Digi-CordComputer Cords and Cables

PAX EAST 2011 – Females on Female Characters Panel Part One

Madame Butterfly (oil on panel) by Lizzie Riches – Mug – Standard Size $14.50 This mug is created using the finest dye sublimation techniques and creates a stunning dishwasher safe finish. Great as a gift, or for promotional items. Each of our mugs come individually boxed for protection in transit….

Catherine de Medici (oil on panel) by.. – Mug – Standard Size $14.50 This mug is created using the finest dye sublimation techniques and creates a stunning dishwasher safe finish. Great as a gift, or for promotional items. Each of our mugs come individually boxed for protection in transit….

Vanity, central panel from the Triptych of Earthly Vanity and Divine Salvation, c.1485 (oil on panel) by Hans Memling – Mug – Standard Size $14.50 This mug is created using the finest dye sublimation techniques and creates a stunning dishwasher safe finish. Great as a gift, or for promotional items. Each of our mugs come individually boxed for protection in transit….

Goal0 12301 Nomad 7M Solar Panel $59.99 For the minimalist on the go the Nomad 7M delivers an ultra-compact yet powerful solar panel that enables you to charge your handheld devices directly from its USB and 12 Volt DC charging ports….

Leviton 4937 Weatherproof Inlet on Flush Mount Wallplate with Aluminum Cover, Straight Blade Receptacle, Gray $9.99 3-wire outdoor receptacle has waterproof plate and cover. Use with parallel blade grounded connectors….

Reliance Controls PB30 L14-30 30 Amp Generator Power Cord Inlet Box For Up To 7,500 Watt Generators $43.28 The Reliance Controls 30 Amp power inlet box is designed for outdoor use and can be hardwired directly to Reliance Controls transfer switches or panels, eliminating need for cords running through windows or doors. This rain-tight, rust-proof unit includes an NEMA L14-30P inlet plug, six knockout holes, and push-in wire connections. Using one of the four combination 1/2-inch and 3/4-inch knockouts …

Opposites Attract $1.99 …

Opposites Attract [HD] $2.99 …

Abdominal Binder Support Wrap/ Surgical Binder / Hernia Support /Abdominal Hernia Reduction Device $29.99 The Universal Abdominal Binder is made with 6?, 8?, 10″, or 12? wide super stretch elastic. At one end of the elastic there is a 1/8″ thick X 21″ long foam pad laminated (covered) with soft soothing cotton flannel. The foam pad adds rigidity, padding, and provides a non-elastic zone that helps to direct compression to the front of the abdomen. The Universal Abdominal binder is made for many purpos…

Saliva Hormone Test – Female (5 Hormone Test Kit) $165.00 Simple saliva test kit which allows patients to test for any 5 of the following hormones: Estradiol, Progesterone, Testosterone, DHEA, Cortisol, Estrone, Estriol, Androstenedione. Why test saliva? Because steroid hormones play such a vital role in maintenance of health, knowledge of an imbalance in any one or more hormones can help illuminate the cause of health problems and provide a rational bas…

Female Panel Mount Connector $13.58 Female panel mount “N” connector.

Female Panel Blood Test $400 Female Panel Item Catalog Number: LC322535 Are you concerned about menopause? Or are you a younger woman concerned about hormone balance and weight gain? The Life Extension Female Panel is a comprehensive blood test that answers these questions and addresses general

StarTech.com 3.5 Multi Port Panel for Front Drive Bay with eSATA – Type A Female USB, eSATA Female, Female FireWire, Female Audio – Black $27.5 StarTech.com 3.5″ Multi Port Panel for Front Drive Bay with eSATA – Type A Female USB, eSATA Female, Female FireWire, Female Audio – Black

Female Hormone Add-On Panel Blood Test $166.75 Female Hormone Add-On Panel Item Catalog Number: LCADDF This collection of hormone tests was designed as an add-on to the Life Extension® Female Panel. This panel provides information about estrogen status and the mother hormone that acts as a precursor to

Cables To Go / XLR Female Panel-Mount Connector / 40663 $13.81 Cables To Go – XLR Female Panel-Mount Connector – 40663

Cables To Go / 6in RapidRun® HD15 Female Panel-Mount Lead / 42152 $25 Cables To Go – 6in RapidRun® HD15 Female Panel-Mount Lead – 42152

Female Comprehensive Hormone Panel Blood Test $398.66 Female Comprehensive Hormone Panel Item Catalog Number: LC100011 Continual assessment of hormone levels is necessary for women seeking to maintain a healthy hormonal balance. This panel is designed for women looking to monitor progression of hormone supplementation. The Female Comprehensive Hormone

One Port Outlet Female to Female HDMI Wall Plate Panel $12.49 Description:Attractive One Outlet HDMI Wall Plate makes installing your HDMI connection easily.Finished with durable ABS plastic for durable and safer use, it features a female HDMI connector on the front and another female jack on the back.Remove unsightly cable clutter. Simply use the Female HDMI Plate to run cables through the walls, floor or roof.Distinctive and superior designed Female HDMI Panel is perfect for home theater, multimedia classrooms and conference rooms.Dimension: ~11.8(L) x 7.2(W)cmWeight: 72gPackage Included:1 x One Port HDMI Wall Plate

Female Basic Hormone Panel Blood Test $100 Female Basic Hormone Panel Item Catalog Number: LC100013 This panel contains the most essential hormones a woman should have tested. Each one is crucial to supporting optimal health.  Life Extension has written extensively on the numerous disease states associated with low

Female $10 Female

Female Weight Loss Panel Blood Test $398.67 Female Weight Loss Panel Item Catalog Number: LCWLF We understand that losing weight is very difficult for many Americans. Many of us struggle with yo-yo dieting and can never reach our weight loss goals. Obesity is an epidemic leaving many of

Single HDMI Wall Plate Panel Outlet Female to Female $16.49 Description:Attractive One Outlet HDMI Wall Plate makes installing your HDMI connection easily.Finished with durable ABS plastic for durable and safer use.Remove unsightly cable clutter. Simply use the Female HDMI Plate to run cables through the walls, floor or roof.It features a female HDMI connector on the front and another female jack on the back.Distinctive and superior designed Single Outlet Wall Plate is perfect for home theater, multimedia classrooms and conference rooms.Dimension: 8.5 x 8.5 x 1(L*W*D)cmWeight: 49.4gPackage include:1 x Single HDMI Wall Plate

DB15 Female Panel Mountable Field Terminator $8.99 The DGB15FT field termination female connector provides an easy and convenient way to perform field termination of any cable. Separate connection points are provided for all 15 positions of the connector plus the ground. Terminal block design with set screws provides reliable electrical connections utilizing no special tools. The terminal block area is clearly marked making proper termination virtually foolproof. Panel mountable for thickness up to 0.062″.

DB9 Female Panel Mountable Field Terminator $7.99 The DGB9FT field termination female connector provides an easy and convenient way to perform field termination of any cable. Separate connection points are provided for all 9 positions of the connector plus the ground. Terminal block design with set screws provides reliable electrical connections utilizing no special tools. The terminal block area is clearly marked making proper termination virtually foolproof. Panel mountable for thickness up to 0.062″.

DB25 Female Panel Mountable Field Terminator $11.99 The DGB25FT field termination female connector provides an easy and convenient way to perform field termination of any cable. Separate connection points are provided for all 25 positions of the connector plus the ground. Terminal block design with set screws provides reliable electrical connections utilizing no special tools. The terminal block area is clearly marked making proper termination virtually foolproof. Panel mountable for thickness up to 0.062″.

DB9 Female Screwless Panel Mountable Field Terminator $8.99 The DGS9FT field termination female connector provides an easy and convenient way to perform field termination of any cable. Separate connection points are provided for all 9 positions of the connector plus the ground. Screwless terminal block design with spring clamp provides reliable electrical connections utilizing no special tools. Simply depress the spring clamp, insert wire, release and the wire is secure. The terminal block area is clearly marked making proper termination virtually foolproof. Panel mountable for thickness up to 0.062″.

DB15 Female Screwless Panel Mountable Field Terminator $9.99 The DGS15FT field termination female connector provides an easy and convenient way to perform field termination of any cable. Separate connection points are provided for all 15 positions of the connector plus the ground. Screwless terminal block design with spring clamp provides reliable electrical connections utilizing no special tools. Simply depress the spring clamp, insert wire, release and the wire is secure. The terminal block area is clearly marked making proper termination virtually foolproof. Panel mountable for thickness up to 0.062″.

HD15 Female Screwless Panel Mountable Field Terminator $9.99 The DGSH15FT field termination female connector provides an easy and convenient way to perform field termination of any cable. Separate connection points are provided for all 15 positions of the connector plus the ground. Screwless terminal block design with spring clamp provides reliable electrical connections utilizing no special tools. Simply depress the spring clamp, insert wire, release and the wire is secure. The terminal block area is clearly marked making proper termination virtually foolproof. Panel mountable for thickness up to 0.062″.

DB25 Female Screwless Panel Mountable Field Terminator $12.89 The DGS25FT field termination female connector provides an easy and convenient way to perform field termination of any cable. Separate connection points are provided for all 25 positions of the connector plus the ground. Screwless terminal block design with spring clamp provides reliable electrical connections utilizing no special tools. Simply depress the spring clamp, insert wire, release and the wire is secure. The terminal block area is clearly marked making proper termination virtually foolproof. Panel mountable for thickness up to 0.062″.

2 Port HDMI Wall Plate Panel Coupler Female Connector $16.49 Description:Attractive 2 Port HDMI Wall Plate makes installing your HDMI connection easily.Finished with durable ABS plastic for durable and safer use, it features 2 female HDMI connectors on the front and another 2 female jacks on the back.Remove unsightly cable clutter. Simply use the Female HDMI Plate to run cables through the walls, floor or roof.Distinctive and superior designed Female HDMI Panel is perfect for home theater, multimedia classrooms and conference rooms.Dimension: ~11.8(L) x 7.2(W)cmWeight: 83gPackage Included:1 x HDMI Wall Panel

12 Female XLR Connector Panel $12.86 16 gauge cold rolled steel side panels are flanged for added strength. They are punched to accommodate popular configurations of XLR type and 1/4" connectors. All panels are single rack height. Finished in black powder coat.

HDMI Wall Plate Dual Female Port Outlet Panel Cover $20.49 Description:This Dual Outlet HDMI Wall Plate is ideal for home theater installation or presentation environments.It is a convenient way to connect to your HDMI display without the cable mess coming out of the wall.Easy-to-use Dual Female Outlet Plate features an HDMI connector that is female on the front and another female jack on the back thus, allowing you to run your HDMI cable behind your wall.This HDMI Panel Cover Plate also helps you save that cable that is now buried from wear and wear.Material: PlasticDimension: 8.5 x 8.5 x 1cm(L*W*D)Weight: 63.7gPackage Included:1 x HDMI Female Wall Plate

StarTech.com 3 ft HDMI Panel Mount Cable – HDMI Female Digital AuHDMIPNLFM3 $12 StarTech.com 3 ft HDMI Panel Mount Cable – HDMI Female Digital Au

Cables To Go / 6in Panel-Mount USB 2.0 B Female to B Male Cable / 28070 $15.65 Cables To Go – 6in Panel-Mount USB 2.0 B Female to B Male Cable – 28070

Cables To Go / 1ft Panel-Mount USB 2.0 A Female to B Male Cable / 28066 $16.27 Cables To Go – 1ft Panel-Mount USB 2.0 A Female to B Male Cable – 28066

Cables To Go / 3ft Panel-Mount USB 2.0 B Female to B Male Cable / 28074 $17.83 Cables To Go – 3ft Panel-Mount USB 2.0 B Female to B Male Cable – 28074

Cables To Go / 6in Panel-Mount USB 2.0 A Female to B Male Cable / 28065 $15.65 Cables To Go – 6in Panel-Mount USB 2.0 A Female to B Male Cable – 28065

Cables To Go / 2ft Panel-Mount USB 2.0 A Male to A Female Cable / 28063 $17.05 Cables To Go – 2ft Panel-Mount USB 2.0 A Male to A Female Cable – 28063

Cables To Go / 6in Panel-Mount USB 2.0 A Male to A Female Cable / 28060 $15.65 Cables To Go – 6in Panel-Mount USB 2.0 A Male to A Female Cable – 28060

Cables To Go / 1.5ft Panel-Mount USB 2.0 A Female to B Male Cable / 28067 $16.66 Cables To Go – 1.5ft Panel-Mount USB 2.0 A Female to B Male Cable – 28067

Cables To Go / 1.5ft Panel-Mount USB 2.0 B Female to B Male Cable / 28072 $16.66 Cables To Go – 1.5ft Panel-Mount USB 2.0 B Female to B Male Cable – 28072

Cables To Go / 1ft Panel-Mount USB 2.0 A Male to A Female Cable / 28061 $16.27 Cables To Go – 1ft Panel-Mount USB 2.0 A Male to A Female Cable – 28061

Cables To Go / 3ft Panel-Mount USB 2.0 A Female to B Male Cable / 28069 $15.21 Cables To Go – 3ft Panel-Mount USB 2.0 A Female to B Male Cable – 28069

Cables To Go / 6in RapidRun® HD15 (RGBHV) Female Panel-Mount Lead / 42187 $25 Cables To Go – 6in RapidRun® HD15 (RGBHV) Female Panel-Mount Lead – 42187

Cables To Go / 2ft Panel-Mount USB 2.0 B Female to B Male Cable / 28073 $17.05 Cables To Go – 2ft Panel-Mount USB 2.0 B Female to B Male Cable – 28073

Cables To Go / 1.5ft Panel-Mount USB 2.0 A Male to A Female Cable / 28062 $16.66 Cables To Go – 1.5ft Panel-Mount USB 2.0 A Male to A Female Cable – 28062

Cushcraft Laird Technologies S24015P12NF 2.4-2.5GHz High Gain Directional Panel Antenna 15dBi N-Female $139.71 Cushcraft Laird Technologies S24015P12NF 2.4-2.5GHz High Gain Directional Panel Antenna 15dBi N-Female

Female Weight Loss Panel with Vitamin D Blood Test $461.35 Female Weight Loss Panel with Vitamin D Item Catalog Number: LCWLFCOMBO We understand that losing weight is very difficult for many Americans. Many of us struggle with yo-yo dieting and can never reach our weight loss goals. Obesity is an epidemic

Dual Female Port Outlet HDMI Wall Plate Panel Cover $16.49 Description:This Dual Outlet HDMI Wall Plate is ideal for home theater installation or presentation environments.It is a convenient way to connect to your HDMI display without the cable mess coming out of the wall.Easy-to-use HDMI Wall Panel features an HDMI connector that is female on the front and another female jack on the back thus, allowing you to run your HDMI cable behind your wall.This Female HDMI Wall Plate also helps you save that cable that is now buried from wear and tear.Material: PlasticDimension: ~11.8(L) x 7.2(W)cmWeight: 76gPackage Included:1 x Dual Port HDMI Wall Plate

Single Port Outlet HDMI Wall Plate Panel Female Connector $12.49 Description:This Single Outlet HDMI Wall Plate is ideal for home theater installation or presentation environments.It is a convenient way to connect to your HDMI display without the cable mess coming out of the wall.Easy-to-use HDMI Wall Panel features an HDMI connector that is female on the front and another female jack on the back thus, allowing you to run your HDMI cable behind your wall.This Female HDMI Wall Plate also helps you save that cable that is now buried from wear and tear.Material: PlasticDimension: ~11.8(L) x 7.2(W)cmWeight: 60gPackage Included:1 x Single Port HDMI Wall Plate

DB25 Parallel Female to IDC 25 Pin Header Slot Plate – parallel panel $6.99 StarTech.com DB25 Parallel Female to IDC 25 Pin Header Slot Plate – Parallel panel – DB-25 (F) – 25 pin IDC (F)

PyleHome PHDMFF9 HDMI Female to Female Adaptor Right Angle $20.67 Female HDMI to Female HDMI. Repositions Cable Jack for Easy Access Where Space is Limited. Delivers Clean Uncompressed Digital Signals. For Flat Panel HDTVs and Other HookUps Where Space is Limited. Supports High Definition Resolutions 1080p 1080i 720p and Standard Video Format. Gold Plated

RA-2 Female Cigarette Lighter Adapter $8.31 RA-2 Female Cigarette Lighter Adapter Female Cigarette Lighter AdpaterDirectly charge any wireless electronics device with its 12v cigarette lighter adapterIncludes professional marine-grade connector ready to attach to your PowerFilm® Solar Panel

2 Port USB A Female Low Profile Slot Plate Adapter – USB panel $1234.01 StarTech.com 2 Port USB A Female Low Profile Slot Plate Adapter – USB panel – 4 pin USB Type A (F) – 5 pin in-line (F)

2 Port USB 3.0 A Female Low Profile Slot Plate Adapter – USB panel – 1.6 ft $11.99 StarTech.com 2 Port USB 3.0 A Female Low Profile Slot Plate Adapter – USB panel – 9 pin USB Type A (F) – 20 pin IDC (F) – 1.6 ft ( USB 3.0 ) – blue

DB25 Parallel Female to IDC 25 Pin Header Slot Plate – parallel panel – 1.3 ft $3.99 StarTech.com DB25 Parallel Female to IDC 25 Pin Header Slot Plate – Parallel panel – DB-25 (F) – 25 pin IDC (F) – 1.3 ft – gray

2.4GHz 8dBi High Gain Flat-Panel Antenna (N-Female) $18.4 - Increase the signal strength and performance of your signal- 8dBi directional for improving distance and performance- Gold plated and nickel plated contacts- Supplied with N female connection- V.S.W.R: 1.5:1 (Max.)SpecificationsDimensions: 4.09 in x 3.23 in x 4.53 inWeight: 8.4 oz

6 Female 6 Male XLR Connector Panel $12.86 16 gauge cold rolled steel side panels are flanged for added strength. They are punched to accommodate popular configurations of XLR type and 1/4" connectors. All panels are single rack height. Finished in black powder coat.

16 Female 1/4” Jack Connector Panel $12.86 16 gauge cold rolled steel side panels are flanged for added strength. They are punched to accommodate popular configurations of XLR type and 1/4" connectors. All panels are single rack height. Finished in black powder coat.

Startech 2 Port USB A Female Low Profile Slot Plate Adapter – USB Panel. Each $6.38 Manufacturer: Startech Computer Products. Each. This 2 Port USB A Female Low Profile Slot Plate converts the USB pins from most AT style Pentium (and newer) motherboards to 2 standard USB A style ports. The plate can be mounted on the rear panel of a comp

Samlex SBC2 SBC2 Solar Panel Branch Connectors Package Includes 1 Female Connector#44; 1 Male Connector $90.36 Contains:. 2 x solar panel branch connectors. Packaged in pairs female male per package; also sold as accessories. Design Features:. easy to install. snapin type of safety locking tabs. contacts are sealed against ingress of dust and water.

Startech 2 Port USB 3.0 A Female Low Profile Slot Plate Adapter – USB Panel – 1.6 Ft. Each $17.38 Manufacturer: Startech Computer Products. Each. Type: USB panel Technology: Shielded Cable Features: Low profile Length: 1.6 ft Connector(s): 2 x 9 pin USB Type A – female Connector(s) (Other Side): 1 x 20 pin IDC – female Compliant Standards: USB 3.0 Col

V7 DVIIM-VGAF DVI Analog Panel Monitor Cable Adapter – DVI-I Male to 15-pin HD-15 Female $1.49 The Extron DVIIM VGAF DVIIF is a DVI I male to 15 pin HD female and DVI I female Y adapter designed for connecting HDTV receivers and graphics cards to both digital displays with digital DVI I inputs and analog RGBHV A V systems. The DVI I male to VGA female and DVI I female Y adapter supports high resolution RGBHV and HDTV video signals. The DVIIM VGAF DVIIF is terminated with a DVI I male connector with the analog contacts terminated to the 15 pin HD female connector and the digital contacts terminated to the DVI I female connector.

Cables To Go 42187 Rapidrun Hd15 Rgbhv Female Panel Mount Lead $23.23 RapidRuntrade; is designed to be the standard for inwall Audio/Video installations. The RapidRun system allows for a customized installation to create an ideal Audio/Video solution. BreakAway Flying Leads and Wall Plates ensure flexible efficient high quality connections for all types of equipment. Visit our RapidRun Information Center to learn more about how RapidRun works. This Flying Lead is used when panel mount female HD15 RGBHV connector is needed such as a pass through wall plate or floor box. Whether hanging a projector in a classroom or installing a commercial digital signage system a clean crisp signal can be ensured. BreakAway terminations are available in both Flying Leads and Wall Plates and are also available in different lengths and colors to meet the requirements of the installation. Determine the proper setup for your installation by using the RapidRun configurator. Common Applications: Education Learning and Collaboration u Classroom Setup Transmitting Video from PC to a Projector Digital Signage u From PC/Distribution System to Remote Display SOHO/Large Office Productivity u Remote Desktop Display from a Central PC Features: Color Code: Blue For use with Multimedia Runners Supports resolutions up to 1280×1024 Supports transmission of Component Video signals Fully molded connector provides excellent strain relief and easy installation into wall plate or bracket Please note: To complete the RapidRun system each Runner will need 2 Flying Leads 2 Wall Plates OR 1 Flying Lead and 1 Wall Plate.

Rosewill RCW-702 DVI-I ( 24+5 ) Female to Female Adapter $4.99 Type: DVI-I ( 24+5 ) Female to Female Features: Extension for Connectors of DVI-D 24-pin Male Dual link digital signaling allows for high speed transmission up to 9.9Gbps Gold-plated contacts provide full conductivity with no data loss Supports hot plugging of DVI display devices PC and Mac compatible Resolutions up to 2048 x 1536 Supports digital signals Compatible with flat panel displays, digital CRT displays, projectors, and HDTV Parts: 1 year limited Labor: 1 year limited

Seismic Audio – SAPT15 – Mini XLR Female Connector $4.79 Buy high quality mini 3 pin xlr female connectors to replace, repair, or build your microphone cables. Free Shipping on all cable and panel mount connector parts.

RCA Female To Female Connector $5 RCA Female To Female Connector

F female to BNC female $1.71 F female to BNC female.

Female BNC to Female BNC $6.85 Female BNC to female BNC.

HDMI FEMALE TO FEMALE IN LINE $22.99 HDMI FEMALE TO FEMALE IN LINE

HDMI FEMALE TO FEMALE COUPLER $5.99 HDMI FEMALE TO FEMALE COUPLER

DVI Female to HD15 Male VGA Adapter $3.08 Use to convert VGA cables to DVI compatibilityCompatible with Flat Panel Displays, Digital CRT Displays, Projectors, and HDTVPVC molded hood with copper foil shieldingDVI-I Dual Link Female (29P) to HD-15 Male (15P)Color: Office WhiteCompact DVI cable AdaptersAdditional DVI Adapters can be found here 83-9870 DVI-I Dual Female Male to DVI-D Single Male Adapter 83-9872 DVI-A 17-pin male to HD DB15 VGA female DVI Standards DVI Standards and Explanations

PANEL $33.12 PANEL PANEL

Belkin 12 ports Patch panel $72.99 12 12 ports Patch panel 12 x RJ-45 Female 19″ 110 type termination EIA/TIA-568 Category 6 Belkin Belkin International, Inc Black F4P638-12-AB5 Network Patch Panel RJ-45 www.belkin.com

Cables To Go Panel-Mount Connector $13.99 1 x XLR Female 1.12 oz 40663 Audio Connector Cables To Go Lifetime Metallic Silver Panel-Mount Connector XLR www.cablestogo.com

Usbpnlafhd1 – Startech.Com 1 Ft Panel Mount Usb Cable – Usb A To Motherboard Header Cable F/F – Type A Female Usb $4.8 this 1ft Usb to Panel Mount Usb Cable Features a 5-pin Motherboard Header Connection on One End And a Panel Mount Usb A (female) Port on The Other, Providing a Simple And Easy to Access Usb 2.0 Port on a Panel Mount Recepticle. The Usb Panel Mount Cable Offers a Convenient Solution For Connecting Bootable Thumb Drives or Authentication Fobs Etc. to The Motherboard Usb Connection. The Usb 5-pin Motherboard Header to Panel Mount Usb Cable is Backed by Startech.com’s Lifetime Warranty. [2547708] UPC: 065030835428 UNSPC: 26121600 2.3L x 4.6W x 0.4H 0.05 LB 1 Cubes

Usbpnlafam1 – Startech.Com 1 Ft Panel Mount Usb Cable A To A – F/M – Type A Male Usb – Type A Female Usb – 1Ft – Black $4.8 this 1ft Usb 2.0 Panel Mount Cable A to A F/m Features a Usb Type A Male Connector on One End, And a Usb Panel Mount (female) Molded Connector on The Other, Providing a Well-secured, Easy to Access Usb Connection on Any Machine Port or Faceplate. The Usb Panel Mount Cable is Backed by Startech.com’s Lifetime Warranty. [2536267] UPC: 065030835404 UNSPC: 26121600 7.6L x 4.1W x 0.2H 0.05 LB 1 Cubes

Female/Female UHF Adaptor $11.35 Female/female UHF type adapter.

Ada-Dvi-Ff – Gefen Dvi Mate – Dvi-I Female To Dvi-I Female $43.21 connect Multiple Cables And Create a Longer Run! provides a Simple, Economical Adaption From a Dvi Male Connector to a Dvi Female Connector, Enabling Flat Panel Digital Display Extension (when The Flat Panel Display Has an Attached Male-dvi Terminated Connector Cable). With The Dvimate, Any Dvi Cable (with Male to Male Connectors) Can be Converted to a Female Connector in Order to be Extended. [T41687] UPC: 845344000671 UNSPC: 43201500 2.5L x 2.5W x 0.75H 0.07 LB

PowerFilm RA-2 Female Cigarette Lighter Adapter $9.99 POWERFILM RA-2 FEMALE CIGARETTE LIGHTER ADAPTERFemale Cigarette Lighter AdpaterDirectly charge any wireless electronics device with its 12v cigarette lighter adapterIncludes professional marine-grade connector ready to attach to your PowerFilm® Solar Panel

DVI Male to HD15 Female VGA Adapter $3.7 Easily convert standard VGA cables for use with DVI devicesWorks with flat panel monitors, digital CRT, projectors, HDTVs, and moreConnectors: DVI-A (17P) male to HD-15 (15P) femalePVC molded hood with copper foil shieldingColor: Office WhiteCompact DVI Cable AdaptersAdditional DVI Adapters can be found here 83-9870 DVI-I Dual Female Male to DVI-D Single Male Adapter 83-9873 DVI-I Dual Female to HD15 Male Adapter DVI Standards DVI Standards and Explanations

35Baypanelbk – Startech.Com 3.5In Black Multi Port Panel For Front Drive Bay With Esata – Type A Female Usb $31.4 add Front Panel Access to Usb 2.0, Esata, Firewire And Audio Input Ports this Multi Port Front Drive Bay Panel Allows You to Access Usb, Esata, Firewire And Audio Input Ports From The Front of a PC Computer Case. the Panel Can be Installed Into Any 3.5in Front Panel Drive Bay to Provide 4 Usb 2.0 Ports, an Ieee1394a Firewire Port, Speaker And Mic Ports, And an External Sata (esata) Port For Convenient Quick Connectivity to External Storage Devices. the 3.5in Black Multi Port Front Drive Bay Panel Also Includes an Ieee1394a Firewire Cable That Allows You to Extend a Rear Panel Firewire Connection to The Bay Panel, For Motherboards That Don’t Offer an On-board Firewire Connection. [2220780] UPC: 065030830539 UNSPC: 26121600 2.9L x 4W x 1.1H 0.7 LB 0.05 Cubes

Female BNC to female BNC Adaptor $2.78 Female BNC to female BNC.

StarTech.com USB 3.0 Front Panel 4 Port Hub – 3.5 5.25in Bay – 4 x 9-pin Type A Female USB 3.0 USB External, 1 x 9-pin Type… $46.78 StarTech.com USB 3.0 Front Panel 4 Port Hub – 3.5 5.25in Bay – 4 x 9-pin Type A Female USB 3.0 USB External, 1 x 9-pin Type…

Supermicro USB Serial Panel $17.99 1 x 9-pin DB-9 Male 2 x Type A Female USB 3 Black CSE-PT40L-B DB-9 Data Transfer Cable Adapter Retail RoHS Supermicro Supermicro Computer, Inc Type A USB Serial Panel Yes www.supermicro.com

Seismic Audio – SAPT12F – 3 Pin XLR Female Connector $2.99 Buy high quality 3 pin xlr female connectors to replace, repair, or build your microphone cables. Free Shipping on all cable and panel mount connector parts.

Seismic Audio – SAPT13 – 4 Pin XLR Female Connector $4.79 Buy high quality 4 pin xlr female connectors to replace, repair, or build your microphone cables. Free Shipping on all cable and panel mount connector parts.

Seismic Audio – SAPT29 – 3 Pin Mini XLR Female Connector $4.79 Buy high quality 3 pin xlr Mini female connectors to replace, repair, or build your microphone cables. Free Shipping on all cable and panel mount connector parts.

12 Flexible XLR Male-Female Microphone Gooseneck – Black $9.46 Ideal for use as a podium microphone stand, or a panel mount microphone stand, these goosenecks feature a male and female XLR connection and are perfect for custom applications.12″ lengthBlackSuggested retail price: $14.99Sold individually

12 Flexible XLR Male-Female Microphone Gooseneck – Chrome $9.46 Ideal for use as a podium microphone stand, or a panel mount microphone stand, these goosenecks feature a male and female XLR connection and are perfect for custom applications.12″ lengthChromeSuggested retail price: $14.99Sold individually

16 Flexible XLR Male-Female Microphone Gooseneck – Black $10.8 Ideal for use as a podium microphone stand, or a panel mount microphone stand, these goosenecks feature a male and female XLR connection and are perfect for custom applications.16″ lengthBlackSuggested retail price: $16.99Sold individually

16 Flexible XLR Male-Female Microphone Gooseneck – Chrome $10.8 Ideal for use as a podium microphone stand, or a panel mount microphone stand, these goosenecks feature a male and female XLR connection and are perfect for custom applications.16″ lengthChromeSuggested retail price: $16.99Sold individually

Thyroid Add-On Panel Blood Test $73.33 Thyroid Add-On Panel Item Catalog Number: LCTHYROID Life Extension® strongly recommends getting the Thyroid Add–on Panel to the Male or Female Life Extension Panels, especially for those interested in weight loss. The thyroid gland primarily produces T4 which converts to T3,

Startech DB25 Parallel Female To IDC 25 Pin Header Slot Plate – Parallel Panel – 1.3 Ft. Each $6.06 Manufacturer: Startech Computer Products. Each. This 25-pin Parallel to 25-pin Header Slot Plate features one DB25 Female connector and one IDC 25 connector. Constructed of only top quality components, StarTech.com’s Parallel Slot Plate adapter offers a c

4 Pin Square Panel Mount Solderless Connector .093 Female Housings $1.34 Commonly used for maintenance on all types of equipment. Natural nylon color.

12 Pin Square Panel Mount Solderless Connector .093 Female Housings $1.86 Commonly used for maintenance on all types of equipment. Natural nylon color.

1.5ft Panel-Mount USB 2.0 A Male to A Female Cable $8.99 Build USB 2.0 functionality into a custom system with a secure and efficient fixed port. Provide access to a PC printer projector or other USB device with minimal exposure

4 Port USB A Female Slot Plate Adapter – USB Panel $5.99 The StarTech.com USB Plate is an adapter cable with a plate that converts the USB pins from most AT style Pentium and newer motherboards to 4 standard USB A-Style sockets.

Cables To Go 40663 XLR PANEL MOUNT FEMALE CONNECTOR $19.21 Ideal for building wall plates patch panels or repairing mixing boards. Color: Silver. Stay up to date with the latest technology on the market. Ensures you have the latest options with today s products.

Dppnlfm3Pw – Startech.Com 3 Ft Powered Displayport Panel Mount Cable With Power – Displayport Male Digital Audio/Video – Displayport Female Digital Audio/Video $25.16 the Dppnlfm3pw 3-foot Powered Displayport Panel Mount Cable Features a Displayport Male Connector on One End And a Displayport Panel Mount (female) Molded Connector on The Other, Providing a Well-secured, Easy to Access Displayport Connection on Any Machine Port or Faceplate. If Power is Required, The Displayport Cable Uses All 20 Pins And Can Deliver Power Accordingly. backed by Startech.com’s Lifetime Warranty. [44951W] Truck Delivery UPC: 065030840866 UNSPC: 26121600 7.87L x 8.86W x 0.04H 0.24 LB 1 Cubes

Female Clown $79.99 Female Clown

Female Jester $249.99 Female Jester

A+ Female Urinal $20.99 A+ Female Urinal

Kill Female $10 Kill Female

FEMALE PINS $12.99 FEMALE PINS

Female F to Female UHF Adaptor $8.7 Female “F” to female UHF adapter.

RJ11 In-Line Coupler Female to Female $1.86 Modular coupler female-female Ivory

Black Female To Female BNC Connector $3.99 Black Female To Female BNC Connector

RCA Female to Female XLR – Nickel $3.7 RCA female to female XLRNickel finish

RCA Female to Female XLR – Gold $4.76 RCA female to female XLRGoldl finish

F female to BNC Female Gold $1.81 Gold “F” female to BNC female.

Female N to Female N Connector $4.69 Female “N” to female “N” adapter.

Female UHF to Female UHF Adaptor $3.1 Female UHF to female UHF adapter.

Startech DB25 Parallel Female To IDC 25 Pin Header Slot Plate – Parallel Panel. Each $3.72 Manufacturer: Startech Computer Products. Each. This 25-pin parallel header slot plate turns a 25-pin motherboard parallel header into a parallel port on the rear panel of your computer chassis, for cost-effective and convenient parallel peripheral connec

Monster / FEMALE TO FEMALE ADPTR / AFRFHMKII $28.05 Monster – FEMALE TO FEMALE ADPTR – AFRFHMKII

RS530 DATA CABLE FEMALE/FEMALE $47.99 RS530 DATA CABLE FEMALE/FEMALE

Female RJ-11 and Female Rj-45 Pass $16.99 Female RJ-11 and Female Rj-45 Pass

1 ft eSATA Panel Mount Cable – F/M $6.99 Extend your eSATA Interface and Screw-mount it into a Panel. This 1-foot panel mount eSATA cable features an eSATA male connector on one end and an eSATA panel mount (female)

USB 2.0 Female 2 Ports Rear Panel to USB Header Motherboard Cable $5.49 Description:High quality USB 2.0 Motherboard Cable is perfect for connecting additional USB 2.0 ports on motherboardsThis 2 Port USB Motherboard Cable adds 2 external USB ports to your computer.Enable your motherboard USB port function.It is compatible with motherboards that have a USB header.This Rear Panel Motherboard Cable is easy to install.Rear Panel Motherboard Cable Length: 25cmWeight: 27.7gPackage Included:1 x 2 Port USB Motherboard Cable (no bracket)

Female To Female Adptr $17.99 MONSTER CABLE AFRFHMKII PHONOLINK® FEMALE-TO-FEMALE ADAPTER (MODEL NO. AFRFHMKII)

Premium woven two-panel rib support belts for female Fits 24-48 inches Universal White Model No : 34-4200 – 1 ea $15.76 Two-panel woven elastic stabilizes rib and sternum fractures by limiting expansion through compression.

3 ft HDMI Panel Mount Cable $12.99 1 x HDMI Female 1 x HDMI Male 2.40 oz 3 ft HDMI Panel Mount Cable 36″ This 3ft panel mount HDMI cable features a HDMI male connector on one end, and a HDMI panel mount (female) molded connector on the other, providing a well-secured, easy to access HDMI connection on any machine port or faceplate. CMG Rated A/V Cable Bagged Black Copper HDMI HDMIPNLFM3 Lifetime Molded Not Applicable PVC RoHS StarTech.com Yes www.startech.com

Majestic Women’s Cool Base Hipper Softball Pants – Female Softball Uniforms $39.99 Cool Base technology keeps players cool and comfortable. Ban-Rol waistband with gripper elastic. Pro-style belt loops. Ventilated panel behind knee. polyester. Imported. Womens Sizes S – XL. Colors White, Black, Navy.Female Softball Uniforms – Female Softball Uniforms

Kingwin ADP04 DviD Male To Vga Hd 15 Female Adapter $19.23 DVID Male to VGA HD 15 Female Adapter. Model: ADP04. Connect VGA/SVGA Monitor cable to DVI plug. Compatible with flat panel displays digital CRT displays projectors and HDTV. Supports hot plugging of DVI display devices.

StarTech.com Panel Mount USB Cable to Motherboard Header $8.99 0.81 oz 1 x 5-pin IDC Female Parallel 1 x Type A Female USB 2.0 USB 12″ 2 This 1ft USB to Panel mount USB cable features a 5-pin motherboard header connection on one end and a panel mount USB A (female) port on the other, providing a simple and easy to access USB 2.0 port on a panel mount recepticle. The USB panel mount cable offers a convenient solution for connecting bootable thumb drives or authentication fobs etc. to the motherboard USB connection. The USB 5-pin motherboard header to panel mount USB cable is backed by StarTech.com’s Lifetime Warranty. Black Data Transfer Cable Adapter IDC Lifetime PVC Panel Mount USB Cable to Motherboard Header RoHS StarTech.com Type A USBPNLAFHD1 Yes www.startech.com

Dppnlfm3 – Startech.Com 3Ft Displayport Panel Mount Cable – F/M – Displayport Male Digital Audio/Video – Displayport Female Digital Audio/Video – 3Ft – Black $16.54 this 3ft Panel Mount Displayport Cable Features a Displayport Male Connector on One End, And a Displayport Panel Mount (female) Molded Connector on The Other, Providing a Well-secured, Easy to Access Displayport Connection on Any Machine Port or Faceplate. [2599170] UPC: 065030837026 UNSPC: 26121600 5.7L x 7.3W x 0.8H 0.2 LB 1 Cubes

Hdmipnlfm3 – Startech.Com 3 Ft Standard Hdmi Cable For Panel Mount – F/M – Hdmi – 3 Ft – 1 X Hdmi Female – 1 X Hdmi Male – Black $10.28 This 3ft Panel Mount Hdmi Cable Features a Hdmi Male Connector on One End, And a Hdmi Panel Mount (female) Molded Connector on The Other, Providing a Well-secured, Easy to Access Hdmi Connection on Any Machine Port or Faceplate. [2599175] UPC: 065030837033 UNSPC: 26121600 5.7L x 7.2W x 0.8H 0.3 LB 1 Cubes

Esatapnlfm1 – Startech.Com 1 Ft Esata Panel Mount Cable – F/M – Sata For Hard Drive – 1Ft – 1 Pack – 1 X Female Esata – 1 X Male Sata – Red $5.31 This 1-foot panel mount eSATA cable features an eSATA male connector on one end, and an eSATA panel mount (female) molded connector on the other, providing a well-secured, easy-to-access eSATA connection on any machine port or faceplate. Backed by StarTech.com’s Lifetime Warranty [3109053] UPC: 065030844390 UNSPC: 26121624 9L x 4.5W x 0.05H 0.05 LB

1ft Panel Mount USB Cable A to A – F/M $19.99 Features a USB type A male connector on one end and a USB panel mount (female) molded connector on the other providing a well-secured easy to access USB connection on any m

Female TNC to Female TNC Adaptor $4.59 Female TNC to female TNC type connector.

Cables To Go 28067 1.5Ft Usb 2.0 A Female To B Male Panel Mount Cable $21.7 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB A Female to USB B Male Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Cables To Go 28072 1.5Ft Usb 2.0 B Female To B Male Panel Mount Cable $21.7 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB B female to USB B male Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Cables To Go 28063 2Ft Usb 2.0 A Male To A Female Panel Mount Cable $22.05 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB A male to USB A female Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Cables To Go 28060 6In Usb 2.0 A Male To A Female Panel Mount Cable $20.79 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB A male to USB A female Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Cables To Go 28073 2Ft Usb 2.0 B Female To B Male Panel Mount Cable $22.05 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB B female to USB B male Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Cables To Go 28065 6In Usb 2.0 A Female To B Male Panel Mount Cable $20.79 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB A female to USB B male Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Cables To Go 28070 6In Usb 2.0 B Female To B Male Panel Mount Cable $20.79 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB B Female to USB B Male Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Cables To Go 28061 1Ft Usb 2.0 A Male To A Female Panel Mount Cable $21.35 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB A male to USB A female Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Cables To Go 28066 1Ft Usb 2.0 A Female To B Male Panel Mount Cable $21.35 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB A female to USB B male Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Cables To Go 28069 3Ft Usb 2.0 A Female To B Male Panel Mount Cable $21.28 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB A female to USB B male Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Cables To Go 28062 1.5Ft Usb 2.0 A Male To A Female Panel Mount Cable $21.7 Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC printer projector or other device with minimal exposure or repositioning. From basic port reroutes in a PC to connections at podiums and kiosks panelmount cables are a great way to keep your connections clean and professional. Featuring molded screwstyle connectors and USB 2.0 compatibility these cables are available in various configurations and lengths to meet your exact specifications. Features: Connectors: USB A male to USB A female Molded hood provides easy connection to a faceplate or machined port Twisted pair construction minimizes crosstalk and data transfer errors Foil and braid shields prevent unwanted EMI/RFI interference Fully compliant with USB 1.0 1.1 and 2.0 specifications Includes one pair of 440 screws and nuts

Belkin Cat5e Patch Panel $151.99 19″ 48 48 x RJ-45 Female Network EIA/TIA-568 Cat5e Accepts 110 punchdown tools Supports both T568A and T568B installations Supports 568A and 568B installations Belkin Patch panels support multiple labeling systems, accept both 568A and 568B wiring schemes, and ship with an included strain-relief bar. Integration Series CAT6 system patch panels are optimized to seamlessly interface with integration Series bulk cable and patch cables. Impedance-matched components ensure end-to-end CAT6 performance throughout a structured cabling infrastructure. Belkin Belkin International, Inc C-PP5-48-F-BK Cat5e Patch Panel Lifetime Network Patch Panel RJ-45 www.belkin.com

CP TECH WAN-2140 Panel Antenna $69.99 14 dBi – 2.50 GHz 2.40 GHz to 2.50 GHz LevelOne WAN-2140 outdoor grid antenna is a high performance directional flat patch WiFi antenna suitable for indoor/outdoor directional applications. This antenna increases wireless signal coverage and improves signal strength/quality for existing 802.11b/g wireless devices in the range between 2.4Ghz to 2.5Ghz frequency bands. CP TECH CP Technologies Directional LevelONE WAN-2140 Panel Antenna N-type Female Panel Antenna WAN-2140 Wireless Data Network www.cptechusa.com

DVI-I Male to HD-15 Female Video Adapter $5.48 Digital Visual Interface (DVI) is the standard interface for a high-performance connection between PCs and flat panel displays, digital CRT displays, projectors, and HDTV. DVI Adapters from Cables To Go deliver the high-performance, high-bandwidth interface needed for video displays of today while leaving headroom for the products of tomorrow. These precision-engineered adapters are fully compliant with the DVI standard defined by DDWG (Digital Display Working Group). The DVD-I dual link configuration provides enough bandwidth for resolutions up to 1600 x 1200 and is designed for high-speed digital and analog use. Main FeaturesManufacturer: Cables To GoManufacturer Part Number: 26956Manufacturer Website Address: www.cablestogo.comNumber of Connectors: 2Connector Details: 1 x 29-pin DVI-I Male , 1 x D-Sub (HD-15) Female Color: BlueWeight: 0.1 lb Standard Warranty: Lifetime

F-Type Plug to RCA Female Jack Adapter $1.06 Used to easily transition from an RCA male terminated patch cable to a male F-type plug. Handy adapter for patch panel moves, adds and changes.

Female Intuition $6 Female Intuition – Jordyn Taylor

Wilson Dual-Band Panel Antenna $52.99 0.83″ x 0.71″ x 0.17″ 1.32 lb 1.5: 1.71 GHz to 2.50 GHz 10 dBi – 2.50 GHz 301135 45° Vertical – 2.50 GHz 50 Ohm 50° Vertical – 960 MHz 60° Horizontal – 2.50 GHz 7 dBi – 960 MHz 70° Horizontal – 960 MHz 800 MHz to 960 MHz 90 Dual-Band Panel Antenna Mounting Hardware This dual-band panel antenna is vertically polarized. For optimum performance, install the antenna with the cable running from the bottom or the top. If the antenna is installed with the N-connector or cable running horizontally, the signal will be degraded. VSWR: < 1.5 Dual-Band Panel Antenna N-type Female Panel Panel Antenna Vertical Wilson Wilson Electronics, Inc Wireless Data Network www.wilsonelectronics.com

MRP ADDVIAMHD15F Analog Male to HD15 Female Adapter $19.63 Digital Visual Interface (DVI) is the standard interface for a highperformance connection between PCs and flat panel displays digital CRT displays projectors and HDTV. DVI Adapters from Cables To Go deliver the highperformance highbandwidth interface needed for video displays of today while leaving headroom for the products of tomorrow. These precisionengineered adapters are fully compliant with the DVI standard defined by DDWG (Digital Display Working Group). The DVDA analog configuration adapts an existing VGA cable for use with an analog DVII device. Connectors: DVII 29pin Male to HD15 Female. Adapts to an existing VGA cable for use with an analog DVII device. Dual link digital signaling allows for high speed transmission up to 9.9Gbps. Goldplated contacts provide full conductivity with no data loss. Supports hot plugging of DVI display devices. PC and Mac compatible. Resolutions up to 1600 x 1200. Supports analog signals. Compatible with flat panel displays digital CRT displays projectors and HDTV. Meets DVI DDWG Standard.

Tripp Lite N252-048 Cat6 Network Patch Panel $109.99 2U 19″ Rack-mountable 48 48 x RJ-45 Female Lifetime N252-048 N252-048 Cat6 Network Patch Panel N252-048 Cat6 Network Patch Panel offer you all the functionality and compatibility as any name brand. Each panel comes with 110-type termination, while meeting and exceeding EIA/TIA TSB-40 Category 6 connecting hardware specifications. Network Patch Panel RJ-45 Tripp Lite www.tripplite.com

Tripp Lite N050-012 Cat5e Network Patch Panel $30.99 12 12 x RJ-45 Female N050-012 Cat5e Network Patch PanelCat5e Wall Mount Patch Panel 568B-12 PortMounting Bracket Tripp Lite’s Cat5e wall-mount patch panel guarantees compatibility with all networks. Color coded for both EIA/TIA 568a & 568b installations. Panel comes with 110-type termination blocks. This 12″ panel effortlessly mounts to a wall or desk with two “C” brackets. Mounting bracket is provided. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Lifetime N050-012 N050-012 Cat5e Network Patch Panel Network Patch Panel RJ-45 Tripp Lite Wall-mountable www.tripplite.com

RJ45 In-Line Ethernet Coupler Female to Female $1.54 Modular coupler female-female Ivory

Seismic Audio – SAPT29 (4 Pack) – 3 Pin Mini XLR Female Connector $14.49 Buy packs of four high quality 3 pin mini xlr female connectors to replace, repair, or build your microphone cables. Free Shipping on all cable and panel mount connector parts.

KINGWIN ADP-04 DVI-D Male (24+1 pin) To VGA HD 15 Female Adapter $5.99 Type: DVI (Male) to VGA (Female) Features: Connect VGA/SVGA Monitor cable to DVI plug Compatible with flat panel displays, digital CRT displays, projectors and HDTV Supports hot plugging of DVI display devices

Rexus DVI-VGA DVI Male Dual-link to VGA Female Adapter $3.99 Type: DVI (Male) to VGA (Female) Specifications: Connectors: DVI-I 29-pin Male to HD15 Female Features: Adapts to an existing DVI-I cable for use with a VGA plug Dual link digital signaling allows for high speed transmission up to 9.9Gbps Supports hot plugging of DVI display devices PC and Mac compatible Resolutions up to 1600 x 1200 Supports digital and analog signals Compatible with flat panel displays, digital CRT displays, projectors, and HDTV Meets DVI DDWG Standard Parts: 1 year limited Labor: 1 year limited

StarTech.com 2 Port USB A Female Slot Plate Adapter Cable $8.99 11.25″ 2 Port USB A Female Slot Plate Adapter Cable 2 x 5-pin 2 x Type A Female USB 2.0 USB USBPLATE wiring scheme: Red=Power, Green=Signal, White=Signal, Black=Ground Separate cables support a single row of 8/10 pins or 2 rows of 4/5 motherboard connections This 2 Port USB A Slot Plate converts the USB pins from most AT style Pentium (and newer) motherboards to 2 standard USB A-Style ports. The plate can be mounted on the rear panel of a computer case, adding two USB A female ports for simple connection to USB peripheral devices. Copper Data Transfer Cable StarTech.com Type A USB USBPLATE www.startech.com

Belkin 12 Port Wall Mount Patch Panel $74.99 12 12 Port Wall Mount Patch Panel 12 x RJ-45 Female EIA/TIA-568 Category 5e What is a patch panel? Think of it as an old fashioned switchboard. A place where network connections are made and often rearranged, guiding the information to the correct destination, each and every time. And since you don’t want to change your patch panel every time you upgrade your network, we’ve built this one to meet the new enhanced Category 5e requirements. Available in 12 ports. This panel mounts on a wall and supports both 568A and 568B installations. Belkin Belkin International, Inc F4P338-12AB5-WM Network Patch Panel RJ-45 www.belkin.com

Tripp Lite 12-Port Cat6 Patch Panel $39.99 12 12 x RJ-45 Female Network 12-Port Cat6 Patch Panel 1U Rack-mountable Tripp Lite’s Category 6 Patch Panels offer you all the functionality and compatibility as any name brand. Each panel comes with 110-type termination, while meeting and exceeding EIA/TIA TSB-40 Cat6 connecting hardware specifications. N252-012 Network Patch Panel RJ-45 RoHS Tripp Lite Yes www.tripplite.com

Startech Parallel Panel. Each $2.89 Manufacturer: Startech Computer Products. Each. StarTech.com come through again with this 25-pin Parallel to 25-pin Header Slot Plate for your computer. Featuring DB25 Female, IDC 25 connectors and built with only top-quality components, StarTech.com make

Digiwave WAP58231 5.8G Panel Antenna $119.5 5.8 GHz Panel Antenna. Supports Wifi systems using 5.8 Ghz Spectrum. Universal connector fits most all routers and USB adapters. Frequency range: 51505800MHz. Bandwidth: 650MHz. Gain: 23dBi. AZ/EL BW(deg;):15/7. F/B Ratio(dB): gt;32. VSWR(50 Ohm): lt; 1.7. Polarization: Vertical. Max power: 100W. Connector: N Female. Input impedance(Omega;): 50. Size: 390x390x40 (mm).

Majestic Women’s Cool Base Capri Softball Pants – Female Softball Uniforms $29.99 Cool Base technology keeps players cool and comfortable. Ban-Rol waistband with gripper elastic. Drawstring waistband. Ventilated panel behind knee. polyester. Imported. Womens Sizes S – XL. Colors Black/White, White/Black, White/Royal, White/Navy, White/Scarlet, Navy/White, White/White.Female Softball Uniforms – Female Softball Uniforms

Under Armour Women’s Clutch Shorts – Female Softball Sliding Shorts $24.99 Lightweight mesh fabrication with moisture transport keeps athlete cool and dry. Multisport compliant. UPF protection and anti-odor technology. Color block side panel and roll over waistband. inseam. polyester. Imported. Adult Womens XS – XL. Colors Black/White, Scarlet/White, Navy/White, Royal/White, Forest/White, Maroon/White, Light Blue/White, Purple/White, Pink/White, Cardinal/White, Orange/White.Female Softball Sliding Shorts – Female Softball Sliding Shorts

SABRENT AD-RTHD DVI Male to HDMI Female Video Rotating Adapter $8.99 Type: DVI (Male) to HDMI (Female) Features: Adapts to an existing VGA Device with DVI Port and translate it to HDMI port High quality contacts provide full conductivity with no data loss PC and Mac compatible Resolutions up to 1600 x 1200 Compatible with flat panel displays, digital CRT displays, projectors, and HDTV Meets DVI DDWG Standard

USB gender changer (A) female to (A) female $6.99 Connect a USB Type A female plug to a Type A female plug. Available in black.

Qvs Mini Displayport Male To Vga Female Digital Video Adapter $44.11 Connects MacBook MacBook Pro or MacBook Air with Mini DisplayPort to Apple Cinema Display flat panel monitor HDTVs STB DVD or projector with HDMI video port. Supports both video mirroring and extended desktop modes. Also supports mini DisplayPort 1.1a compliant receiver offering 5.4Gbps bandwidth over 2 lanes and video resolution up to 1080p. Integrated triple 10 bit 162MHz video DAC for analog VGA. Mini DisplayPort male to VGA female connectors

Qvs Mini Displayport Male To Hdmi Female Digital Video Adapter $31.73 Connects MacBook MacBook Pro or MacBook Air with Mini DisplayPort to Apple Cinema Display flat panel monitor HDTVs STB DVD or projector with HDMI video port. Also works with PCs with highend video addon cards that provide Mini DisplayPort. Supports both video mirroring and extended desktop modes Mini DisplayPort 1.1a input to HDMI 1.3b output video resolutions up to 1080p 225MHz/2.25Gbps per channel bandwidth and 12 bits per channel Deep Color. MiniDisplayPort male to HDMI female connectors

Female to Female RCA Adapter $1.99 Female to Female RCA Adapter. All of our audio video connectors are precision crafted to give you a tight video connection.

Female to Female BNC Connector $1.99 Female to Female BNC Connector. Precision crafted BNC connectors are fast and easy to connect, giving you a tight connection for reliable video.

Adtran 8-port Breakout Box – Breakout Panel. Each $133.66 Manufacturer: Adtran. Each. The 8-port Breakout Box eliminates the need for punch-down block and cable for installs requiring less than 8 analog ports. Type: Breakout panel Connector(s): 8 x RJ-48C – female Customers also search for: Discount ADTRAN 8-po

Comtrol RocketPort Interface – serial panel. Each $390.17 Manufacturer: Comtrol Corporation. Each. Type: Serial panel Connector(s): 16 x 25 pin D-Sub (DB-25) – female Compliant Standards: EIA-232/422/485 Manufacturer Warranty: 5 years warranty Customers also search for: Discount Comtrol RocketPort Interface – se

Cables Unlimited 12 Port Cat6 Patch Panel $35.99 12 12 Port Cat6 Patch Panel 12 x RJ-45 Female Universal 110 IDC punch down termination Patented PCB designed to meet Cat 6 Performance Large port numbers and color-coded labels for easy installation Cables Unlimited Compliant with EIA/TIA Cat 6, Draft 11 Keep your sever room and wiring closet organized with this high performance 12-port Cat6 patch panel. This panel is compliant with EIA/TIA category 6, draft 11 specifications and features 110 IDC punch down terminations that can be wired in ether 568A or 568B configuration. Lifetime Network Patch Panel RJ-45 UTP-9012 www.cablesunlimited.com

Cables Unlimited 48 Port Cat6 Patch Panel $92.99 48 48 Port Cat6 Patch Panel 48 x RJ-45 Female Patented PCB designed to meet Cat 6 Performance Large port numbers and color-coded labels for easy installation Universal 110 IDC punch down termination Cables Unlimited Compliant with EIA/TIA Cat 6, Draft 11 Keep your sever room and wiring closet organized with this high performance 48-port Cat6 patch panel. This panel is compliant with EIA/TIA category 6, draft 11 specifications and features 110 IDC punch down terminations that can be wired in ether 568A or 568B configuration. Lifetime Network Patch Panel RJ-45 UTP-9048 www.cablesunlimited.com

Cables To Go 02941 RJ45 to DB9 Female Modular Adapter $4.99 Type: DB9 to RJ45 Specifications: Connector 1: RJ45 Female Connector 2: DB9 Female Color: Gray Features: Using modular adapters with inexpensive silver satin or flat oval twisted pair wire has become a standard way to run client server applications. Needing to connect dumb terminals on the desktop back to a central patch panel or directly to a MUX via RS-232, many network planners have implemented modular adapters as the most cost-effective way to complete the connections. Whether used in a wiring closet or throughout the office, color-coded modular adapters lend easy identification and differentiation to your cable plan. By color-coding your connections, you reduce troubleshooting time while taking full advantage of the benefits of this modular adapter approach.

Digitial Antenna Multi-Band Panel Antenna – 9dB Gain (426-PW) $98.95 426-PW Multi-Band Panel Antenna Mount: Included wall mount Connector: Highest quality type N female Cable: Not included – use PowerMax™ low loss cables

Tripp Lite N052-048 Cat5e Network Patch Panel $68.99 19″ Rack-mountable 48 48 x RJ-45 Female N052-048 Cat5e Network Patch PanelCat5e Patch Panel 568B-48 Port Tripp Lite’s Enhanced Category 5 Patch Panels offer you all the functionality and compatibility as any name brand. Each panel comes with 110-type termination, while meeting and exceeding EIA/TIA TSB-40 Cat5e connecting hardware specifications. Color coded for both EIA/TIA 568A & 568B installations. 48 ports ensure a wide range of plug-n-play options. The clear numbering on both the front and back of each panel gives you a quick and easy way to identify cable runs and the high density 19in panel design will save you valuable space in on the rack. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. N052-048 N052-048 Cat5e Network Patch Panel Network Patch Panel RJ-45 Tripp Lite www.tripplite.com

Tripp Lite 12 Port Cat6 Patch Panel $39.99 12 12 Port Cat6 Patch Panel 12 x RJ-45 Female Network 12 Port Cat6 Patch PanelCat6 Wall Mount Patch Panel 568B-12 Port w/bracket2 Mounting ScrewsPkg Wire TiesInsruction Sheet Tripp Lite’s Cat6 wall-mount patch panel guarantees compatibility with all networks. Color coded for both EIA/TIA 568a & 568b installations. Panel comes with 110-type termination blocks. This 12″ panel effortlessly mounts to a wall or desk with two “C” brackets. Mounting bracket is provided. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Lifetime N250-012 Network Patch Panel RJ-45 Tripp Lite www.tripplite.com

1ft Panel Mount USB Cable B to B – F/M $19.99 Features a USB type B male connector on one end and a USB panel mount B (female) molded connector on the other providing a convenient solution for custom enclosures.

DC Jack to DC Jack Connector (female/female) $5 DC Jack to DC Jack Connector (female/female)

Gefen ADADVIFFN DVI Female to Female Adaptor (ADADVIFFN) $33.99 Gefen ADADVIFFN DVI Female to Female Adaptor (ADADVIFFN)

1/4 in Mono Female to Female XLR – Nickel $4.81 1/4″ mono female to female XLRNickel finish

14 in Mono Female to Female XLR – Gold $4.42 1/4″ mono female to female XLRGold finish

Female Mini UHF to Female Mini UHF Adaptor $6.74 Female mini UHF to female mini UHF adapter.

Female BNC to Female BNC Bulkhead Mount $5.29 Female BNC to female BNC, bulkhead mount.

Steren Single RCA Female/F Female Adapter251-507 $1 Steren Single RCA Female/F Female Adapter

Steren Single RCA Female/F Female Adapter251-508 $1 Steren Single RCA Female/F Female Adapter

Steren RCA Female/Female Coupler – Brass251-506 $2 Steren RCA Female/Female Coupler – Brass

StarTech.com RCA Female to Female Gender ChangerRCAFF $6 StarTech.com RCA Female to Female Gender Changer

StarTech.com S-Video Female to Female Gender ChangerSVIDFF $7 StarTech.com S-Video Female to Female Gender Changer

Cables To Go / RCA FEMALE TO RJ45 FEMALE / 41154 $30.5 Cables To Go – RCA FEMALE TO RJ45 FEMALE – 41154

Steren Electronics / HDMI FEMALE TO FEMALE IN LINE / 528-006 $29.35 Steren Electronics – HDMI FEMALE TO FEMALE IN LINE – 528-006

CALRAD / HDMI FEMALE TO HDMI FEMALE / 35-707 $21.96 CALRAD – HDMI FEMALE TO HDMI FEMALE – 35-707

QVS / 10FT DB9 FEMALE TO FEMALE / CC2045-10N $17.63 QVS – 10FT DB9 FEMALE TO FEMALE – CC2045-10N

Lorex / BNC FEMALE TO FEMALE CONNECTOR / BNCC $15.85 Lorex – BNC FEMALE TO FEMALE CONNECTOR – BNCC

Cables Unlimited / DB9 FEMALE TO FEMALE / PCM-1960-06 $15.87 Cables Unlimited – DB9 FEMALE TO FEMALE – PCM-1960-06

Cables Unlimited / DB9 FEMALE TO FEMALE / PCM-1960-10 $16.13 Cables Unlimited – DB9 FEMALE TO FEMALE – PCM-1960-10

CALRAD / HD GENDER CHANGER FEMALE-FEMALE / 30-587 $15.36 CALRAD – HD GENDER CHANGER FEMALE-FEMALE – 30-587

CALRAD / HDMI FEMALE TO FEMALE COUPLER / 35-713-A $17.51 CALRAD – HDMI FEMALE TO FEMALE COUPLER – 35-713-A

Wilson / FME female to TNC female Adapter / ACC-3 $13.03 Wilson – FME female to TNC female Adapter – ACC-3

ICC / MODULE, HDMI, FEMALE TO FEMALE, BLACK / IC107HDMBK $24.97 ICC – MODULE, HDMI, FEMALE TO FEMALE, BLACK – IC107HDMBK

(10 PACK) New DVI Male To Dual VGA Female Splitter Cable $7.99 This 6ft DVI-D Digital Flat Panel Display Cable features two male DVI-D (single link) connectors, providing a highly reliable, purely digital connection between high-end video devices (DVD players, HTDV monitors, DVI out Video Cards, etc.). This durable DVI-D cable is designed to provide a high quality digital video experience.

(2 PACK) New DVI Male To Dual VGA Female Splitter Cable $7.99 This 6ft DVI-D Digital Flat Panel Display Cable features two male DVI-D (single link) connectors, providing a highly reliable, purely digital connection between high-end video devices (DVD players, HTDV monitors, DVI out Video Cards, etc.). This durable DVI-D cable is designed to provide a high quality digital video experience.

(5 PACK) New DVI Male To Dual VGA Female Splitter Cable $7.99 This 6ft DVI-D Digital Flat Panel Display Cable features two male DVI-D (single link) connectors, providing a highly reliable, purely digital connection between high-end video devices (DVD players, HTDV monitors, DVI out Video Cards, etc.). This durable DVI-D cable is designed to provide a high quality digital video experience.

(Pack of 10) – Keystone Jack Tooless RJ-45 Cat-6 Blue (RJ45 Cat Tool Less) $28.7 (PACK OF 10 JACKS) Easy to use, tool-less (no soldering or screwdriver req.) modular CAT 6 Keystone jack. RJ45 female connector. To be used with keystone wall plate or panel. Wiring diagram on clip. This product is intended for use with 23~24 AWG Solid Ethernet cable. It will not work well with stranded Ethernet cable. If you’re using stranded Ethernet cable, please use a punch-down style keystone jack. Comes with lever for ease of installation and retaining clip for secure connection.

(Pack of 25) – Keystone Jack Tooless RJ-45 Cat-6 Black (RJ45 Cat) $41.99 (PACK OF 25 JACKS) Easy to use, tool-less (no soldering or screwdriver req.) modular CAT 6 Keystone jack. RJ45 female connector. To be used with keystone wall plate or panel. Wiring diagram on clip. This product is intended for use with 23~24 AWG Solid Ethernet cable. It will not work well with stranded Ethernet cable. If you’re using stranded Ethernet cable, please use a punch-down style keystone jack. Comes with lever for ease of installation and retaining clip for secure connection.

(Pack of 50) – Keystone Jack Tooless RJ-45 Cat5 – White (Cat-5 RJ45 Tool Less) $78.99 (Pack of 50 Jacks) Easy to use, tool-less (no soldering or screwdriver req.) modular CAT 5e Keystone jack. RJ45 female connector. To be used with keystone wall plate or panel. Wiring diagram on clip. This product is intended for use with 23~24 AWG Solid Ethernet cable. It will not work well with stranded Ethernet cable. If you’re using stranded Ethernet cable, please use a punch-down style keystone jack. Comes with lever for ease of installation and retaining clip for secure connection.

1/4" and 3/8" Dual Threaded Female Screw Connector $2.99 This screw connector is made from high purity aluminium alloy which is durable and will not rust. It has standard screw hole, which supports various screws. By using which, you can fix your lamp panel on the tripod.

1/4" and 3/8" Dual-head Female Threaded Screw Adapter for Flash Lamp $2.99 The screw adapter is made from high purity aluminium alloy which is durable and will not rust. It has standard screw hole, which supports various screws. By using which, you can fix your flash lamp panel on the tripod.

2-Port PS/2 Auto KVM Switch w/Cables (Silver) $11.99 2-Port Auto KVM Switch General Features: Silver color Metal case Control two computers with one VGA monitor, PS/2 keyboard and PS/2 mouse Keyboard, mouse and monitor emulation Push button / keyboard hot key selection method Auto scan for monitoring your PC Supports SVGA, VGA, and MultiSync high resolution monitors Plug and Play, no software required Includes two cables with PS/2 and VGA ports (70-inch approximate length) Front Panel Features: PC1 and PC 2 LED indicators Scan/Manual button Reset button Rear Features: Two (2) PC1 and PC2 15-pin male VGA ports (connects to PC) One (1) 15-pin VGA female port (connects to a monitor) Two (2) PS/2 mouse and keyboard ports Unit Dimensions: 1.75 x 5.65 x 3.25-inches (H x W x D, approximate) Regulatory Approvals: FCC CE

304472 Window Mount Panel Antenna 700-2700MHz 75 Ohm Vertically Polarized w/F Female Connector $94.99 304472 Window Mount Panel Antenna 700-2700MHz 75 Ohm Vertically Polarized w/F Female Connector

4:1 (4×1) HDMI 1.3b + Optical Digital Audio Video HDTV Switcher $215 This 4×1 HDMI switcher with digital audio is a Professional HDMI switcher with remote. Simply pressing a button on the remote you can select your desired HDMI source to be routed to a high definition display. Switcher is tested to guarantee resolution up to 1080p without signal degradation. The great advantage of this switcher is that you can now route your digital audio though it as well, rather then separately going in to the receiver. With a click of a button you can switch HDMI ( video ) and Optical or Coaxial Audio. This simple advantage will make you life much easier, you would only have 2 cables going out of the switch (HDMI and Optical or Coaxial), one to the TV and another to an Audio Receiver. 4X1 HDMI Switcher INSTRUCTIONS: Installs in seconds. Connect all the digital video sources to any of the inputs on the switch and connect the output cable to the display. Use a remote control or buttons on the front panel to switch video inputs. We recommend to use high quality HDMI cables for the best signal transfer. Switches 4 Devices to 1 input Port (signals HDMI,Digita Audio, Optical Audio). TECHNICAL SPECIFICATIONS: **Frequency bandwidth: 250 Mbps to 1.65Gbps data rates, **Supports 25 Mhz to 165MHz pixel clocks, **Inputs: 4 x HDMI female ports (Type A connector), 4x Optical, 4 x SPDIF, **Max. Resolution: 1080p, **Power Supply: 5V DC Universal 110/220, **Dimensions: 9 1/2? W x 4 1/2? D x 2? H, **Weight: 6LB. PACKAGE INCLUDES: 4:1 HDMI Switcher w/ Digital Audio, IR Remote control, RS232 Cable, RS232 Software, 12 V Universal Power Supply, User’s Manual

5-Port Audio Video HDMI Switch / Switcher / Splitter with Remote Control $39.94 Brand new high quality HDMI switch. LED lights indicator on front panel. Support resolution up to 1080p. HDMI pass-through, HDCP pass-through. Connectivity: 5 Female HDMI input ports and 1 Female HDMI output port. Extend the range of HDMI compliant device by equalizing and re-clocking the HDMI signal. Include remote control and AC power adapter.

5-Port Audio Video HDMI Switch / Switcher / Splitter with Remote Control $21.74 This 5×1 HDMI switch allows multiple HDMI device such as PS3, Xbox, Bluray DVD, HD DVD, Cable box and Satellite box to share the same HD Plasma TV. ~Brand new high quality HDMI switch. ~LED lights indicator on front panel. ~Support resolution up to 1080p. ~HDMI pass-through, HDCP pass-through. ~Connectivity: 5 Female HDMI input ports and 1 Female HDMI output port. ~Extend the range of HDMI compliant device by equalizing and re-clocking the HDMI signal. ~Include remote control and infrared receiver. ~No ac power is needed. This device is powered by HDMI cable. ~sku:cabhdm915

8×1 (8:1) Composite (BNC) Video Switcher with Remote $166 Shinybow SB-5440BNC is a high performance BNC Video Switch with remote control. Simply pressing a button on the remote or on the front panel of the switch you can select either one of the 8 desired source to be routed to a connected Security System, TV, plasma screen, video projector etc. TECHNICAL SPECIFICATIONS: **Frequency bandwidth: 80MHz. **Inputs: 8 BNC female ports. **Output: 1 BNC female port. **Power Supply: 12V DC. **Dimensions: 6.8 W x 4 L x 1.02 H. **Weight: 1.5 LB. PACKAGE INCLUDES: Shinybow SB-5440BNC (8×1 Composite/BNC Switcher), IR Remote control, 12V Power Supply, User’s Manual.

Adaptor, DVI Male to VGA HD15 Female $3.99 Digital Visual Interface (DVI) is the standard interface for a high-performance connection between PCs and flat panel displays, digital CRT displays, projectors, and HDTV. DVI Adapters deliver the high-performance and high-bandwidth interface needed for v

Alpinestars Stella Tyla Womens Pant Black 6 USA/42 Euro/S $349.95 Female specific, boot cut design, sport bike riding pant in monochromatic colorways with retro styling. Ergonomically placed stretch panels provide a shaped, comfortable, fit for the female physique and the waist zip allows connection with the Stella Tyla Jacket. Women specific fit, boot cut leg, with a jeans inspired look 1.2-1.4mm full-grain leather for excellent abrasion resistance Removable CE certified Stella Smart, soft, protectors Ergonomically placed stretch Kevlar? panels for optimal flexibility in the seat and knees Internally reinforced seat area Internal lining with stretch panel inserts to work with outer stretch zones

Alpinestars Stella Tyla Womens Pant Cream 2 USA/38 Euro/XXS $349.95 Female specific, boot cut design, sport bike riding pant in monochromatic colorways with retro styling. Ergonomically placed stretch panels provide a shaped, comfortable, fit for the female physique and the waist zip allows connection with the Stella Tyla Jacket. Women specific fit, boot cut leg, with a jeans inspired look 1.2-1.4mm full-grain leather for excellent abrasion resistance Removable CE certified Stella Smart, soft, protectors Ergonomically placed stretch Kevlar? panels for optimal flexibility in the seat and knees Internally reinforced seat area Internal lining with stretch panel inserts to work with outer stretch zones

Alpinestars Stella Tyla Womens Pant Cream 6 USA/42 Euro/S $349.95 Female specific, boot cut design, sport bike riding pant in monochromatic colorways with retro styling. Ergonomically placed stretch panels provide a shaped, comfortable, fit for the female physique and the waist zip allows connection with the Stella Tyla Jacket. Women specific fit, boot cut leg, with a jeans inspired look 1.2-1.4mm full-grain leather for excellent abrasion resistance Removable CE certified Stella Smart, soft, protectors Ergonomically placed stretch Kevlar? panels for optimal flexibility in the seat and knees Internally reinforced seat area Internal lining with stretch panel inserts to work with outer stretch zones

Alpinestars Women’s Stella Tyla Leather Motorcycle Pants Cream Size: 46 $349.95 Female specific, boot cut design, sport bike riding pant in monochromatic colorways with retro styling. Ergonomically placed stretch panels provide a shaped, comfortable, fit for the female physique and the waist zip allows connection with the Stella Tyla Jacket. Women specific fit, boot cut leg, with a jeans inspired look 1.2-1.4mm full-grain leather for excellent abrasion resistance Removable CE certified Stella Smart, soft, protectors Ergonomically placed stretch Kevlar panels for optimal flexibility in the seat and knees Internally reinforced seat area Internal lining with stretch panel inserts to work with outer stretch zones

Answer Youth Girls’ WMX Chest Protector $79.95 The Answer Youth Girls’ WMX Chest Protector was made this chest protector with female motorcycle riders in mind. This chest protector will accommodate neck braces. Pivoting rear lower panel allows def

Answer Youth Girls’ WMX Chest Protector $89.95 The Answer Youth Girls’ WMX Chest Protector was made this chest protector with female motorcycle riders in mind. This chest protector will accommodate neck braces. Pivoting rear lower panel allows def

Authentic Steel Boned Waist Reducing Buckled Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled Candy Stripe Brocade Corset 26 Blk $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled candy Classic Brocade Corset With Faux Leather Front $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled candy Classic Brocade Corset With Faux Leather Front $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled candy Classic Brocade Corset With Faux Leather Front $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled candy Classic Brocade Corset With Faux Leather Front $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled candy Stripe Brocade Corset With Faux Leather Front $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled candy Stripe Brocade Corset With Faux Leather Front $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Buckled candy Stripe Brocade Corset With Faux Leather Front $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Burlesque Brocade Corset $48.3 Long lined pattern is perfect for long and medium torso female Front length is 15.5 inches (39.3 cm) Bust to bottom length is 18 inches (45.7 cm) Side length is 13.5 inches (34.3 cm) Back Length is 17 inches (43.15 cm) / Bone: 2 spiral steel bones over the bust of the corset. Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 14 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 16 X 2 = 32 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Burlesque Brocade Corset Black Size 28 $48.3 Long lined pattern is perfect for long and medium torso female Front length is 15.5 inches (39.3 cm) Bust to bottom length is 18 inches (45.7 cm) Side length is 13.5 inches (34.3 cm) Back Length is 17 inches (43.15 cm) / Bone: 2 spiral steel bones over the bust of the corset. Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 14 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 16 X 2 = 32 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Burlesque Brocade Corset Black Size 30 $48.3 Long lined pattern is perfect for long and medium torso female Front length is 15.5 inches (39.3 cm) Bust to bottom length is 18 inches (45.7 cm) Side length is 13.5 inches (34.3 cm) Back Length is 17 inches (43.15 cm) / Bone: 2 spiral steel bones over the bust of the corset. Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 14 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 16 X 2 = 32 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Burlesque Satin Corset $48.3 Sweet heart Overbust pattern perfect for long, medium & short torso female Front length is 14.5 inches (36.8 cm) Bust to bottom length is 15 inches (38.10 cm) Side length is 12.5 inches (31.75 cm) Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. Trims: Black Lace Trim / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Burlesque Satin Corset $48.3 Sweet heart Overbust pattern perfect for long, medium & short torso female Front length is 14.5 inches (36.8 cm) Bust to bottom length is 15 inches (38.10 cm) Side length is 12.5 inches (31.75 cm) Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. Trims: Black Lace Trim / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Burlesque Satin Corset $48.3 Sweet heart Overbust pattern perfect for long, medium & short torso female Front length is 14.5 inches (36.8 cm) Bust to bottom length is 15 inches (38.10 cm) Side length is 12.5 inches (31.75 cm) Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. Trims: Black Lace Trim / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Burlesque Satin Corset 26 (Waist 30-31 in) $48.3 Sweet heart Overbust pattern perfect for long, medium & short torso female Front length is 14.5 inches (36.8 cm) Bust to bottom length is 15 inches (38.10 cm) Side length is 12.5 inches (31.75 cm) Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. Trims: Black Lace Trim / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Burlesque Satin Corset Blue Size 28 $48.3 Sweet heart Overbust pattern perfect for long, medium & short torso female Front length is 14.5 inches (36.8 cm) Bust to bottom length is 15 inches (38.10 cm) Side length is 12.5 inches (31.75 cm) Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. Trims: Black Lace Trim / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Burlesque Satin Corset Red Size 22 $48.3 Sweet heart Overbust pattern perfect for long, medium & short torso female Front length is 14.5 inches (36.8 cm) Bust to bottom length is 15 inches (38.10 cm) Side length is 12.5 inches (31.75 cm) Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. Trims: Black Lace Trim / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset 26 Black/Green $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Brocade Corset Black Size 26 $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Classic Brocade Corset Waist 32-33 in $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Damask Floral Tissue Corset 28 Wh/Blk $48.3 Candy underbust pattern perfect for long, medium & short torso female, Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long. Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 12X 2 = 24 total. Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Tissue. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Lily Floral Tissue Corset 26 Wh/Blk $48.3 Candy underbust pattern perfect for long, medium & short torso female, Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long. Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 12X 2 = 24 total. Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Tissue. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy PVC Corset Black Size 26 $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: 100% PVC vinyl. Fabric Layer-2: lining 100% cotton which is fused for strength. / aist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Satin Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Satin Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Satin Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Satin Corset 24 (Waist 28-29 inch) $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Satin Corset Blue Size 24 $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 8X 2 = 16 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly satin which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 12X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 12X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 12X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Stripe Brocade Corset $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Stripe Brocade Corset Waist 26-27 in $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Stripe Brocade Corset Waist 36-37 in $48.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 12X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell Fabric 100% Poly Brocade which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Velvet Corset 24 Blue $55.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 12X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: 100% Poly Velvet which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Velvet Corset 26 (Waist 30-31 inch) $55.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 12X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: 100% Poly Velvet which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Candy Velvet Corset 26 Blue $55.3 Candy underbust pattern perfect for long, medium & short torso female Front length is 11 inches (28 cm) Underbust to bottom length is 9.7 inches (24.6 cm) Side length is 9.5 inches (24 cm) Back Length is 11.5 inches (29.20 cm) / Bone: 14 flat steel bones are distributed all around the corset. Front opening is metal busk which is 9.5 inches long Lacing: It has 8 meter long lace which is used to tight lacing the corset. / Grommets in the back 12X 2 = 24 total Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: 100% Poly Velvet which is fused for strength. Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold. Suspender loops: 6 suspender loops at the bottom. Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Classic Brocade Corset $48.3 Sweet heart Overbust pattern perfect for long ,medium & short torso female Front length is 14.5 inches (36.8 cm), Bust to bottom length is 15 inches (38.10 cm), Side length is 12.5 inches (31.75 cm), Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total, Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell fabric 100% Poly Brocade which is fused for strength, Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold, Suspender loops: 6 suspender loops at the bottom, Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Classic Brocade Corset $48.3 Sweet heart Overbust pattern perfect for long ,medium & short torso female Front length is 14.5 inches (36.8 cm), Bust to bottom length is 15 inches (38.10 cm), Side length is 12.5 inches (31.75 cm), Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total, Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell fabric 100% Poly Brocade which is fused for strength, Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold, Suspender loops: 6 suspender loops at the bottom, Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Classic Brocade Corset $48.3 Sweet heart Overbust pattern perfect for long ,medium & short torso female Front length is 14.5 inches (36.8 cm), Bust to bottom length is 15 inches (38.10 cm), Side length is 12.5 inches (31.75 cm), Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total, Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell fabric 100% Poly Brocade which is fused for strength, Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold, Suspender loops: 6 suspender loops at the bottom, Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Classic Brocade Corset $48.3 Sweet heart Overbust pattern perfect for long ,medium & short torso female Front length is 14.5 inches (36.8 cm), Bust to bottom length is 15 inches (38.10 cm), Side length is 12.5 inches (31.75 cm), Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total, Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell fabric 100% Poly Brocade which is fused for strength, Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold, Suspender loops: 6 suspender loops at the bottom, Bone casing: All bones are placed under cotton twill bone casing.

Authentic Steel Boned Waist Reducing Classic Brocade Corset $48.3 Sweet heart Overbust pattern perfect for long ,medium & short torso female Front length is 14.5 inches (36.8 cm), Bust to bottom length is 15 inches (38.10 cm), Side length is 12.5 inches (31.75 cm), Back Length is 13 inches (33 cm) / Bone: 2 spiral steel bones over the bust of the corset, Bone: 12 flat steel bones are distributed all around the corset. Front opening is metal busk which is 12.5 inches long / Lacing: It has 8 meter long lace which is used to tight lacing the corset. Grommets in the back 12 X 2 = 24 total, Panels: It is made up of 12 panels, 6 on each half. Modesty panel 6 inches wide. This will hide skin at the back. / Fabric Layer-1: Shell fabric 100% Poly Brocade which is fused for strength, Fabric Layer-2: lining 100% cotton which is fused for strength. / Waist tape: 1 inch wide satin waist tape is used for perfect grip and hold, Suspender loops: 6 suspender loops at the bottom, Bone casing: All bones are placed under cotton twill bone casing.