Posted by admin | Posted in Cords and Cables | Posted on 17-07-2010
Tags: buy, cable, cat5e, network, run
More Calculus Problems…?
1) Find the absolute maximum and absolute minimum values of the function, if they exist, on the indicated interval.
f(x) = x3 – 3x – 2; [-5, 1]
2) Solve the problem.
The cost of a computer system increases with increased processor speeds. The cost C of a system as a function of processor speed is estimated as C=13s^2 – 9s + 1700 where S is the processor speed in MHz. Find the processor speed for which cost is at a minimum.
3) Solve the problem.
A piece of molding 177 cm long is to be cut to form a rectangular picture frame. What dimensions will enclose the largest area? Round to the nearest hundredth, if necessary.
Ouch, calculus.. I’m in my second term now but I do not remember max/min.. how sad! Math is hard to do over the internet; I suggest going in early for help from your professor.
How to make a Cat6 Network Cable
|
|
Linear GT-31 3-Channel Genie Compatible Key Ring Transmitter $16.84 The Linear GT-31 3-Channel Genie Compatible Key Ring Transmitter is for use with Genie Intellicode, Overhead Code Dodger, and Linear Model AM-RGR access control receivers. The Linear GT-31 3-Channel Genie Compatible Key Ring Transmitter Installation Manual Accessories and Compatible Models Large Image The Model GT-31 3-Channel Genie Compatible Key Ring Transmitter is a three-button miniature trans… |
|
|
Multicode 3083 – Mini 2 Button Garage Door Opener $14.65 Multi Code 3083 Multi Code dual button mini remote, 300 mhz, 10 switch, keychain style remote Features Test/operate LED |
|
|
Linear Multi-code 300MHz 1-Channel Key Ring Transmitter $12.30 The Model 307010 1-Channel Key Ring Transmitter is a miniature style transmitter designed for automatic door and gate operator applications. This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 12-volt battery. A molded-in hole in the case is for attaching the transmitter to a k… |
|
|
N002-002-BL 2ft Cat5e 350MHz Molded Cable RJ45 M/M Blue, 2` $3.17 Use this high-quality cable for all of your CAT5e cabling needs. Conductivity ensures clean, clear transmissions for worry-free connections. Molded connectors with integral strain relief provide extra security and durability. Cable Type: Cat5e Patch Molded; Connector/Port/Interface: Two RJ 45 Male; For Device Type: Mac; Network; PC; Connects Devices (From/To): Computers in Local Area Network. … |
|
|
Cables To Go 27143 Cat6 550 MHz Snagless Patch Cable, Blue (10 Feet) $0.01 With Cables To Go’s Cat6 550Mhz Snagless Patch Cables you can stay ahead of the game with the use of this high-speed cabling to distribute data voice and video. These cables will deliver stable performance to 550 MHz. Each es UL verified and meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1 draft 9 standards. These cables will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically r… |
|
|
Cables To Go – 27166 – 50ft CAT6 550Mhz Snagless Patch Cable White $6.89 With Cables To Go’s Cat6 550Mhz Snagless Patch Cables you can stay ahead of the game with the use of this high-speed cabling to distribute data voice and video. These cables will deliver stable performance to 550 MHz. Each es UL verified and meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1 draft 9 standards. These cables will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically r… |
|
|
10FT / 3m HDMI TO DVI M/M CABLE $1.33 You won’t regret your purchase!!!… |
|
|
Eccessories Crystal Case -Aspire 1- Clear Bags/Carry Cases – 1103-CRY100CL $24.99 Crystal Case for Acer Aspire One 8.9″ – Clear in color and Custom molded and perfectly Stylish durable and Easy to remove.Includes 5 designer vellum inserts… |
|
|
Beltronics STi Driver Radar Detector $329.11 Product Description: Exclusive TotalShield technology makes this top of the line detector invisible to radar detector detectors. And if the best in class detection wasn’t enough, the STi Driver package comes complete with a comprehensive owner?s manual with quick reference card, quick-release windshield mount with suction cups, our unique coiled SmartPlug lighter adapter with convenient mute butto… |
|
|
Cables Unlimited STP-7000-50K Cat7 Shielded 600Mhz Patch Cables (50 feet, Black) $18.95 Cables Unlimited Cat.7 Patch Cable STP-7000-50K Network Cables… |
|
|
Maxrad MEXC450BN 450470 Mhz 6 in. Molded Duck $33.35 450470 MHz 1/4 Wave 6 Molded Portable Antenna BNC Conn. Connector Type: BNC Male(BN). Fits Radio Models Any Radio Model equipped with BNC Female. |
|
|
3ft. Molded CAT5e 350 MHz UTP Patch Cable – Blue $2.99 3ft. Molded CAT5e 350 MHz UTP Patch Cable from StarTech.com keep your workspace’s complex wiring system under control by using color to code them and keep things organized. |
|
|
Maxrad MEXC450MX 450470 Mhz 6 in. Molded Duck $33.35 Frequency Range 450470 MHz Length 6 ConstructionMolded Antenna Type 1/4 wave HelicalCompatibility Motorola GP300 GP350 HT10 HT50 HT600 MT100 MX MX300 P10 P50 P100 P200 P210 SP10 SP50 Expo Radius Saber (with washer CAP74160): Kenwood TK230 TK240 TK250 TK270 TK290 TK330 TK340 TK350 TK360 TK370: Maxon SP2000 2550 2850: Midland: Wilson MH200: GE Monogram: Vertex VX500: Ritron/Jobcom JMX. |
|
|
Cables To Go / 14ft Cat6 550 MHz Molded Shielded Patch Cable – Red / 31204 $22.28 Cables To Go – 14ft Cat6 550 MHz Molded Shielded Patch Cable – Red – 31204 |
|
|
Cables To Go / 3ft Cat6 550 MHz Molded Shielded Patch Cable – Green / 31221 $17.04 Cables To Go – 3ft Cat6 550 MHz Molded Shielded Patch Cable – Green – 31221 |
|
|
Cables To Go / 10ft Cat6 550 MHz Molded Shielded Patch Cable – Gray / 31217 $20.51 Cables To Go – 10ft Cat6 550 MHz Molded Shielded Patch Cable – Gray – 31217 |
|
|
Cables To Go / 3ft Cat6 550 MHz Molded Shielded Patch Cable – Red / 31200 $17.04 Cables To Go – 3ft Cat6 550 MHz Molded Shielded Patch Cable – Red – 31200 |
|
|
Cables To Go / 5ft Cat6 550 MHz Molded Shielded Patch Cable – Red / 31201 $18.04 Cables To Go – 5ft Cat6 550 MHz Molded Shielded Patch Cable – Red – 31201 |
|
|
Cables To Go / 7ft Cat6 550 MHz Molded Shielded Patch Cable – Red / 31202 $18.57 Cables To Go – 7ft Cat6 550 MHz Molded Shielded Patch Cable – Red – 31202 |
|
|
Cables To Go / 14ft Cat6 550 MHz Molded Shielded Patch Cable – Gray / 31218 $22.28 Cables To Go – 14ft Cat6 550 MHz Molded Shielded Patch Cable – Gray – 31218 |
|
|
Cables To Go / 25ft Cat6 550 MHz Molded Shielded Patch Cable – Gray / 31219 $28.3 Cables To Go – 25ft Cat6 550 MHz Molded Shielded Patch Cable – Gray – 31219 |
|
|
Cables To Go / 7ft Cat6 550 MHz Molded Shielded Patch Cable – Green / 31223 $18.57 Cables To Go – 7ft Cat6 550 MHz Molded Shielded Patch Cable – Green – 31223 |
|
|
Cables To Go / 14ft Cat6 550 MHz Molded Shielded Patch Cable – Green / 31225 $22.28 Cables To Go – 14ft Cat6 550 MHz Molded Shielded Patch Cable – Green – 31225 |
|
|
Cables To Go / 25ft Cat6 550 MHz Molded Shielded Patch Cable – Blue / 31212 $28.3 Cables To Go – 25ft Cat6 550 MHz Molded Shielded Patch Cable – Blue – 31212 |
|
|
Cables To Go / 7ft Cat6 550 MHz Molded Shielded Patch Cable – Gray / 31216 $18.57 Cables To Go – 7ft Cat6 550 MHz Molded Shielded Patch Cable – Gray – 31216 |
|
|
Cables To Go / 35ft Cat6 550 MHz Molded Shielded Patch Cable – Red / 31206 $33.17 Cables To Go – 35ft Cat6 550 MHz Molded Shielded Patch Cable – Red – 31206 |
|
|
Cables To Go / 3ft Cat6 550 MHz Molded Shielded Patch Cable – Blue / 31207 $17.04 Cables To Go – 3ft Cat6 550 MHz Molded Shielded Patch Cable – Blue – 31207 |
|
|
Cables To Go / 35ft Cat6 550 MHz Molded Shielded Patch Cable – Green / 31227 $33.17 Cables To Go – 35ft Cat6 550 MHz Molded Shielded Patch Cable – Green – 31227 |
|
|
Cat6 550 MHz Molded Shielded Patch Cable – patch cable – 25 ft $19.99 C2G Cat6 550 MHz Molded Shielded Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 25 ft – STP – CAT 6 – molded stranded snagless – blue |
|
|
Cat6 550 MHz Molded Shielded Patch Cable – patch cable – 35 ft $22.99 C2G Cat6 550 MHz Molded Shielded Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 35 ft – STP – CAT 6 – molded stranded snagless – blue |
|
|
Cat6 550 MHz Molded Shielded Patch Cable – patch cable – 7 ft $9.99 C2G Cat6 550 MHz Molded Shielded Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 7 ft – STP – CAT 6 – molded stranded snagless – blue |
|
|
Cat6 550 MHz Molded Shielded Patch Cable – patch cable – 5 ft $9.99 C2G Cat6 550 MHz Molded Shielded Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 5 ft – STP – CAT 6 – molded stranded snagless – blue |
|
|
Cat6 550 MHz Molded Shielded Patch Cable – patch cable – 14 ft $13.99 C2G Cat6 550 MHz Molded Shielded Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 14 ft – STP – CAT 6 – molded stranded snagless – gray |
|
|
Cat6 550 MHz Molded Shielded Patch Cable – patch cable – 3 ft $8.99 C2G Cat6 550 MHz Molded Shielded Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 3 ft – STP – CAT 6 – molded stranded snagless – green |
|
|
Cat6 550 MHz Molded Shielded Patch Cable – patch cable – 10 ft $11.99 C2G Cat6 550 MHz Molded Shielded Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 10 ft – STP – CAT 6 – molded stranded snagless – green |
|
|
31204 – 14Ft Cat6 550 Mhz Molded Shielded Patch Cable – Red $11.43 protect Your High Speed Network From Noise And Electromagnetic Interference When You Connect With Our Shielded Cat6 Patch Cable. For Voice/data/video Distribution, This Cable Will Handle Bandwidth-intensive Applications up to 550 Mhz. Meets All Cat6 Tia/eia-568-b-2.1, Draft 9 Standards, And Drastically Reduces Both Impedance And Structural Return Loss (srl) When Compared to Standard 100 Mhz Wire. Each of The Individual Pairs is Bonded Together to Help Maintain The Twist-spacing Throughout The Line Right up to The Termination Point. Constructed From High-quality Cable And a Shortened Body Plug, This Design Minimizes Near-end Crosstalk (next) Levels. Available in a Variety of Colors to Easily Color-code Your Network Installation. [1906811] UPC: 757120312048 UNSPC: 26121609 9.2L x 6.4W x 1H 0.35 LB 1 Cubes |
|
|
Gray Molded Category 5e UTP Patch Cable (50ft.) $9.99 UTP Patch Cable (350 MHz) |
|
|
3ft. Molded CAT5e 350 MHz UTP Patch Cable – Gray $2.99 Use StarTech.com patch cable to keep your workspace’s complex wiring system under control by using color to code them and keep things organized. |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 75 ft $23.99 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 75 ft – CAT 6 – molded snagless – white |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 10 ft $7 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 10 ft – CAT 6 – molded snagless – purple |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 50 ft $17.99 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 50 ft – CAT 6 – molded snagless – purple |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 5 ft $3.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 5 ft – CAT 5e – molded snagless – white |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 10 ft $4.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 10 ft – CAT 5e – molded stranded – black |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 50 ft $14.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 50 ft – CAT 5e – molded snagless – yellow |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 3 ft $2.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 3 ft – CAT 5e – molded – red |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 6.6 ft $3.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 6.6 ft – CAT 5e – molded – red |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 7 ft $3.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 7 ft – CAT 5e – molded – black |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 25 ft $9.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 25 ft – CAT 5e – molded – green |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 14 ft $5.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 14 ft – UTP – CAT 5e – molded – black |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 1 ft $2.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 1 ft – CAT 5e – molded snagless – red |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 14 ft $7.99 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 14 ft – CAT 6 – molded snagless – gray |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 20 ft $12.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 20 ft – UTP – CAT 5e – molded stranded snagless – blue |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 200 ft $56.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 200 ft – CAT 5e – molded stranded snagless booted – blue |
|
|
Cat6 550 MHz Snagless Crossover Cable – crossover cable – 3 ft $5.99 C2G Cat6 550 MHz Snagless Crossover Cable – Crossover cable – RJ-45 (M) – RJ-45 (M) – 3 ft – CAT 6 – molded stranded snagless booted – yellow |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 75 ft $19.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 75 ft – CAT 5e – molded stranded snagless – blue |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 100 ft $28.99 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 100 ft – CAT 6 – molded stranded snagless booted – red |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 1 ft $3.99 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 1 ft – CAT 6 – molded stranded snagless booted – black |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 7 ft $5.99 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 7 ft – CAT 6 – molded stranded snagless booted – purple |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 35 ft $12.99 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 35 ft – CAT 6 – molded stranded snagless – purple |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 5 ft $4.99 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 5 ft – CAT 6 – molded snagless booted – white |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 3 ft $4.99 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 3 ft – CAT 6 – molded snagless booted – black |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 25 ft $9.99 C2G Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 25 ft – CAT 6 – molded snagless booted – black |
|
|
Cat6 550 MHz Snagless Crossover Cable – crossover cable – 5 ft $6.99 C2G Cat6 550 MHz Snagless Crossover Cable – Crossover cable – RJ-45 (M) – RJ-45 (M) – 5 ft – CAT 6 – molded stranded snagless – red |
|
|
Cat6 550 MHz Snagless Crossover Cable – crossover cable – 7 ft $6.99 C2G Cat6 550 MHz Snagless Crossover Cable – Crossover cable – RJ-45 (M) – RJ-45 (M) – 7 ft – CAT 6 – molded stranded snagless booted – orange |
|
|
Cat6 550 MHz Snagless Crossover Cable – crossover cable – 14 ft $9.99 C2G Cat6 550 MHz Snagless Crossover Cable – Crossover cable – RJ-45 (M) – RJ-45 (M) – 14 ft – CAT 6 – molded stranded snagless booted – gray |
|
|
Cat6 550 MHz Snagless Crossover Cable – crossover cable – 25 ft $11.99 C2G Cat6 550 MHz Snagless Crossover Cable – Crossover cable – RJ-45 (M) – RJ-45 (M) – 25 ft – CAT 6 – molded stranded snagless booted – gray |
|
|
Cat6 550 MHz Snagless Crossover Cable – crossover cable – 10 ft $8.99 C2G Cat6 550 MHz Snagless Crossover Cable – Crossover cable – RJ-45 (M) – RJ-45 (M) – 10 ft – CAT 6 – molded stranded snagless booted – red |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 20 ft $10 Axiom Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 20 ft – UTP – CAT 6 – molded stranded snagless booted – red |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 15 ft $5.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 15 ft – UTP – CAT 5e – molded stranded snagless – black |
|
|
Cat5E 350 MHz Snagless Patch Cable – patch cable – 100 ft $22.99 C2G Cat5E 350 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 100 ft – CAT 5e – molded stranded snagless – yellow |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 2 ft $4 Axiom Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 2 ft – UTP – CAT 6 – molded stranded snagless booted – red |
|
|
Cat6 550 MHz Snagless Patch Cable – patch cable – 300 ft $4 Axiom Cat6 550 MHz Snagless Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 300 ft – UTP – CAT 6 – molded stranded snagless booted – orange |
|
|
10FT HDMI To DVI Digital Cable HD TV PC LCD $4.71 Eliminate unnecessary signal conversions. 24 bit/pixel, 165 MHz max clock frequency. 5 Gbps bandwidth, 55% spared for future expansion.Connectors: HDMI Male to DVI Male. Color: Black. Cord Length: 9.8 ft / 3 m. Accessory ONLY.Suggested Applications: standard, enhanced, or high-definition video on a single cable.HDMI DTVs will display video received from existing DVI-equipped products, and DVI-equipped TVs will display video from HDMI sources. Cable built with matching impedance, PVC jacket, molded ends and inner hood soldered 360 degrees to the connector to achieve a complete end to end shielding.High-Definition Multimedia Interface (HDMI) uses a much smaller, user-friendly connector along with the DVI connector. HDMI is fully backward-compatible with DVI hot plug for DTVs. |
|
|
15 FT / 4.6 M DVI To HDMI Male Cable 5Gbps M/M For PC DVD Xbox PS3 HD TV, Black $3.29 5 Gbps bandwidth, 55% spared for future expansion. Connectors: HDMI Male to DVI Male.Eliminate unnecessary signal conversions. 24 bit/pixel, 165 MHz max clock frequency.HDMI DTVs will display video received from existing DVI-equipped products, and DVI-equipped TVs will display video from HDMI sources. Cable built with matching impedance, PVC jacket, molded ends and inner hood soldered 360 degrees to the connector to achieve a complete end to end shielding.Color: Black. Cord Length: 14.75 ft / 4.5 m. Accessory ONLY. Suggested Applications: standard, enhanced, or high-definition video on a single cable.High-Definition Multimedia Interface (HDMI) uses a much smaller, user-friendly connector along with the DVI connector. HDMI is fully backward-compatible with DVI hot plug for DTVs. |
|
|
15 FT / 4.6 M HDMI MALE to DVI CABLE 5Gbps M/M FOR HDTV LCD PLASMA PS3, Black $3.29 5 Gbps bandwidth, 55% spared for future expansion. Connectors: HDMI Male to DVI Male.High-Definition Multimedia Interface (HDMI) uses a much smaller, user-friendly connector along with the DVI connector. HDMI is fully backward-compatible with DVI hot plug for DTVs.HDMI DTVs will display video received from existing DVI-equipped products, and DVI-equipped TVs will display video from HDMI sources. Cable built with matching impedance, PVC jacket, molded ends and inner hood soldered 360 degrees to the connector to achieve a complete end to end shielding.Color: Black. Cord Length: 14.75 ft / 4.5 m. Accessory ONLY. Suggested Applications: standard, enhanced, or high-definition video on a single cable.Eliminate unnecessary signal conversions. 24 bit/pixel, 165 MHz max clock frequency. |
|
|
15 FT / 4.6 M HDMI To DVI Cable Digital PC LCD Mac HD Plasma, Black $3.29 High-Definition Multimedia Interface (HDMI) uses a much smaller, user-friendly connector along with the DVI connector. HDMI is fully backward-compatible with DVI hot plug for DTVs.5 Gbps bandwidth, 55% spared for future expansion. Connectors: HDMI Male to DVI Male.Eliminate unnecessary signal conversions. 24 bit/pixel, 165 MHz max clock frequency.HDMI DTVs will display video received from existing DVI-equipped products, and DVI-equipped TVs will display video from HDMI sources. Cable built with matching impedance, PVC jacket, molded ends and inner hood soldered 360 degrees to the connector to achieve a complete end to end shielding.Color: Black. Cord Length: 15 ft / 4.6 m. Accessory ONLY. Suggested Applications: standard, enhanced, or high-definition video on a single cable. NOTE: Even though HDMI cables support Hot Plug Detection, improper usage might result in resetting / restarting both devices, or even may cause damage to the devices. Therefore, we do not suggest Hot Plug action for any HDMI cables. Please make sure both input and output devices are off when plugging or unplugging HDMI cables. Apple iPod?, iPhone?, or iPad? are registered trademarks of Apple, Inc. Products are Apple compatible and not endorsed by Apple, Inc. |
|
|
15 FT/ 4.6 M HDMI TO DVI CABLE 5Gbps M/M LCD PC MONITOR PS3 DVD BLURAY, Black $3.29 HDMI DTVs will display video received from existing DVI-equipped products, and DVI-equipped TVs will display video from HDMI sources. Cable built with matching impedance, PVC jacket, molded ends and inner hood soldered 360 degrees to the connector to achieve a complete end to end shielding.High-Definition Multimedia Interface (HDMI) uses a much smaller, user-friendly connector along with the DVI connector. HDMI is fully backward-compatible with DVI hot plug for DTVs.Eliminate unnecessary signal conversions. 24 bit/pixel, 165 MHz max clock frequency. 5 Gbps bandwidth, 55% spared for future expansion.Connectors: HDMI Male to DVI Male. Color: Black. Cord Length: 14.75 ft / 4.5 m. Accessory ONLY.Suggested Applications: standard, enhanced, or high-definition video on a single cable. |
|
|
200 FT RJ45 CAT 5E MOLDED NETWORK CABLE – GRAY $52.49 BRAND NEW Custom 200 FT CAT5E ETHERNET CABLE. CAT 5e Enhanced Network Cable (350 MHZ) Solid Wire Includes End Connectors and Snagless Boots, 200FT standard. CONNECT THIS FROM YOUR PCs TO ANY NETWORKING DEVICES SUCH AS DSL and CABLE, BROADBAND MODEMS, ROUTERS, HUBS, SWITCHES. YOU CAN ALSO CONNECT YOUR XBOX / 360 / GAME SYSTEM TO THE INTERNET WITH THIS CABLE [SIMPLY CONNECT THIS]: * FROM YOUR XBOX / XBOX 360 to your LINKSYS or other brand Ethernet Router such as Netgear, D-Link and more and even XBOX / XBOX 360 to Cable/DSL Modem. * FROM YOUR LINKSYS or other brand Ethernet Router to DSL/CABLE MODEM * FROM YOUR WIRELESS Router [if your Wireless router has ports on the back] to your PC. |
|
|
3FT CAT 6 CROSSOVER ORANGE $3.59 Cables to Go Cat6 550 MHz Snagless Crossover Cable – Crossover cable – RJ-45 (M) – RJ-45 (M) – 3 ft – ( CAT 6 ) – molded, stranded, snagless, booted – orange |
|
|
3FT CAT6 RED SHIELDED PATCH $13.19 Cables to Go Cat6 550 MHz Molded Shielded Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 3 ft – STP – ( CAT 6 ) – molded, stranded, snagless – red |
|
|
5FT CAT6 RED MOLDED SHIELDED $8.39 Cables to Go Cat6 550 MHz Molded Shielded Patch Cable – Patch cable – RJ-45 (M) – RJ-45 (M) – 5 ft – STP – ( CAT 6 ) – molded, stranded, snagless – red |
|
|
6ft Gold 24+1 DVI-D Male to Male HDMI Cable for HDTV HD $6.62 NOTE: Even though HDMI cables support Hot Plug Detection, improper usage might result in resetting / restarting both devices, or even may cause damage to the devices. Therefore, we do not suggest Hot Plug action for any HDMI cables. Please make sure both input and output devices are off when plugging or unplugging HDMI cables. High-Definition Multimedia Interface (HDMI) uses a much smaller, user-friendly connector along with the DVI connector. HDMI is fully backward-compatible with DVI hot plug for DTVsHDMI DTVs will display video received from existing DVI-equipped products, and DVI-equipped TVs will display video from HDMI sourcesCable built with matching impedance, PVC jacket, molded ends and inner hood soldered 360 degrees to the connector to achieve a complete end to end shieldingEliminate unnecessary signal conversions. 24 bit/pixel, 165 MHz max clock frequency. 5 Gbps bandwidth, 55% spared for future expansion. Connectors: HDMI Male to DVI Male. Color: Black. Cord Length: 6 FT / 1.8 M. Accessory ONLY. Suggested Applications: standard, enhanced, or high-definition video on a single cable. |
|
|
Atlona Home AT31015-3 Cat.5e Patch Cable – Category 5e for Network Device – 9.84 ft – 1 x RJ-45 Male Network – 1 x RJ-45 Male Network – Gold-plated Contacts $15 The Atlona High-quality Cat5e cable is a perfect addition to any network, video or audio applications. The cable is designed to support full 350 MHz and comply with TIA/EIA standards. The cable is wired with 568B termination, which would allow longer distance for data, video or audio signal. Snagless PVC jacket, molded-strain relief provides extra security, and 24K gold-plated connectors ensure clean, clear transmissions. |
|
|
Belkin Cat. 5e Patch Cable – RJ-45 Male – RJ-45 Male – 7ft – Black $7.49 RJ45 CAT5e Snagless Patch Cable offers high-bandwidth capacity to accommodate streaming video and other memory-intensive applications. Cable provides standard CAT5e network connection. Perfect in conjunction with 10 and 100 Base-T networks. Premium snagless-type moldings protect the connection. Supports 100 Mbps applications. Features 100 MHz rating. Ideal for basic home networking. |
|
|
Belkin Cat.6 Patch Cable – RJ-45 Male Network – RJ-45 Male Network – 3ft – Gray $14.99 RJ45 High Performance Category 6 Snagless Patch Cable offers high bandwidth to accommodate streaming video and other data-intensive applications. Ideal for 100 Base-T and gigabit networks. Performance-tested to 100 MHz frequency. Cable provides the highest-performance network connection and supports 100 Mbps. Patch cable increases the quality of high-speed Internet applications, multiplayer gaming and streaming audio video. Ideal for demanding use and small/medium-size business. |
|
|
Belkin Cat.6 UTP Patch Cable – RJ-45 Male – RJ-45 Male – 50ft – Gray $49.99 RJ45 High Performance Category 6 Snagless Patch Cable offers high bandwidth to accommodate streaming video and other data-intensive applications. Ideal for 100 Base-T and gigabit networks. Performance-tested to 100 MHz frequency. Cable provides the highest-performance network connection and supports 100 Mbps. Patch cable increases the quality of high-speed Internet applications, multiplayer gaming and streaming audio video. Ideal for demanding use and small/medium-size business. |
|
|
CABLES TO GO 14ft Cat5E 350 MHz Snagless Patch Cable – Black 15208 $6.99 For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your Network installation. -Features:-Conductor: 4-pair (UTP) 24 AWG stranded copper-Connector: 50 micron Gold-plated RJ45-Jacket: PVC-Wired: TSB 568B (AT&T 258A)-Certification: TIA/EIA -Warranty: Lifetime-Color: Black-Length: 7ft-Mfr: Cables To Go- Weight: 0.170lbs.-Cables To Go 15208 |
|
|
CABLES TO GO 14ft Cat6 550 MHz Snagless Patch Cable – Black 27154 $7.99 For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your Network installation. -Features:-Conductor: 4-pair (UTP) 24 AWG stranded copper-Connector: 50 micron Gold-plated RJ45-Jacket: PVC-Wired: TSB 568B (AT&T 258A)-Certification: TIA/EIA -Warranty: Lifetime-Color: Black-Length: 7ft-Mfr: Cables To Go 27154- Weight: 0.170lbs. |
|
|
CABLES TO GO 200′ Cat5e Snagless Patch Blue $37.99 Today’s advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distrubute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation |
|
|
CABLES TO GO 3-Feet CAT5E 350 MHz Snagless Patch Cable – Black 15180 $3.99 For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your Network installation. -Features:-Conductor: 4-pair (UTP) 24 AWG stranded copper-Connector: 50 micron Gold-plated RJ45-Jacket: PVC-Wired: TSB 568B (AT&T 258A)-Certification: TIA/EIA-Warranty: Lifetime-Color: Black-Length: 3ft-Mfr: Cables To Go-Weight: 0.090lbs-CABLES TO GO 15180 |
|
|
CABLES TO GO 50-Foot CAT6 550 MHz Snagless Patch Cable – Blue $19.99 For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. -Specifications: -Conductor: 4-pair (UTP) 24 AWG stranded copper-Connector: 50 micron gold-plated RJ45-Jacket: PVC-Standard: Category 6 TIA/EIA-568-B-2.1, draft -Manufacturer’s lifetime warranty |
|
|
CABLES TO GO 7ft Cat5E 350 MHz Snagless Patch Cable – Black 15196 $4.99 For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your Network installation. -Features:-Conductor: 4-pair (UTP) 24 AWG stranded copper-Connector: 50 micron Gold-plated RJ45-Jacket: PVC-Wired: TSB 568B (AT&T 258A)-Certification: TIA/EIA -Warranty: Lifetime-Color: Black-Length: 7ft-Mfr: Cables To Go- Weight: 0.170lbs |
|
|
CABLES TO GO 7ft Cat6 550 MHz Snagless Patch Cable – Black 27152 $5.99 For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your Network installation. -Features:-Conductor: 4-pair (UTP) 24 AWG stranded copper-Connector: 50 micron Gold-plated RJ45-Jacket: PVC-Wired: TSB 568B (AT&T 258A)-Certification: TIA/EIA -Warranty: Lifetime-Color: Black-Length: 7ft-Mfr: Cables To Go- Weight: 0.170lbs.-Cables To Go 27152 |
|
|
Cables To Go – 10ft CAT6 550Mhz Snagless Patch Cable Blue $9.99 With Cables To Go’s Cat6 550 MHz Snagless Patch Cables you can stay ahead of the game with the use of this high-speed cabling to distribute data, voice and video. These cables will deliver stable performance to 550 MHz. Each comes UL verified, and meets EIA/TIA Cat 6 TIA/EIA-568-B-2.1, draft 9 standards. These cables will handle bandwidth intensive applications up to 550 MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 MHz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. |
|
|
Cables To Go – 14ft CAT5E 350Mhz Snagless Patch Cable Blue $10.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distrubute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. |
|
|
Cables To Go – 5ft CAT6 550Mhz Snagless Patch Cable Black $9.99 With Cables To Go’s Cat6 550Mhz Snagless Patch Cables you can stay ahead of the game with the use of this high-speed cabling to distribute data, voice and video. These cables will deliver stable performance to 550 MHz. Each comes UL verified, and meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. These cables will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go Cat6 550Mhz Snagless Patch Cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat 5e Patch Cable – RJ-45 Male – RJ-45 Male – 14ft – Blue $8.25 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat 5e Patch Cable – RJ-45 Male – RJ-45 Male – 1ft – Blue $15.4 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat 5e Patch Cable – RJ-45 Male – RJ-45 Male – 25ft – Blue $10.5 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat 5e Patch Cable – RJ-45 Male – RJ-45 Male – 3ft – Blue $5 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat 5e Patch Cable – RJ-45 Male – RJ-45 Male – 5ft – Blue $5.75 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat 5e Patch Cable – RJ-45 Male – RJ-45 Male – 7ft – Blue $6.25 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat. 5E Patch Cable – RJ-45 Male – RJ-45 Male – 200ft – Blue $99.99 Today’s advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distrubute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certifications: TIA/EIA; UL Listed. |
|
|
Cables To Go Cat. 5E Patch Cable – RJ-45 Male – RJ-45 Male – 200ft – Gray $87.99 Today’s advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distrubute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certifications: TIA/EIA; UL Listed. |
|
|
Cables To Go Cat. 5e Patch Cable – RJ-45 Male – RJ-45 Male – 35ft – Blue $22.18 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat. 6 Patch Cable – RJ-45 Male – RJ-45 Male – 14ft – Blue $199.99 Fast, fast, fast – the three words that describe Cables To Go’s Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today’s and tomorrow’s bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Our all-new molded, snag-free clip prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively. Features: Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Perfect for Gigabit, Fast Ethernet, and Ethernet applications. Certifications: made from UL listed wire. |
|
|
Cables To Go Cat. 6 Patch Cable – RJ-45 Male – RJ-45 Male – 3ft – Yellow $5.1 Fast, fast, fast – the three words that describe Cables To Go’s Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today’s and tomorrow’s bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Note: These cables are for 10/100 ethernet only and wil not work for gigabit ethernet since only two pairs of this cable are crossed. Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Our all-new molded, snag-free clip prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively. Features: Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports. Crossed pin configuration allows you to connect two computers peer-to-peer without the need for a hub or switch. Perfect for connecting network switches and hubs without an uplink port to other switches and hubs. |
|
|
Cables To Go Cat. 6 Patch Cable – RJ-45 Male – RJ-45 Male – 50ft – Blue $14.68 For voice/data/video distribution it will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1 draft 9 standards and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.Constructed from high-quality cable and a shortened body plug this design minimizes Near-End Crosstalk (NEXT) levels.The molded snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation.Connector 1: RJ45 MaleConnector 2: RJ45 Male |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 10ft – Gray $17.99 DETAILS: Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum.For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these Cat6 cables provide the performance and look for today’s high-end networks. Product Description Cables to Go patch cable – 10 ft Type: Patch cable Technology: Shielded twisted pair (STP) Shielding Material: Foil with braid Wires per Cable: 8 wire(s) Features: Molded, stranded, snagless, gold plated connectors Length: 10 ft Connector(s): 1 x RJ-45 – male Connector(s) (Other Side): 1 x RJ-45 – male Compliant Standards: EIA/TIA-568B Category 6 Color: Gray Manufacturer Warranty: Limited lifetime warranty ALTERNATE ITEM #: 31217 UPC: 0757120312178 |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 10ft – Green $17.99 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Molded Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 14ft – Gray $22.99 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Molded Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 14ft – Red $22.99 Protect your high speed network from noise and electromagnetic interference when you connect with our shielded Cat6 patch cable. For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 25ft – Green $32.99 DETAILS: Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum.For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these Cat6 cables provide the performance and look for today’s high-end networks. Product Description Cables to Go patch cable – 25 ft Type: Patch cable Technology: Shielded twisted pair (STP) Shielding Material: Foil with braid Wires per Cable: 8 wire(s) Features: Molded, stranded, snagless, gold plated connectors Length: 25 ft Connector(s): 1 x RJ-45 – male Connector(s) (Other Side): 1 x RJ-45 – male Compliant Standards: EIA/TIA-568B Category 6 Color: Green Manufacturer Warranty: Limited lifetime warranty ALTERNATE ITEM #: 31226 UPC: 0757120312260 |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 35ft – Blue $39.99 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Molded Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 35ft – Gray $18.25 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Molded Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 35ft – Green $39.99 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Molded Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 35ft – Red $17.99 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Snagless Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 3ft – Blue $12.99 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Molded Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 3ft – Gray $12.99 DETAILS: Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum.For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these Cat6 cables provide the performance and look for today’s high-end networks. Product Description Cables to Go patch cable – 3 ft Type: Patch cable Technology: Shielded twisted pair (STP) Shielding Material: Foil with braid Wires per Cable: 8 wire(s) Features: Molded, stranded, snagless, gold plated connectors Length: 3 ft Connector(s): 1 x RJ-45 – male Connector(s) (Other Side): 1 x RJ-45 – male Compliant Standards: EIA/TIA-568B Category 6 Color: Gray Manufacturer Warranty: Limited lifetime warranty ALTERNATE ITEM #: 31214 UPC: 0757120312147 |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 3ft – Green $12.99 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Molded Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 3ft – Red $12.99 DETAILS: Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum.For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these Cat6 cables provide the performance and look for today’s high-end networks. Product Description Cables to Go patch cable – 3 ft Type: Patch cable Technology: Shielded twisted pair (STP) Shielding Material: Foil with braid Wires per Cable: 8 wire(s) Features: Molded, stranded, snagless, gold plated connectors Length: 3 ft Connector(s): 1 x RJ-45 – male Connector(s) (Other Side): 1 x RJ-45 – male Compliant Standards: EIA/TIA-568B Category 6 Color: Red Manufacturer Warranty: Limited lifetime warranty ALTERNATE ITEM #: 31200 UPC: 0757120312000 |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 5ft – Blue $13.99 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Molded Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 5ft – Red $6.75 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Snagless Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 7ft – Blue $14.99 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Molded Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat. 6 Shielded Patch Cable – RJ-45 Male – RJ-45 Male – 7ft – Red $14.99 Stay ahead of the game with Cables To Go’s Shielded Cat6 550Mhz Snagless Patch Cables. These high-speed cables are designed to deliver stable performance to 550MHz for distribution of data, voice and video. They will handle bandwidth intensive applications up to 550MHz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Each cable is designed to meet EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. For high-noise environments or applications where shielding is mandatory, these cables are a perfect fit. 60% braid over 100% foil grounded to the metal connector shell provides excellent shielding against EMI/RFI. The colored jacket makes these cables easy to distinguish, and even add style to more modern desktops. Whether patched in a panel or used to make the final connection at the desktop, these shielded Cat6 cables provide the performance and look for today’s high-end networks. Features: Connectors: 50-micron gold plated RJ-45 Male-to-Male with nickel-plated shielded shell. Conductor: 24 AWG Stranded Copper. 60% braid over 100% foil shield. PVC jacket. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5). 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5). 55/155 Mbps ATM. T1 voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Meets or exceeds all Category 6 TIA/EIA- 568-B-2.1, draft 9 standards. |
|
|
Cables To Go Cat.5e Patch Cable – Category 5e for Network Device, Modem – 100 ft – 1 x RJ-45 Male Network – 1 x RJ-45 Male Network – Gold-plated Connectors – Gray $15.41 For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat.5e Patch Cable – RJ-45 Male – RJ-45 Male – 20ft – Gray $9.25 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat.5e Patch Cable – RJ-45 Male – RJ-45 Male – 35ft – Gray $20.93 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat.5e Patch Cable – RJ-45 Male – RJ-45 Male – 3ft – Gray $5 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat.5e Patch Cable – RJ-45 Male – RJ-45 Male – 5ft – Gray $16.87 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat.5e Patch Cable – RJ-45 Male – RJ-45 Male – 7ft – Gray $6.25 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat.5e Stranded Patch Cable – RJ-45 Male – RJ-45 Male – 10ft – Gray $7 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat.5e Stranded Patch Cable – RJ-45 Male – RJ-45 Male – 14ft – Gray $8.25 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat.5e Stranded Patch Cable – RJ-45 Male – RJ-45 Male – 20ft – Blue $20.99 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat.5e Stranded Patch Cable – RJ-45 Male – RJ-45 Male – 25ft – Gray $20.24 Today’s advanced fast ethernet and gigabit computer networks require enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables can handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination point. Constructed with high-quality wire and a shortened body plug, this design will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go USA Cat5e 350Mhz Snagless Patch cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVCMolded, Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certification: TIA/EIA. |
|
|
Cables To Go Cat.5e UTP Patch Cable – RJ-45 Male Network – RJ-45 Male Network – 250ft – Gray $47.08 Today s advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distrubute data voice and video. Cables To Go s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVC. Molded Snag-Free boot prevents unwanted cable snags. Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice. Designed For: Network Adapters Hubs Switches Routers DSL/Cable Modems Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certifications: TIA/EIA; UL Listed. |
|
|
Cables To Go Cat.6 Patch Cable – RJ-45 Male – RJ-45 Male – 10ft – Gray $9.25 Stay ahead of the game with Cables To Go’s Cat6 550Mhz Patch Cables. These high-speed cables are an ideal solution for distributing data, voice and video, delivering stable performance to 550 MHz. Each cable meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. They will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go USA Cat6 550Mhz Patch Cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM, Wideband. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9. |
|
|
Cables To Go Cat.6 Patch Cable – RJ-45 Male – RJ-45 Male – 14ft – Blue $23.99 Stay ahead of the game with Cables To Go’s Cat6 550Mhz Patch Cables. These high-speed cables are an ideal solution for distributing data, voice and video, delivering stable performance to 550 MHz. Each cable meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. They will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go USA Cat6 550Mhz Patch Cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM, Wideband. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9. |
|
|
Cables To Go Cat.6 Patch Cable – RJ-45 Male – RJ-45 Male – 1ft – Blue $5.99 Stay ahead of the game with Cables To Go’s Cat6 550Mhz Patch Cables. These high-speed cables are an ideal solution for distributing data, voice and video, delivering stable performance to 550 MHz. Each cable meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. They will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go USA Cat6 550Mhz Patch Cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM, Wideband. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9. |
|
|
Cables To Go Cat.6 Patch Cable – RJ-45 Male – RJ-45 Male – 25ft – Blue $14.75 Stay ahead of the game with Cables To Go’s Cat6 550Mhz Patch Cables. These high-speed cables are an ideal solution for distributing data, voice and video, delivering stable performance to 550 MHz. Each cable meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. They will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go USA Cat6 550Mhz Patch Cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM, Wideband. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9. |
|
|
Cables To Go Cat.6 Patch Cable – RJ-45 Male – RJ-45 Male – 35ft – Blue $17.5 Stay ahead of the game with Cables To Go’s Cat6 550Mhz Patch Cables. These high-speed cables are an ideal solution for distributing data, voice and video, delivering stable performance to 550 MHz. Each cable meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. They will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go USA Cat6 550Mhz Patch Cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM, Wideband. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9. |
|
|
Cables To Go Cat.6 Patch Cable – RJ-45 Male – RJ-45 Male – 7ft – Blue $17.99 Stay ahead of the game with Cables To Go’s Cat6 550Mhz Patch Cables. These high-speed cables are an ideal solution for distributing data, voice and video, delivering stable performance to 550 MHz. Each cable meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. They will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go USA Cat6 550Mhz Patch Cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM, Wideband. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9. |
|
|
Cables To Go Cat.6 Patch Cable – RJ-45 Male – RJ-45 Male – 7ft – Purple $15.48 For voice/data/video distribution it will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1 draft 9 standards and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.Constructed from high-quality cable and a shortened body plug this design minimizes Near-End Crosstalk (NEXT) levels.The molded snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation.Connector 1: RJ45 MaleConnector 2: RJ45 Male |
|
|
Cables To Go Cat.6 Stranded Patch Cable – RJ-45 Male – RJ-45 Male – 1ft – Gray $9.99 Stay ahead of the game with Cables To Go’s Cat6 550Mhz Patch Cables. These high-speed cables are an ideal solution for distributing data, voice and video, delivering stable performance to 550 MHz. Each cable meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. They will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go USA Cat6 550Mhz Patch Cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM, Wideband. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9. |
|
|
Cables To Go Cat.6 Stranded Patch Cable – RJ-45 Male – RJ-45 Male – 20ft – Gray $12.5 Stay ahead of the game with Cables To Go’s Cat6 550Mhz Patch Cables. These high-speed cables are an ideal solution for distributing data, voice and video, delivering stable performance to 550 MHz. Each cable meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. They will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go USA Cat6 550Mhz Patch Cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM, Wideband. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9. |
|
|
Cables To Go Cat.6 Stranded Patch Cable – RJ-45 Male – RJ-45 Male – 25ft – Gray $14.75 Stay ahead of the game with Cables To Go’s Cat6 550Mhz Patch Cables. These high-speed cables are an ideal solution for distributing data, voice and video, delivering stable performance to 550 MHz. Each cable meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. They will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go USA Cat6 550Mhz Patch Cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM, Wideband. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9. |
|
|
Cables To Go Cat.6 Stranded Patch Cable – RJ-45 Male – RJ-45 Male – 35ft – Gray $22 Stay ahead of the game with Cables To Go’s Cat6 550Mhz Patch Cables. These high-speed cables are an ideal solution for distributing data, voice and video, delivering stable performance to 550 MHz. Each cable meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. They will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go USA Cat6 550Mhz Patch Cables are available in multiple colors, allowing easy color-coding of your network installation. These high-speed patch cords are 100% manufactured and tested within the United States. They are an ideal solution for anyone that needs to procure products that are manufactured exclusively in the USA. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded, Snag-Free boot prevents unwanted cable snags. Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3). 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM, Wideband. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications. Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9. |
|
|
Cables To Go Cat.6 UTP Patch Cable – Category 6 for Network Device – 15 ft – 1 x RJ-45 Male Network – 1 x RJ-45 Male Network – Gold-plated Connectors – Black $18.99 For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat.6 UTP Patch Cable – Category 6 for Network Device – 15 ft – 1 x RJ-45 Male Network – 1 x RJ-45 Male Network – Gold-plated Connectors – Blue $18.99 For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 100ft – Black $62.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 100ft – Blue $62.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 100ft – Gray $62.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 100ft – Green $17 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 100ft – Red $16.94 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 100ft – White $21.09 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 100ft – Yellow $62.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 12 – Black $6.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 12 – Gray $2.25 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 12 – Green $6.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 12 – Red $6.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 12 – White $6.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 12 – Yellow $6.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 150ft – Black $74.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 150ft – Blue $27.25 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 150ft – Gray $74.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 150ft – Green $27.25 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 150ft – Red $27.25 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 150ft – White $27.25 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 150ft – Yellow $27.25 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 25ft – White $16.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 50ft – Gray $31.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |
|
|
Cables To Go Cat5e Patch Cable – RJ-45 Male – RJ-45 Male – 50ft – Red $31.99 Today’s advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go’s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. |