Digi-CordComputer Cords and Cables

Orioles’ top pick Bundy a mix of sweat and swagger
High school pitcher’s dedication, swagger stand out as much as prodigious talents A decade before the Orioles selected high school right-hander Dylan Bundy with the fourth pick in the 2011 amateur draft, he was a stocky 8-year-old kid growing up Sperry, Okla. Playing on a field he helped forge from dirt on his family’s land, Bundy’s work ethic and bravado were evident early on. His baseball …
Injection Molding troubleshooting for Plastic Injection Molding Defects

New Trademark Red 13 Function Swiss Type Army Knife 3.5 Inches Closed Stainless Steel Blade …

Mack’s Pillow Soft Silicone Earplugs, Value Pack, 6 pr $3.30 The original silicone putty. No. 1 doctor recommended brand. Snore proof. Water proof. Swim, sleep, study, shower, work, travel, sports, loud events, flying discomfort, etc. Helps prevent swimmer’s ear. Noise Reduction Rating: 22 decibels (when used as directed). The range of noise reduction rating for existing hearing protectors is approximately 0 to 30 (high numbers denote greater effectiveness)…

9v Battery Clip (I-Type), 6 Leads 2 for 1.00 Heavy duty molded plastic 9 Vdc battery clips. 6″ leads, I-Type….

Williams Sound PKTD1H26 – Pocketalker Ultra Personal Amplifier with HED026 Behind-the-Neck Headphone $139.00 Improve your hearing – improve your life with the new Pocketalker Ultra from Williams Sound! The Pocketalker Ultra amplifies sounds closest to the listener while reducing background noise. The Pocketalker Ultra features a lightweight, ergonomic design for portability and ease of use. Finger tip adjustable volume control allows you to quickly adjust to your listening environment – whether your hear…

Women’s Ryka® Athletic Shoes White / Silver / Blue $80.00 These treat your feet like a lady! Women’s Ryka Athletic Shoes, BIG BUCKS OFF! They’re from Ryka, the only performance athletic brand in the world committed to women, engineering just for the female foot. These will pound the pavement, but not give your feet and body a pounding. Your wallet stays cushioned, too, thanks to an excess inventory deal! Mesh and synthetic leather uppers with breathabili…

Radians CEP001-T Tan Custom Molded Earplugs $9.30 For your ears only: Radians Custom Molded Earplugs. USA MADE! A perfect fit for shooting sports, construction work, ATVing, and more! These easy do-it-yourself Plugs take about 10 minutes to mold to the exact shape of your ear for a soft, permanent custom fit like no other. Made from soft, non-toxic and hypoallergenic silicone that’s long-lasting and washable. Environmentally friendly, too. Noise …

Tripp Lite TLP810SAT 8-Outlet Surge Protector (3240 Joules, Tel/DSL/Coax) $33.24 Tripp Lite’s TLP810SAT Surge Suppressor offers complete AC, telephone and coax line surge suppression on two lines for comprehensive system protection of home theaters, a/v systems and desktop PCs. Heavy grade AC surge suppression shields connected equipment from damage and performance problems due to the heaviest transient surges. Two pairs of coax line suppression jacks protect any two type F co…

Simmons 4802 Frost Proof Bury Yard Hydrants (Not CA/VT Compliant) $60.99 1-piece variable flow plunger, large cushion type seal not easily damaged. Positive shut-off even when foreign particles are present. Automatic drain feature. Plunger opens drain to prevent freezing, closes at any flow to prevent wasting water. Tamperproof lock can be locked in close position by inserting padlock or bolt thru hole in link. Overall length of hydrant is bury depth plus 24″. Specific…

Battle Force Soldiers: 50 piece Green vs. Pink Plastic Army Men 2 inch Figure Playset $2.98 These are Team Xtreme Soldiers by JA-RU® Suitable for Ages 4 & Older FEATURES: Durable plastic construction. Self-standing. Detailed soldiers molded in a variety of action poses, and in 2 different plastic colors. INCLUDES: (50) Figures…

1/10 Molded Wing Set, Black $6.48 This is the HPI Molded Wing Set for 1/10 On-Road Touring Cars.FEATURES: Molded Nylon Construction Black in ColorINCLUDES: One Realistic Scale Wing One High Downforce Wing Two Mounting Brackets One Parts Tree with misc. brackets to fit different bodies Eight 2.6mm x 8mm Flat Head Self Tapping Screws Two 3mm x 10mm Round Head Self Tapping ScrewsREQUIRES: Assembly onto BodyHPIPart HPI85197…

Guardian Molded Quad Cane, Type Adult Molded Quad $48.04 The Guardian Molded Quad Cane is engineered and tested to ensure performance and quality. Soft foam handgrip enhances comfort. A locking silencer provides rattle-free use, while a solid brass detent button resists wear and breakage. Handle inserts and reinforced metal inserts at stress points provide greater strength and durability. Contoured vinyl handgrip is easier to grasp and offers enhanced durability for long-term use. Select Quadlite Molded resin base is strong yet light-weight, offering a slight flex for self-leveling and stability.

Slippery Luxe Molded Vest 32400380 $74.95 U.S. Coast Guard-approved Type 3 PFD (Personal Flotation Device) Made of fully molded 5mm neoprene for comfort and durability Entry is front-zip with two 1.5 in. belts featuring quick-lock buckles; tunneled belt system preventt

Slippery Luxe Molded Vest 32400385 $74.95 U.S. Coast Guard-approved Type 3 PFD (Personal Flotation Device) Made of fully molded 5mm neoprene for comfort and durability Entry is front-zip with two 1.5 in. belts featuring quick-lock buckles; tunneled belt system preventt

Maxrad MEXC450BN 450470 Mhz 6 in. Molded Duck $33.35 450470 MHz 1/4 Wave 6 Molded Portable Antenna BNC Conn. Connector Type: BNC Male(BN). Fits Radio Models Any Radio Model equipped with BNC Female.

Drive-Rite Molded Heater Hose – 303709 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303754 $28.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303614 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 302819 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304390 $15.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300146 $14.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303710 $14.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303305 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303633 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303638 $9.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303640 $9.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303700 $15.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304353 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304374 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303765 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303788 $14.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300111 $12.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304356 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304402 $35.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300140 $13.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303316 $9.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303319 $23.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303632 $7.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303729 $13.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303782 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303679 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304394 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303318 $16.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303761 $15.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303797 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303748 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303659 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303753 $57.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303776 $25.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303871 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304411 $19.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303785 $14.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300076 $14.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303310 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300067 $16.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303623 $12.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303642 $13.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304406 $26.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303809 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303807 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303839 $12.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303687 $16.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304458 $23.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300077 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303653 $5.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303658 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303611 $22.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303772 $15.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304405 $20.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303876 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303750 $5.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304368 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303721 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300121 $7.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300080 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303618 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303001 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303786 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303002 $7.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303648 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303643 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303661 $17.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303682 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303714 $15.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303615 $15.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303749 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303668 $17.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303720 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303758 $8.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303699 $11.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303317 $16.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304367 $9.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303779 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303802 $7.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300071 $3.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303712 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304418 $19.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300128 $14.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303300 $7.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303304 $13.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303769 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303727 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304386 $12.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303734 $23.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303793 $56.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303759 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303684 $20.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300123 $12.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303624 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303655 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303716 $25.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304384 $11.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304393 $12.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304412 $35.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304426 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303691 $29.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303777 $71.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304444 $13.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303000 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303675 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304371 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304391 $17.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303778 $59.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304433 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303646 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303617 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304389 $19.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303825 $46.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303694 $7.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304355 $9.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300072 $8.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303309 $12.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303677 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303790 $33.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 302818 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303742 $28.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 302808 $4.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300116 $15.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304363 $5.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304369 $8.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300113 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303821 $12.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300088 $12.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 302815 $5.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303818 $15.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304379 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303313 $6.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303608 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303667 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303706 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303846 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303657 $11.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303768 $19.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303637 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303693 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304404 $10.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303823 $27.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304417 $25.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303791 $23.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303751 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303890 $23.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303604 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303766 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303817 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304432 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 302803 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303697 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304397 $19.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304396 $25.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304400 $9.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303660 $8.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303836 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F to +257 F . In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303798 $7.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303670 $6.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303616 $19.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300097 $17.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303603 $12.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303828 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300100 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303620 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303005 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303803 $7.99 This small-I.D. molded heater hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants and temperature variations of -40 F to +257 F. In addition to meeting SAE J20R4, Class D-2 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s small-I.D. molded heater hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300142 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303713 $15.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303806 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303621 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303834 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300144 $34.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303698 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300099 $21.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303673 $13.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303723 $16.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304351 $18.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304420 $31.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300124 $19.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300084 $9.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303830 $6.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303820 $13.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 304410 $8.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300125 $20.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303801 $14.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 302823 $4.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 302800 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303822 $19.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 300085 $10.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303301 $5.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303612 $11.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303671 $13.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303760 $15.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303730 $14.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.

Drive-Rite Molded Heater Hose – 303702 $17.99 This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″ I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 F (-40 C) to +257 F (+125 C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts.