects a DisplayPort enabled puter to a DVI-D monitor TV or projectorActive adapter protocol converter converts a DisplayPort signal to single-link DVISupports TV resolutions of up to 1080p and up to 1920×1200 (reduced blanking) for putersATI Eyefinity Validated by AMD10″…

Accell B087B-006B UltraAV Mini DisplayPort to DVI-D Single-Link Active Adapter ATI Certified (Black) $34.99 Connects a DisplayPort enabled puter to a DVI-D monitor TV or projectorActive adapter protocol converter converts a DisplayPort signal to single-link DVISupports TV resolutions of up to 1080p and up to 1920×1200 (reduced blanking) for putersATI Eyefinity Validated by AMD10″…

Singlemode Duplex Patch Cable $44.94 Tripp Lite’s singlemode duplex fiber optic LC/LC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end, LC connectors on the other. Duplex singlemode fiber is most commonly used in LAN applications. Main FeaturesManufacturer: Tripp LiteManufacturer Part Number: N370-05MManufacturer Website Address: www.tripplite.comProduct Type: Patch Cable Single-mode ExternalCable Length: 16.4ftNumber of Connectors: 4Connector Details: 2 x LC, 2 x LCStandard Warranty: Lifetime

Tripplite / Tripp Lite Singlemode Duplex Patch Cable / N370-05M $48.34 Tripplite – Tripp Lite Singlemode Duplex Patch Cable – N370-05M

Singlemode Duplex Fiber Patch Cable SC – LC $34.99 Belkin Singlemode Duplex Fiber Patch Cables are 100% tested for quality and reliability and feature Corning glass and superior construction.

30M/100ft. Singlemode Duplex Patch Cable Fiber Optic $100.99 Tripp Lite’s 30-meter/100ft. singlemode duplex fiber optic patch cable is manufactured from 8.3/125 zipcord fiber. It has LC connectors on one end ST connectors on the other

6ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable ST/ST 2 meter $24.99 2-meter Duplex Singlemode Fiber Patch Cable ST/ST

Tripp Lite Singlemode Duplex Patch Cable $30.99 16.40 ft 2 x SC 2 x ST 9/125 µm Any fiber optic hardware or NIC card requiring singlemode duplex cable with SC/ST connectors. FDDI ONFR Singlemode Duplex Patch Cable5-meter Duplex Single mode Fiber Patch Cable, SC/ST Zipcord Insertion loss testing performed on every connector (0.2db typical) and provided with cable Beveled edge on ends of glass makes insertion of plug a breeze Fiber made from glass (not a polymer) Color coded shrouds identify transmit and receive Tripp Lite’s 5-meter, single mode duplex fiber optic SC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has ST connectors on one end, SC on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex single mode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Fiber Optic Lifetime N354-05M Network Cable PVC Patch Cable SC ST Singlemode Duplex Patch Cable Tripp Lite www.tripplite.com

2m LC/SC Duplex 9/125 Singlemode Fiber Patch Cable – Yellow $26.99 For your high speed singlemode fiber applications Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go.

Tripplite N455000S Duplex Singlemode Fiber Couple $30.93 This coupler provides a simple and easy way to link together two Singlemode fiber optic cables with LC connectors. Can be used with duplex or simplex cable assemblies. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Dual LC female connectors For 8.3/125 or 9/125 Singlemode fiber System Requirements Two Singlemode Fiber Optic cables with LC type connectors Package Includes Duplex LC to LC Singlemode fiber optic coupler

1 Meter Fiber Optic Cable Singlemode ST/SC Duplex 8.3/125 $48.99 Belkin Singlemode Duplex Fiber Patch Cables are 100% tested for quality and reliability and feature Corning glass and superior construction.

15M Duplex Singlemode 8.3/125 Patch Cable LC/ST 50ft $53.99 Tripp Lite’s 15-meter ( 50ft ) singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end ST connecto

20M Duplex Singlemode 8.3/125 Patch Cable LC/ST 66ft $89.99 Tripp Lite’s 20-meter ( 66ft ) singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end ST connecto

TRIPP LITE DUPLEX SINGLEMODE 8.3/125 FIBER N36605M $42.76 Tripp Lite s 5meter singlemode duplex fiber optic LC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on one end LC connectors on the other a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.nbsp;DUPLEX SINGLEMODE 8.3/125 FIBER OPTIC PATCH CABLE LC/SC 5M

3M/10ft. LC/LC Singlemode Duplex Fiber Optic Patch Cable $39.99 Tripp Lite’s 3-meter/10ft. singlemode duplex fiber optic LC/LC patch cable is manufactured from 8.3/125 zipcord fiber. It has a PVC jacket and is FDDI and OFNR rated.

6M/20ft. SC/SC Duplex Singlemode Fiber Optic Patch Cable $59.99 Tripp Lite’s 6-meter/20ft. singlemode duplex fiber optic SC/SC patch cable is manufactured from 8.3/125 zipcord fiber. It has SC connectors on each end a PVC jacket and is

5M/15ft. SC/SC Duplex Singlemode Fiber Optic Patch Cable $51.99 Tripp Lite’s 5-meter/15ft. singlemode duplex fiber optic SC/SC patch cable is manufactured from 8.3/125 zipcord fiber. It has SC connectors on each end a PVC jacket and is

N354-05M – Tripp Lite Singlemode Duplex Patch Cable – Sc – St – 16.4Ft $30.88 tripp Lite’s 5-meter, Singlemode Duplex Fiber Optic Sc/st Patch Cable Is Manufactured From 8.3/125 Zipcord Fiber. The Cable Has St Connectors On One End, Sc On The Other. Duplex Singlemode Fiber Is Most Commonly Used In Lan Applications. [1082471] UPC: 037332122414 UNSPC: 26121607 6L x 5.4W x 0.5H 0.2 LB 0.03 Cubes

N366-01M – Tripp Lite Singlemode Duplex Patch Cable – Lc – Sc – 3.28Ft $29.38 tripp Lite’s Singlemode Duplex Fiber Optic Lc/sc Patch Cable Is Manufactured From 8.3/125 Zipcord Fiber. The Cable Has Sc Connectors On One End, Lc Connectors On The Other. Duplex Singlemode Fiber Is Most Commonly Used In Lan Applications. [1058422] UPC: 037332100535 UNSPC: 26121607 9.5L x 7W x 0.5H 0.15 LB 0 Cubes

N366-02M – Tripp Lite Singlemode Duplex Patch Cable – Lc – Sc – 6.56Ft $29.38 tripp Lite’s Singlemode Duplex Fiber Optic Lc/sc Patch Cable Is Manufactured From 8.3/125 Zipcord Fiber. The Cable Has Sc Connectors On One End, Lc Connectors On The Other. Duplex Singlemode Fiber Is Most Commonly Used In Lan Applications. [1032258] UPC: 037332120380 UNSPC: 26121607 7L x 7W x 0.5H 0.06 LB 0.01 Cubes

N366-05M – Tripp Lite Singlemode Duplex Patch Cable – Lc – Sc – 16.4Ft $32.21 tripp Lite’s 5-meter, Singlemode Duplex Fiber Optic Lc/sc Patch Cable Is Manufactured From 8.3/125 Zipcord Fiber. The Cable Has Sc Connectors On One End, Lc Connectors On The Other, A Pvc Jacket, And Is Fddi And Ofnr Rated. Duplex Singlemode Fiber Is Most Commonly Used In Lan Applications. Tripp Lite Warrants This Product To Be Free From Defects In Materials And Workmanship For Life. [368439] UPC: 037332099570 UNSPC: 26121607 6.3L x 5.6W x 0.5H 0.1 LB 0 Cubes

N370-05M – Tripp Lite Singlemode Duplex Patch Cable – Lc – Lc – 16.4Ft $43.27 tripp Lite’s Singlemode Duplex Fiber Optic Lc/lc Patch Cable Is Manufactured From 8.3/125 Zipcord Fiber. The Cable Has Lc Connectors On One End, Lc Connectors On The Other. Duplex Singlemode Fiber Is Most Commonly Used In Lan Applications. [1032265] UPC: 037332099518 UNSPC: 26121607 5L x 5W x 5H 0.24 LB 0.01 Cubes

6ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable LC/LC 2 meter $38.99 6ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable LC/LC 2 meter

6ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable SC/SC 2 meter $29.99 6ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable SC/SC 2 meter

10ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable SC/SC 3 meter $29.99 10ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable SC/SC 3 meter

3ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable LC/SC 1 meter $26.99 3ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable LC/SC 1 meter

16ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable LC/SC 5 meter $29.99 16ft Duplex Singlemode 8.3/125 Fiber Optic Patch Cable LC/SC 5 meter

Cables To Go 2m ST/SC Duplex 9/125 Singlemode Fiber Patch Cable 15289 $31.38 Cables To Go 2m ST/SC Duplex 9/125 Singlemode Fiber Patch Cable 15289

Tripp Lite Fiber Optic Patch Cable 6.56ft 2 x LC 2 x ST Patch Cable Singlemode N36802M $55.32 Tripp Lite s singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. Duplex singlemode fiber is most commonly used in LAN applications.

Tripp Lite 3M Duplex Singlemode 8.3/125. Each $59.84 Manufacturer: Tripp Lite. Each. Tripp Lite’s 3-meter, singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end, ST connectors on the other, a PVC jacket, and is FDDI and OFNR rated.

Cables To Go Fiber Optic Duplex Singlemode Patch Cable $31.99 1.12 oz 2 x LC 2 x SC 33346 79″ 9/125 µm Color-coded connector Perfect for use in Gigabit Ethernet applications OFNR-Rated Blue Cables To Go Fiber Optic Fiber Optic Duplex Singlemode Patch Cable LC Lifetime Network Cable PVC Patch Cable SC Single-mode www.cablestogo.com

TRIPP LITE DUPLEX SINGLEMODE 8.3/125 FIBER OPTIC N35603M $44.92 Tripp Lite s 3meter singlemode duplex fiber optic SC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on each end a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.nbsp;DUPLEX SINGLEMODE 8.3/125 FIBER OPTIC PATCH CABLE SC/SC 3M

Tripplite N36805MP 5M Duplex Singlemode 8.3/125 F $91.65 Tripp Lite s 5meter ( 15ft ) Plenum Rated singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end ST connectors on the other and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. Plenum cable is used in plenum return air chambers where local fir codes dictate the use of plenum rated cable. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Manufactured from 8.3/125 duplex (zipcord) fiber PLENUM Rated jacket Length: 5meter ( 15ft ) Connectors: 2 LC and 2 ST connectors on each end Insertion loss testing performed on every connector (0.2db typical) and provided with cable Beveled edge on ends of glass makes insertion of plug a breeze Fiber made from glass (not a polymer) Color coded shrouds identify transmit and receive Fiber optic distributed data interface (FDDI) rated OFNR (riser rated) Tripp Lite warrants this product to be free from defects in materials and workmanship for life Applications Networking equipment that requires singlemode fiber optic patch cables as well as Plenum Rated cable System Requirements Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SCconnectors Package Includes 5meter ( 15ft ) Duplex Plenum Rated Singlemode Fiber Patch Cable LC/ST

Tripp Lite Singlemode Duplex Patch Cable 16.4ft 2 x LC 2 x LC Patch Cable Singlemode N37005M $55.32 Manufactured from 8.3/125 duplex (zipcord) fiber. PVC jacket. Length: 5meter. Connectors: 2 LC and 2 LC connectors on each end. Insertion loss testing performed on every connector (0.2db typical) and provided with cable. Beveled edge on ends of glass makes insertion of plug a breeze. Fiber made from glass (not a polymer). Color coded shrouds identify transmit and receive. Fiber optic distributed data interface (FDDI) rated. OFNR (riser rated). Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/LCconnectors. Color: Yellow. Clad Diameter: 125 micron. Core Diameter: 8.3 micron. Fiber Type: Singlemode. Number of Fibers: 2. Intended Application: Computer Networking (Fiber).

Tripp Lite Singlemode Duplex Patch Cable 6.56ft 2 x LC 2 x SC Patch Cable Singlemode N36602M $41.8 Manufactured from 8.3/125 duplex (zipcord) fiber. PVC jacket. Connectors: 2 SC and 2 LC connectors on each end. Insertion loss testing performed on every connector (0.2db typical) and provided with cable. Beveled edge on ends of glass makes insertion of plug a breeze. Fiber made from glass (not a polymer). Color coded shrouds identify transmit and receive. Fiber optic distributed data interface (FDDI) rated. OFNR (riser rated). Clad Diameter: 125 micron. Core Diameter: 8.3 micron. Fiber Type: Singlemode. Number of Fibers: 2. Intended Application: Computer Networking (Fiber). Cable Length (m): 2. Color: Yellow.

TRIPP LITE 5m Duplex Singlemode 8.3/125 Fiber Patch N35605M $43.86 Tripp Lite 5meter ( 15 ) singlemode duplex fiber optic SC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on each end a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Cable Type: Fiber Optic. Cable Characteristic: Patch Cable. Core/Cladding Diameter: 9/125 m. Cable Length: 16.40 . Connector on First End: 2 x SC Male. Connector on Second End: 2 x SC Male. Jacket: PVC. Color: Yellow. Package Contents:. Fiber Optic Duplex Patch Cable. 5meter ( 15 ) Duplex Singlemode Fiber Patch Cable SC/SC. Additional Information:. Beveled edge on ends of glass makes insertion of plug a breeze. Fiber made from glass (not a polymer). Color coded shrouds identify transmit and receive. Insertion loss testing performed on every connector (0.2db typical) and provided with cable. Duplex singlemode fiber is most commonly used in LAN applications. Certifications and Standards: FDDI.

Startech Fiber Optic Duplex Cable 9.84ft 2 x SC 2 x ST Duplex Cable Singlemode Yellow $50.43 Your company s backbone is its Network. Without a stable reliable network your company can t communicate. A lack of communication means a loss of revenue. What do you do now? Enter the duplex Singlemode Fiber Optic patch cable assembly. This product provides the necessary link between Fiber networking devices for highspeed longdistance networks. Each cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100 reliability. The same lifetime warranty that applies to all cables protects our customers from any problems they might encounter with our cables. Network Cable Type: Network cable. Technology: Fiber optic. Type of Fiber Optics: Singlemode. Core / Cladding Diameter: 8.3 / 125 micron. Length: 10 .

Tripp Lite Duplex Fiber Optic Patch Cable 6.56ft 2 x LC 2 x LC Patch Cable Singlemode N37002M $52.2 Tripp Lite s 2meter singlemode duplex fiber optic LC/LC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end LC connectors on the other a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life.

Sf Pro Singlemode Source $1441.99 SF PRO SINGLEMODE SOURCE

BELKIN COMPONENTS R6F011 SC/SC Singlemode Duplex Fiber Optic Coupler $28.63 This is a singlemode duplex fiber optic cable coupler.Primary InformationNetwork Cable Typenbsp;:nbsp;nbsp;Network couplernbsp;Cable Technologynbsp;:nbsp;nbsp;Fiber opticnbsp;Left Connector Gendernbsp;:nbsp;nbsp;Femalenbsp;Right Connector Gendernbsp;:nbsp;nbsp;Femalenbsp;Left Connector Typenbsp;:nbsp;nbsp;SCSinglemodenbsp;Right Connector Typenbsp;:nbsp;nbsp;SCSinglemodenbsp;UNSPSC CodeUNSPSC Codenbsp;:nbsp;nbsp;26121607nbsp;

3M Duplex Singlemode 8.3/125 Patch Cable LC/ST 10ft $69.99 Tripp Lite’s 3-meter single mode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end ST connectors on the

Tripp Lite Fiber Optic Duplex Patch Cable 3.28ft 2 x LC 2 x ST Fiber Optic Duplex Cable Singlemode Yellow N36801M $51.29 Tripp Lite s 1meter ( 3ft ) singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end ST connectors on the other a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Type: Network Cable. Color: Yellow. Jacket PVC Riser rated. Cable Length: 39.37 . Duplex singlemode fiber is most commonly used in LAN applications. Insertion loss testing performed on every connector (0.2db typical) and provided with cable. Beveled edge on ends of glass makes insertion of plug a breeze. Fiber made from glass (not a polymer). Color coded shrouds identify transmit and receive.

Tripp Lite Fiber Optic Duplex Patch Cable 3.28ft 2 x LC 2 x LC Fiber Optic Duplex Cable Singlemode Yellow N37001M $51.16 Tripp Lite s 1meter ( 3ft ) singlemode duplex fiber optic LC/LC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end LC connectors on the other a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Type: Network Cable. Color: Yellow. Jacket PVC Riser rated. Length 39.37 . Duplex singlemode fiber is most commonly used in LAN applications. Insertion loss testing performed on every connector (0.2db typical) and provided with cable. Beveled edge on ends of glass makes insertion of plug a breeze. Fiber made from glass (not a polymer). Color coded shrouds identify transmit and receive.

LC/ST Simplex 9/125 Single Mode Fiber Patch Cable – patch cable – 10 ft $17.99 3M LC/ST SIMPLEX 9/125 SINGLEMODE FIBER PATCH CABLE

CABLES TO GO 14418 4m LC SC DUPLEX 9/125 SINGLEMODE USA $60.62 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements.Primary InformationNetwork Cable Typenbsp;:nbsp;nbsp;Network Cablenbsp;Left Connector Gendernbsp;:nbsp;nbsp;Malenbsp;Right Connector Gendernbsp;:nbsp;nbsp;Malenbsp;Left Connector Typenbsp;:nbsp;nbsp;SCnbsp;Right Connector Typenbsp;:nbsp;nbsp;LCnbsp;DimensionsMiscellaneousLengthnbsp;:nbsp;nbsp;13.123 feetnbsp;Enclosure Colornbsp;:nbsp;nbsp;Yellownbsp;ServiceSupportService Support Typenbsp;:nbsp;nbsp;Lifetime Warrantynbsp;UNSPSC CodeUNSPSC Codenbsp;:nbsp;nbsp;26121607nbsp;

10M LC LCSIMPLEX SINGLEMODE FIBER $19.94 10M LC LCSIMPLEX SINGLEMODE FIBER 10M LC LCSIMPLEX SINGLEMODE FIBER

Cables To Go 34855 15m SCSC PLENUMRATED SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $46.97 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Ideal for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Ideal for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34502 6m LCSC PLENUMRATED DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $50.12 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34523 20m SCST PLENUMRATED DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $116.34 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) SC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34529 5m STST PLENUMRATED DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $63.46 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34854 10m SCSC PLENUMRATED SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $42.2 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Ideal for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Ideal for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34807 30m LCLC PLENUMRATED SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $78.08 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Ideal for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Ideal for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37928 5m LCST PLENUMRATED SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $43.3 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: ST to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37926 2m LCST PLENUMRATED SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $40.68 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: ST to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34556 15m LCLC PLENUMRATED DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $91.61 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37917 3m LCLC PLENUMRATED DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $62.97 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 34558 30m LCLC PLENUMRATED DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $125.76 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34557 20m LCLC PLENUMRATED DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $103.58 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

LC/UPC Singlemode Duplex Fiber Optic Cable Adapter Coupler $2.7 Specificationscomes with Zirconia SleeveDimensions: 1.38 in x 0.59 in x 0.51 inWeight: 0.14 oz

Of-500-S – Fluke Networks Optifiber Of-500-S Singlemode Cable Analyzer $9896.6 as Bandwidth Increases Beyond 10 Gb/s to 40 And 100 Gb/s, The Use of Fiber Optics in Enterprise Networks Continues to Grow- And so do The Requirements For Testing And Certification. To Ensure The Performance of Mission-critical Fiber Infrastructure, Network Owners Need a Better Picture of Their Fiber Plant. And no Fiber Test Tool Provides a More Complete Picture Than Optifiber. optifiber Integrates Power/loss, Fiber Length Measurement, Otdr Analysis And Fiber Connector End-face Imaging. The Result is a Higher Tier of Fiber Certification And Diagnostics. The Companion Linkware Software Manages All Test Data And Produces Professional-quality Reports. [BC2114] UPC: 754082069041 UNSPC: 41113711 21L x 16W x 8H 10 LB 1 Cubes

Cables To Go 08353 2m STST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $38.91 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 08353 2M StSt Duplex 9125 SingleMode Fiber Patch Cable Yellow $38.91 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements.Custom lengths are available just click here for a custom fiber quote.Features:A cost effective solution that provides higher bandwidth and support for longer distancesPerfect for use in Gigabit Ethernet applicationsHeadroom for tomorrows higher bandwidth needsLifetime warranty against defects of materials and workmanshipConnectors: 2 ST to 2 STBuffer material: PVCBuffer OD: 900 . mJacket material: PVC OFNRrated Jacket OD: 3.0 mmJacket color: YellowAttenuation 1310 nm: 1.0 dB/kmAttenuation 1550 nm: 0.75 dB/kmMaximum tensile load: 100 N/cmLoaded min. bend radius: 5 cmUnloaded min. bend radius: 3 cmCrush resistance: 750 N/cmImpact resistance: 1000 cyclesFlex resistance: 5000 cyclesCustom lengths are available just give us a call at 8005069607

Cables To Go 37484 15m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $82.33 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 37473 30m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $105.3 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37129 2m SCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $28.44 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 16816 5m SCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $44.15 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 14422 8m USA LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $71.18 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 14447 3m USA SCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $61.11 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 14430 1m USA STST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $55.61 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 14411 20m USA LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $112.11 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 14417 3m USA LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $58.27 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 14418 4m USA LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $60.62 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 14455 15m USA SCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $101.75 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 08356 8m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $44.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 34718 7m LCST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $39.48 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 12505 3m SCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $41.31 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 08355 8m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $61.22 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 34708 4m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $28.78 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 20808 1m SCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $40.29 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 34715 30m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $44.01 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34717 6m LCST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $38.68 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 20455 2m SCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $40.65 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37491 15m SCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $66.36 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37492 20m SCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $74.87 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 29920 3m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $40.16 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37462 7m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $59.22 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37464 15m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $73.31 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37465 20m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $81.24 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37467 4m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $41.3 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37469 7m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $44.1 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 29191 1m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $51.16 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37471 15m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $54.28 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37472 20m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $60.1 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 28950 5m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $42.32 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 29190 1m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $37.65 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 26260 2m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $38.91 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37474 1m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $50.31 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 37488 6m SCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $47.52 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37477 4m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $56.51 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 37478 5m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $59.51 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 26566 5m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $55.37 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37482 9m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $67.04 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 37461 6m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $57.33 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 18575 10m SCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $57.77 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 34709 6m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $29.81 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34711 8m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $30.63 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 18310 1m STSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $37.65 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 13478 3m STSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $40.16 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 13701 3m STST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $40.16 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 25933 5m STST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $42.32 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 13479 10m STSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $46.27 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 24762 5m STSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $42.32 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37475 2m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $51.09 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 31796 8m STSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $44.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37479 6m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $61.11 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 15289 2m STSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $38.91 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37118 1m STST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $26.94 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: ST to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37120 3m STST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $28.2 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: ST to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 26264 2m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $52.36 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 28523 10m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $46.27 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37476 3m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $51.75 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 37483 10m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $69.53 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 37487 4m SCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $42.84 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37485 20m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $88.82 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 21763 8m SCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $54.21 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37468 6m LCSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $43.34 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37109 2m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $27.59 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37128 1m SCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $28.26 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37104 2m LCLC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $34.31 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37110 3m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $28.2 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37130 3m SCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $28.78 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37103 1m LCLC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $33.7 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37115 3m LCST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $35.04 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37107 10m LCLC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $39.81 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 08355 8M LcLc Duplex 9125 SingleMode Fiber Patch Cable Yellow $61.22 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements.Custom lengths are available just click here for a custom fiber quote.Features:A cost effective solution that provides higher bandwidth and support for longer distancesPerfect for use in Gigabit Ethernet applicationsHeadroom for tomorrows higher bandwidth needsLifetime warranty against defects of materials and workmanshipConnectors: 2 LC to 2 LCBuffer material: PVCBuffer OD: 900 . mJacket material: PVC OFNRrated Jacket OD: 3.0 mmJacket color: YellowAttenuation 1310 nm: 1.0 dB/kmAttenuation 1550 nm: 0.75 dB/kmMaximum tensile load: 100 N/cmLoaded min. bend radius: 5 cmUnloaded min. bend radius: 3 cmCrush resistance: 750 N/cmImpact resistance: 1000 cyclesFlex resistance: 5000 cyclesCustom lengths are available just give us a call at 8005069607

Cables To Go 37481 8m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $64.53 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go 37108 1m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $26.94 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37111 5m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $29.29 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 08356 8M LcSc Duplex 9125 SingleMode Fiber Patch Cable Yellow $44.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements.Custom lengths are available just click here for a custom fiber quote.Features:A cost effective solution that provides higher bandwidth and support for longer distancesPerfect for use in Gigabit Ethernet applicationsHeadroom for tomorrows higher bandwidth needsLifetime warranty against defects of materials and workmanshipConnectors: 2 LC to 2 SCBuffer material: PVCBuffer OD: 900 . mJacket material: PVC OFNRrated Jacket OD: 3.0 mmJacket color: YellowAttenuation 1310 nm: 1.0 dB/kmAttenuation 1550 nm: 0.75 dB/kmMaximum tensile load: 100 N/cmLoaded min. bend radius: 5 cmUnloaded min. bend radius: 3 cmCrush resistance: 750 N/cmImpact resistance: 1000 cyclesFlex resistance: 5000 cyclesCustom lengths are available just give us a call at 8005069607

Cables To Go 37112 10m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $31.25 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 33437 3m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE RED $28.2 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37460 4m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $58.71 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 28758 3m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $55.74 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 29951 1m STST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $37.65 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available just give us a call at 8005069607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 34713 15m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $35.26 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37131 5m SCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $30.21 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37459 20m STST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $60.1 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34721 15m LCST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $46.75 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37113 1m LCST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $33.28 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34649 15m SCST LSZH DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $92.91 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37677 3m STSC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE RED $39.61 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: ST to SC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34600 1m LCLC LSZH DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $70.66 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34621 9m LCSC LSZH DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $78.36 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34627 2m LCST LSZH DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $65.95 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34629 4m LCST LSZH DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $71.24 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34636 15m LCST LSZH DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $102.9 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34966 2m SCSC LSZH SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $34.61 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: LowSmoke ZeroHalogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34967 3m SCSC LSZH SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $35.53 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: LowSmoke ZeroHalogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34924 20m LCSC LSZH SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $57.34 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: LowSmoke ZeroHalogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37704 10m LCSC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE BLACK $46.83 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: SC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Black. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34900 1m LCLC LSZH SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $42.42 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: LowSmoke ZeroHalogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34919 7m LCSC LSZH SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $42.77 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: LowSmoke ZeroHalogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34975 15m SCSC LSZH SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $46.97 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: LowSmoke ZeroHalogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34915 3m LCSC LSZH SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $38.13 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: LowSmoke ZeroHalogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37729 10m LCLC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE BLUE $51.58 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34616 4m LCSC LSZH DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $62.39 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37755 1m STSC PLENUM 9125 DUPLEX SINGLEMODE FIBER PATCH CABLE RED $51.71 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) SC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37793 5m LCSC PLENUM 9125 DUPLEX SINGLEMODE FIBER PATCH CABLE GREEN $48.84 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37685 1m LCST PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE BLUE $39.38 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: ST to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37716 2m LCSC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE RED $36.44 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: SC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37772 3m LCST PLENUM 9125 DUPLEX SINGLEMODE FIBER PATCH CABLE GREEN $60.63 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37773 5m LCST PLENUM 9125 DUPLEX SINGLEMODE FIBER PATCH CABLE GREEN $73.01 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37774 10m LCST PLENUM 9125 DUPLEX SINGLEMODE FIBER PATCH CABLE GREEN $86.93 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37737 3m LCLC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE RED $44.97 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37816 2m LCLC PLENUM 9125 DUPLEX SINGLEMODE FIBER PATCH CABLE RED $60.26 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34646 8m SCST LSZH DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $82.91 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 34903 4m LCLC LSZH SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $45.64 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: LowSmoke ZeroHalogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34601 2m LCLC LSZH DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $73.62 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37693 5m LCST PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE GREEN $43.3 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: ST to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37912 3m LCSC PLENUMRATED DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $46.14 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 37719 10m LCSC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE RED $46.83 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: SC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37792 3m LCSC PLENUM 9125 DUPLEX SINGLEMODE FIBER PATCH CABLE GREEN $46.14 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37794 10m LCSC PLENUM 9125 DUPLEX SINGLEMODE FIBER PATCH CABLE GREEN $56.78 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37918 5m LCLC PLENUMRATED DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $66.01 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available just give us a call at 8005069607.

Cables To Go 34926 1m LCST LSZH SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $39.38 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: LowSmoke ZeroHalogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34605 6m LCLC LSZH DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE $84.06 Get the performance you demand at a price that makes sense with 9/125 LowSmoke ZeroHalogen (LSZH) Singlemode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

(10 PACK) Keystone Insert with ST Simplex Singlemode Adapter, White $123.33 Compared to the CAT 5/5e cables, fiber optics transmits information at higher bandwidths and over longer distances while maintaining the integrity of a reliable signal. Compared to the multimode fiber connectors, this single mode fiber connector can transmit at higher speeds. This adapter uses a ST jack that fastens the connector in place with a twist-on/twist-off bayonet-style mechanism, which is necessary due to the precise nature of information transfer through the reflected light within the fibers. By using this keystone jack, your setup will minimize the risk of cable damage while keeping it clutter-free and a relief from eye-sores.

(5 PACK) Keystone Insert with ST Simplex Singlemode Adapter, White $63.48 Compared to the CAT 5/5e cables, fiber optics transmits information at higher bandwidths and over longer distances while maintaining the integrity of a reliable signal. Compared to the multimode fiber connectors, this single mode fiber connector can transmit at higher speeds. This adapter uses a ST jack that fastens the connector in place with a twist-on/twist-off bayonet-style mechanism, which is necessary due to the precise nature of information transfer through the reflected light within the fibers. By using this keystone jack, your setup will minimize the risk of cable damage while keeping it clutter-free and a relief from eye-sores.

10M Singlemode Duplex Fiber Optic Cable (9/125) – LC /UPC to SC /APC $31.24 10M Singlemode Duplex Fiber Optic Cable (9/125) – LC /UPC to SC /APC

10M Singlemode Duplex Fiber Optic Cable (9/125) – LC to LC $14.99 10M Singlemode Duplex Fiber Optic Cable (9/125) – LC to LC

10M Singlemode Duplex Fiber Optic Cable (9/125) – ST to ST $14 10M Singlemode Duplex Fiber Optic Cable (9/125) – ST to ST

10M Singlemode Simplex Fiber Optic Cable (9/125) SC/SC APC $24.99 10M Singlemode Simplex Fiber Optic Cable (9/125) SC/SC APC

15M Singlemode Duplex Fiber Optic Cable (9/125) – LC to SC $19.99 15M Singlemode Duplex Fiber Optic Cable (9/125) – LC to SC

1M LC/ ST SINGLEMODE FIBER CBL $41.99 Cables Unlimited – Network cable – LC single mode (M) – ST single mode (M) – 3.3 ft – fiber optic – 9 / 125 micron – yellow

1M SC/SC Singlemode Duplex 9/125 Fiber Patch Cable $10.71 1M SC/SC Singlemode Duplex 9/125 Fiber Patch Cable

1M Singlemode Duplex Fiber Optic Cable (9/125) – LC to LC $17.25 1M Singlemode Duplex Fiber Optic Cable (9/125) – LC to LC

1ft Fiber Optic Adapter Cable LC (Female) to ST (Female) Singlemode 9/125 Duplex $19.95 LC Female – ST Female Duplex (2 Strand) Fiber optic adapter cable. Singlemode (9/125) yellow.

20M Singlemode Duplex Fiber Optic Cable (9/125) – FC to SC $30 20M Singlemode Duplex Fiber Optic Cable (9/125) – FC to SC

25M Singlemode Duplex Fiber Optic Cable (9/125 – FC to LC $34.99 25M Singlemode Duplex Fiber Optic Cable (9/125 – FC to LC

25M Singlemode Duplex Fiber Optic Cable (9/125 – LC to ST $34.99 25M Singlemode Duplex Fiber Optic Cable (9/125 – LC to ST

2M DUPLEX SINGLEMODE 8.3/125 $82.79 Tripp Lite N378-02M – Patch cable – LC single mode (M) – FC single mode (M) – 6.6 ft – fiber optic – 8.3 / 125 micron – yellow

2M Singlemode Duplex Fiber Optic Cable (9/125) – FC to SC $19.99 2M Singlemode Duplex Fiber Optic Cable (9/125) – FC to SC

2M Singlemode Duplex Fiber Optic Cable (9/125) – LC to LC $18.1 2M Singlemode Duplex Fiber Optic Cable (9/125) – LC to LC

2M Singlemode Duplex Fiber Optic Cable (9/125) – SC /APC to SC /APC $12.99 Connector Type: SC /APC TO SC /APC green (Angled Physical Contact).

3M Singlemode Duplex Fiber Optic Cable (9/125) – LC to SC $15.49 3M Singlemode Duplex Fiber Optic Cable (9/125) – LC to SC

50M Singlemode Duplex Fiber Optic Cable (9/125) – FC to LC $74.99 50M Singlemode Duplex Fiber Optic Cable (9/125) – FC to LC

50M Singlemode Duplex Fiber Optic Cable (9/125) – SC to SC $74.99 50M Singlemode Duplex Fiber Optic Cable (9/125) – SC to SC

5M FC /UPC to FC /UPC Singlemode Simplex 3.0mm LSZH Fiber Optic Patch Cord Corning Cable (9/125) $7.99 Connector Type: FC /UPC to FC /UPCCable Type: LSZH Corning CableCore Cladding Diameter: Singlemode Simplex (9/125) UPC TO UPC Wavelength: 1310 nm Length: 5 Meter (16.4 Feet)

5M FC /UPC to SC /UPC Singlemode Simplex 3.0mm LSZH Fiber Optic Patch Cord Corning Cable (9/125) $7.99 Connector Type: FC /UPC to SC /UPCCable Type: LSZH Corning CableCore Cladding Diameter: Singlemode Simplex (9/125) UPC TO UPC Wavelength: 1310 nm Length: 5 Meter (16.4 Feet)

5M SC /UPC to SC /UPC Singlemode Simplex 3.0mm LSZH Fiber Optic Patch Cord Corning Cable (9/125) $7.99 Connector Type: SC /UPC to SC /UPCCable Type: LSZH Corning CableCore Cladding Diameter: Singlemode Simplex (9/125) UPC TO UPC Wavelength: 1310 nm Length: 5 Meter (16.4 Feet)

5M Singlemode Duplex Fiber Optic Cable (9/125) – LC to LC $20.95 5M Singlemode Duplex Fiber Optic Cable (9/125) – LC to LC

Belkin Duplex Fiber Optic Cable – LC Male – SC Male – 3.28ft $29.86 DETAILS: Belkin Components is the preeminent technology leader in connectivity solutions for the computer and consumer electronics user. Producing the highest-quality cabling products has always been the key to success. Always ahead of the rest, Belkin supports the latest technologies. Belkin, the leader in the cable industry, has the cable you need! Product Description Belkin network cable – 3.3 ft Type: Network cable Technology: Fiber optic Type of Fiber Optics: Singlemode Length: 3.3 ft Connector(s): 2 x LC single mode – male Connector(s) (Other Side): 2 x SC single mode – male Manufacturer Warranty: Limited lifetime warranty ALTERNATE ITEM #: F2F802L7-01M UPC: 0722868419984

Belkin Duplex Optic Fiber Cable – LC Male – LC Male – 16.4ft $84.99 Belkin Singlemode Duplex Fiber Patch Cables are 100% tested for quality and reliability and feature Corning glass and superior construction.

Belkin Duplex Optic Fiber Cable – LC Male – LC Male – 3.28ft $75.99 Belkin Singlemode Duplex Fiber Patch Cables are 100% tested for quality and reliability and feature Corning glass and superior construction.

Belkin Fiber Optic Duplex Patch Cable – LC Male – LC Male – 10ft – Yellow $43.99 DETAILS: Belkin Components is the preeminent technology leader in connectivity solutions for the computer and consumer electronics user. Producing the highest-quality cabling products has always been the key to success. Always ahead of the rest, Belkin supports the latest technologies. Belkin, the leader in the cable industry, has the cable you need! Product Description Belkin network cable – 10 ft Type: Network cable Technology: Fiber optic Type of Fiber Optics: Singlemode Length: 10 ft Core / Cladding Diameter: 8.3 / 125 micron Connector(s): 2 x LC single mode – male Connector(s) (Other Side): 2 x LC single mode – male Manufacturer Warranty: Limited lifetime warranty ALTERNATE ITEM #: F2F802LL-03M UPC: 0722868421055

Belkin Fiber Optic Duplex Patch Cable – SC Male – SC Male – 32.81ft – Yellow $32.79 DETAILS: The demand for more bandwidth puts a continual strain on a Local Area Network. This fiber optic cable offers a superior solution. Boasting an almost limitless bandwidth, this cable technology will support you well into the future. Single Mode SC/SC Duplex Fiber Patch Cable for long distance, high-capacity voice applications like telephone transmission or long distance gigabit networking. 8.3/125 micron, zip cord construction with two SC connectors on both ends.PRODUCT FEATURES:Single-mode duplex fiber cables are suitable for long distance applications;100% tested to assure reliability and excellent performance;Two SC connectors on each end;8.3/125 micron. Product Description Belkin patch cable – 10 ft Type: Patch cable Technology: Fiber optic Type of Fiber Optics: Singlemode Length: 10 ft Core / Cladding Diameter: 8.3 / 125 micron Connector(s): 2 x SC single mode – male Connector(s) (Other Side): 2 x SC single mode – male Color: Yellow Manufacturer Warranty: Limited lifetime warranty ALTERNATE ITEM #: F2F80277-10 UPC: 0722868585436

Belkin Fiber Optic Duplex Patch Cable – ST Male – LC Male – 9.84ft $32.99 Belkin Singlemode Duplex Fiber Patch Cables are 100% tested for quality and reliability and feature Corning glass and superior construction.

Belkin Fiber Optic Duplex Patch Cable – ST Male – ST Male – 6.56ft – Yellow $38.99 DETAILS: The demand for more bandwidth puts a continual strain on a Local Area Network. This fiber optic cable offers a superior solution. Boasting an almost limitless bandwidth, this cable technology will support you well into the future.Single Mode ST/ST Duplex Fiber Patch Cable used in long distance, high-capacity voice applications like telephone transmission or long distance gigabit networking. 8.3/125 micron, zip cord construction with two ST connectors on each end. Product Description Belkin patch cable – 6.6 ft Type: Patch cable Technology: Fiber optic Type of Fiber Optics: Singlemode Length: 6.6 ft Core / Cladding Diameter: 8.3 / 125 micron Connector(s): 2 x ST single mode – male Connector(s) (Other Side): 2 x ST single mode – male Color: Yellow Manufacturer Warranty: Limited lifetime warranty ALTERNATE ITEM #: F2F80200-02M UPC: 0722868585306

Belkin Fibre Optic Duplex Patch Cable – LC Male – ST Male – 33ft – Yellow $249.99 Belkin Singlemode Duplex Fiber Patch Cables are 100% tested for quality and reliability and feature Corning glass and superior construction.

Belkin Fibre Optic Duplex Patch Cable – LC Male – ST Male – 33ft – Yellow $157.95 Belkin Singlemode Duplex Fiber Patch Cables are 100% tested for quality and reliability and feature Corning glass and superior construction.

Cables To Go Duplex Fiber Patch Cable – LC Male – LC Male – 16.4ft – Yellow $94.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed neworks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – LC Male – LC Male – 3.28ft – Yellow $79.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed neworks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – LC Male – LC Male – 6.56ft – Yellow $83.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed neworks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – LC Male – LC Male – 9.84ft – Yellow $86.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed neworks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – LC Male – SC Male – 16.4ft – Yellow $37.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed neworks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – LC Male – SC Male – 3.28ft – Yellow $29.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed neworks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – LC Male – SC Male – 32.81ft – Yellow $44.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed neworks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – SC Male – SC Male – 16.4ft – Yellow $41.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – SC Male – SC Male – 3.28ft – Yellow $36.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – SC Male – SC Male – 9.84ft – Yellow $38.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – SC Male – ST Male – 16.4ft – Yellow $69.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – SC Male – ST Male – 26.25ft – Yellow $34.61 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – SC Male – ST Male – 9.84ft – Yellow $64.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – ST Male – ST Male – 16.4ft – Yellow $32.55 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – ST Male – ST Male – 3.28ft – Yellow $54.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – ST Male – ST Male – 6.56ft – Yellow $58.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Duplex Fiber Patch Cable – ST Male – ST Male – 9.84ft – Yellow $64.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

Cables To Go Fiber Optic Duplex Cable – (Plenum Rated) – LC Male Network – SC Male Network – 16.4ft – Green $37.57 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Duplex Patch Cable – (Plenum) – LC Male – ST Male – 16.4ft – Green $56.16 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Duplex Patch Cable – (Plenum) – LC Male – ST Male – 32.81ft – Green $66.87 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Duplex Patch Cable – (Plenum) – LC Male – ST Male – 9.84ft – Green $46.64 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Duplex Patch Cable – (Riser) – LC Male – SC Male – 16.4ft – Blue $24.9 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – (Riser) – LC Male – SC Male – 3.28ft – Black $20.83 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Color-coded connector keys available in red, blue, green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Black. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – (Riser) – LC Male – SC Male – 3.28ft – Blue $20.83 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – (Riser) – LC Male – SC Male – 9.84ft – Black $30.89 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Black. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – (Riser) – LC Male – SC Male – 9.84ft – Blue $22.11 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – LC Male – 16.4ft – Green $33.56 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – LC Male – 16.4ft – Red $45.5 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – LC Male – 3.28ft – Red $41.28 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Color-coded connector keys available in red, blue, green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – LC Male – 6.56ft – Blue $63.66 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Color-coded connector keys available in red, blue, green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – LC Male – 6.56ft – Green $34.75 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – LC Male – 9.84ft – Black $87.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red, blue, green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Black. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – SC Male – 32.81ft – Blue $47.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Color-coded connector keys available in red, blue, green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – ST Male – 16.4ft – Blue $45.78 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – ST Male – 3.28ft – Black $38.7 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Black. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – ST Male – 6.56ft – Yellow $43.7 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) ST. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Duplex Patch Cable – LC Male – ST Male – 9.84ft – Blue $35.76 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – Plenum-Rated – LC Male – SC Male – 6.56ft – Yellow $35.46 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. They also pro

Cables To Go Fiber Optic Duplex Patch Cable – Plenum-Rated – LC Male – SC Male – 9.84ft – Yellow $35.49 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer OD: 900 ?m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available – just give us a call at 800-506-9607.

Cables To Go Fiber Optic Duplex Patch Cable – SC Male – ST Male – 26.25ft – Yellow $54.7 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) SC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Duplex Patch Cable – SC Male – ST Male – 9.84ft – Yellow $47.01 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) SC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Duplex Patch Cable – ST Male – SC Male – 3.28ft – Red $34.33 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – ST Male – SC Male – 6.56ft – Blue $35.39 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Patch Cable – ST Male – SC Male – 9.84ft – Blue $36.45 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Duplex Singlemode Patch Cable – LC – SC – 6.56ft – Blue $32.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Color-coded connector keys available in red, blue, green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Patch Cable – LC Male – LC Male $87.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Color-coded connector keys available in red, blue, green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.

Cables To Go Fiber Optic Patch Cable – LC Male – LC Male – 3.28ft – Blue $25.92 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Patch Cable – LC Male – LC Male – 6.56ft – Black $17.92 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Black. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Patch Cable – LC Male – LC Male – 9.84ft – Red $34.59 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Patch Cable – LC Male – SC Male – 32.81ft – Green $43.68 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Patch Cable – LC Male – SC Male – 32.81ft – Red $36.02 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: SC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Patch Cable – LC Male – SC Male – 6.56ft – Red $28.03 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: SC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Patch Cable – LC Male – SC Male – 9.84ft – Green $21.69 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Patch Cable – LC Male – SC Male – 9.84ft – Green $35.49 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) SC to (2) LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Patch Cable – LC Male – SC Male – 9.84ft – Red $21.69 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Patch Cable – LC Male – ST Male – 6.6ft $64.91 DETAILS: Cables To Go is an industry leader at delivering the highest quality connectivity products and services to its customers. All cabling solutions from Cables To Go are geared to meet the growing demands placed on today’s systems and company infrastructures. Cables To Go offers high quality products at the most competitive price. Purchase cabling solutions developed by Cables To Go and you’ll experience no compatibility problems with your equipment! Product Description Cables to Go patch cable – 6.6 ft Type: Patch cable Technology: Fiber optic Type of Fiber Optics: Singlemode Length: 6.6 ft Connector(s): 2 x LC single mode – male Connector(s) (Other Side): 2 x ST single mode – male Package Type: Retail ALTERNATE ITEM #: 26262 UPC: 0757120262626

Cables To Go Fiber Optic Patch Cable – ST Male – SC Male – 9.84ft – Red $30.47 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: ST to SC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Simplex Cable – Plenum – LC Male – ST Male – 3.28ft – Blue $30.29 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: ST to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go Fiber Optic Simplex Cable – Plenum – LC Male Network – ST Male Network – 16.4ft – Green $33.31 Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: ST to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Simplex Patch Cable – LC Male – LC Male – 3.28ft – Yellow $25.92 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Simplex Patch Cable – LC Male – LC Male – 32.81ft – Yellow $30.62 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Simplex Patch Cable – LC Male – LC Male – 6.56ft – Green $26.39 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Color-coded connector keys available in red, blue, green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Simplex Patch Cable – LC Male – LC Male – 6.56ft – Yellow $42.99 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Simplex Patch Cable – LC Male – SC Male – 16.4ft – Green $22.53 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with today s high speed networks while providing headroom for tomorrow s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow s higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Green. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Simplex Patch Cable – LC Male – SC Male – 3.28ft – Blue $20.72 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Custom lengths are available – just give us a call at 800-506-9607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Color-coded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go Fiber Optic Simplex Patch Cable – LC Male – SC Male – 32.81ft – Yellow $15.25 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrow’s higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 ?m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation @1310 nm: 1.0 dB/km. Attenuation @1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles