Posted by admin | Posted in Cords and Cables | Posted on 29-03-2011
Tags: allied tubing conduit, conduit, electrical metallic tubing conduit, pipe, steel, tubing, tubing conduit benders, tubing conduit cutter, tubing conduits, water
Isn’t it nice to see somebody is actually enforcing our laws MCSO raids Phoenix business?
PHOENIX – The Maricopa County Sheriff’s Office conducted an immigration raid at a Phoenix business Tuesday morning.
MCSO arrived at Allied Tube and Conduit near 27th Avenue and Thomas Road looking for eight identity theft suspects around 9:30 a.m.
Deputies arrested four suspected illegal immigrants on forgery and identity theft charges.
MCSO previously received an anonymous tip that the business was hiring illegal employees.
http://www.azfamily.com/news/local/MCSO-raids-Phoenix-business-120723089.html
I love it, I just wish the rest of these sheriffs offices would enforce the laws also!
Cut conduit with a tubing cutter
|
|
Ridgid 32975 1/8-Inch to 5/8-Inch Close Quarters Tubing Cutter $11.54 Designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass, and plastic tubing. Strong, lightweight slide and wheel housing, large knurled feed screw knob gives wasy control of cutting pressure for clean cuts. The model 117 and 118 have all of the features on the No. 101 plus a self-feeding cutter wheel that automatically cuts after tightening the knob only once… |
|
|
Greenlee 1940 Flex Splitter Flexible Metal Conduit Cutter $10.24 Cut flexible metal conduit in seconds with a few turns of the crank and an easy twist of the conduit. Set conduit size for multiple cuts of the same size conduit. No need to reset. Set blade adjustment with only a screwdriver. Convenient in-handle blade storage holds up to five spare blades…. |
|
|
Jorgensen 50 Pony 3/4-Inch Pipe Clamp Fixture $10.99 This 3/4″ pipe clamp set incorporates standard Acme cut steel threaded screws for a securing hold and final tightening. The tail-stop features a multiple-disc-clutch for fast easy adjustments while holding work securely. Often considered the industry standard for pipe clamps, “Pony” clamps are made in the USA and designed to be used on standard 3/4″ black pipe to offer the flexibility of creating … |
|
|
American Terminal SL500-100 1/2-Inch Split Loom Tubing $9.98 PROVIDE EXCELLENT PROTECTION TO COVER WIRE CABLE ;& HOSESGIVES EXCELLENT RESISTANCE TO GASOLINE OIL & OTHER CAUSTIC AGENTS100-FT LENGTH.5″ DIAUPC : 663283914756Shipping Dimensions : 15.00in X 11.50in X 5.00inEstimated Shipping Weight : 5.1958… |
|
|
American Terminal SL1000-100 1-Inch Split Loom Tubing $19.99 PROVIDE EXCELLENT PROTECTION TO COVER WIRE CABLE ;& HOSESGIVES EXCELLENT RESISTANCE TO GASOLINE OIL & OTHER CAUSTIC AGENTS100-FT LENGTH1″ DIAUPC : 663283914701Shipping Dimensions : 21.00in X 16.00in X 9.00inEstimated Shipping Weight : 18.2169… |
|
|
Hosa WHD410 Cable Organizer $18.00 10 Foot 1 inch Split-loom Cable Organizer, Black Plastic… |
|
|
Magnaflow 10790 Tru – X Stainless Steel 2.25 Exhaust Pipe $63.16 Tru-X; Stainless Steel Crossover Pipe; 2.25 in. Inlet I.D.; Dual Inlet/Dual Outlet; 2.5 x 4 in. Center Core; 12 in. Length; – Increases Rear Wheel Horsepower And Torque – Improved Version Of Traditional H-Pipe – Improves Exhaust Scavenging – Noticeable Reduction In DB Levels… |
|
|
Trellis Craft: How to Make Your Own Copper Pipe Garden Ornaments $21.95 From a review: “I highly recommend this book! Directions are very clear, it offers a wide variety of designs for garden items using copper pipe. It has a concise list of supplies and equipment to both buy and make, with easy to understand directions for how to use everything safely. Can’t wait to get started! This book gives you the knowledge and confidence!”… |
|
|
Steel Electrical Raceways BOOK… |
|
|
Split Conduit Tubing 1 I.D. $1.09 Corrugated, split polyethylene provides excellent conduit for multiple wire or cable routing. Creates quality appearance in wiring systems. Ideal for hose abrasion protection. Specifically formulated in accordance with UL94 V2 tests for flammability and meets tough ABYC standards. 3′ minimum order…. |
|
|
Ridgid 63232910 Tubing and Conduit Cutter $46.04 Clean square cuts are easily made on copper brass aluminum and thinwall conduit. Nos. 10 15 20 feature a convenient foldaway reamer . No. 30 is rated for larger diameter steel and stainless steel tubing . No. 15SI is especially designed for stainless steel tubing |
|
|
Ridgid 63232920 15 Tubing and Conduit Cutter $50.95 Clean square cuts are easily made on copper brass aluminum and thinwall conduit. Nos. 10 15 20 feature a convenient foldaway reamer . No. 30 is rated for larger diameter steel and stainless steel tubing . No. 15SI is especially designed for stainless steel tubing |
|
|
Ridgid 63232930 20 Tubing and Conduit Cutter $90.16 Clean square cuts are easily made on copper brass aluminum and thinwall conduit. Nos. 10 15 20 feature a convenient foldaway reamer . No. 30 is rated for larger diameter steel and stainless steel tubing . No. 15SI is especially designed for stainless steel tubing |
|
|
Panduit Corrugated Loom Tubing Solid 100ft Cable Flexible Conduit Orange CLTS100F-C3 $75.12 Panduit Corrugated Loom Tubing Solid 100ft Cable Flexible Conduit Orange CLTS100F-C3 |
|
|
Klein Tools 53730 Electrician’s Tubing Cutter $36.48 Klein Tools 53730 Electrician’s Tubing Cutter Klein Tools 53730 Electrician’s Tubing Cutter Features: Patented cutting wheel cuts and cleanly snaps the conduit without leaving a burr inside Can be used to cut conduit with wire â no wire damage Used for cutting 1/2″ and 3/4″ EMT Conduit Easy to use â tighten handle, cut the circumference of the conduit, snap the conduit. Klein Tools 53730 Electrician’s Tubing Cutter Specifications: Conduit Diameter: cuts 1/2″ and 3/4″ EMT conduit Description: Electrician’s Tubing Cutter Length: 7″ – 8-1/4″ Weight (lbs.): 2.00 |
|
|
Thomas And Betts Lamson 1in. Type T Conduit E983FRCAR $23.45 Conduit |
|
|
KD Tools Tubing Cutter. Each $23.63 Manufacturer: KD Tools. Each. Features and Benefits: Tool cuts tubing, copper, brass, aluminum and thin wall conduit Features a 1/8″” to 1-1/8″” capacity and has a reamer blade to clean off and smooth any sharp edges Both the cutter wheels and reamer ar |
|
|
Ridgid 30 Tubing Cutter. Each $98.62 Manufacturer: Ridgid. Each. Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit Nos. 10, 15, 20 feature a convenient fold-away reamer No. 30 is rated for larger diameter steel and stainless steel tubing No. 15-SI is especi |
|
|
Ridgid 10 Tubing Cutter. Each $29.5 Manufacturer: Ridgid. Each. Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit Nos. 10, 15, 20 feature a convenient fold-away reamer No. 30 is rated for larger diameter steel and stainless steel tubing No. 15-SI is especi |
|
|
Ridgid 15 Tubing Cutter. Each $33.11 Manufacturer: Ridgid. Each. Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit Nos. 10, 15, 20 feature a convenient fold-away reamer No. 30 is rated for larger diameter steel and stainless steel tubing No. 15-SI is especi |
|
|
Ridgid 20 Tubing Cutter. Each $63.73 Manufacturer: Ridgid. Each. Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit Nos. 10, 15, 20 feature a convenient fold-away reamer No. 30 is rated for larger diameter steel and stainless steel tubing No. 15-SI is especi |
|
|
Ridgid 63297212 15Si Stainless Steel Tubing Cutter $68.93 Clean square cuts are easily made on copper brass aluminum and thinwall conduit . Nos. 10 15 20 feature a convenient foldaway reamer . No. 30 is rated for larger diameter steel and stainless steel tubing . No. 15SI is especially designed for stainless steel tubing |
|
|
Tacoma Electric EMT050 1/2 EMT Conduit (10 Pack) $29.02 Tacoma Electric EMT050 1/2″ EMT Conduit (10 Pack) Tacoma Electric EMT050 1/2″ EMT Conduit (10 Pack) Features: Electrical metallic tubing, EMT, is used as a raceway for electrical wiring For thin wall applications Easy to cut and bend reducing waste and installation time Non combustible and easily adaptable to future wiring changes A proven equipment grounding conductor and can reduce electromagnetic fields by up to 95% Galvanized steel UL listed 1/2″ diameter 10′ length |
|
|
Tacoma Electric EMT075 3/4 EMT Conduit (10 Pack) $96.19 Tacoma Electric EMT075 3/4″ EMT Conduit (10 Pack) Tacoma Electric EMT075 3/4″ EMT Conduit (10 Pack) Features: Electrical metallic tubing, EMT, is used as a raceway for electrical wiring For thin wall applications Easy to cut and bend reducing waste and installation time Non combustible and easily adaptable to future wiring changes A proven equipment grounding conductor and can reduce electromagnetic fields by up to 95% Galvanized steel UL listed 3/4″ diameter 10′ length |
|
|
Tacoma Electric EMT100 1 EMT Conduit (10 Pack) $90.88 Tacoma Electric EMT100 1″ EMT Conduit (10 Pack) Tacoma Electric EMT100 1″ EMT Conduit (10 Pack) Features: Electrical metallic tubing, EMT, is used as a raceway for electrical wiring For thin wall applications Easy to cut and bend reducing waste and installation time Non combustible and easily adaptable to future wiring changes A proven equipment grounding conductor and can reduce electromagnetic fields by up to 95% Galvanized steel UL listed 1″ diameter 10′ length |
|
|
Conduit $4.99 We believe it is important to preserve what makes music special, and make it easy to craft listening experiences. At MOG, browse millions songs and play them instantly. Or just turn on radio where you can stop and replay songs. You can also create playlists for any occasion, and even download songs to your mobile. We are dedicated to employing the cleanest but most powerful technology so you can enjoy music as much as ever. |
|
|
The Conduit $25.34 No Synopsis Available |
|
|
Superior Tool 35219 Enclosed Feed Tubing Cutter $18.18 Superior Tool 35219 Enclosed Feed Tubing Cutter Superior Tool 35219 Enclosed Feed Tubing Cutter Cuts hard or soft copper tubing, brass, aluminum and thin wall conduit Enclosed feed mechanism protects threads against dirt and damage Quick to operate in the field, spin open and spin closed Easy swing out reamer blade, hardened for long life 1/8″ – 1-3/16″ capacity Carded |
|
|
Ridgid 15-si Stainless Steel Tubing Cutter. Each $48.73 Manufacturer: Ridgid. Each. Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit Nos. 10, 15, 20 feature a convenient fold-away reamer No. 30 is rated for larger diameter steel and stainless steel tubing No. 15-SI is especi |
|
|
KD Tools KDT3457 Tubing Cutter Capacity $39.99 Tool cuts tubing copper brass aluminum and thin wall conduit. Features a 1/8 to 11/8 capacity and has a reamer blade to clean off and smooth any sharp edges. Both the cutter wheels and reamer are made of hardened alloy steel. |
|
|
Superior Tool ST2000 Tubing Pipe Cutter 36878 $48.22 Tubing and pipe cutter. Cuts up to 1 schedule 40 pipe and 2 copper tubing.63 to 2.13 OD capacity for tubing conduit and steel fencing.38 to 1 OD capacity for steel or iron pipe including galvanized. Made of strong lightweight aluminum construction and a comfort non slip polymer grip. Durable epoxy powder coated finish for corrosion resistance and durability. Heat treated alloy steel cutting wheel. A favorite for versatility this tool ships with the cutter wheel for copper iron and steel. By replacing the wheel it can also cut aluminum and copper or PVC CPVC and ABS. Length: 10.75. Width: 5.25. Height: 5.25 |
|
|
Superior Tool Enclosed Feed Tubing Cutter 35219 $37.54 Cuts hard or soft copper tubing brass aluminum and thin wall conduit. Enclosed feed mechanism protects threads against dirt and damage. Quick to operate in the field spin open and spin closed. Easy swing out reamer blade hardened for long life.13 13/16 capacity. Carded. Length: 7.63. Width: 1.5. Height: 4.13 |
|
|
Checkpoint 610PL Checkpoint Torpedo Level U6 VGroove with Conduit Magnets Platinum $50.97 There is NO level like the U6 VGroove Its patented design incorporates more degree readings than any level in its class to meet any contractor s needs with readings at 0 22.5 30 45 60 and 90 degrees. And with our 45 min./arc reading bubble vial you get precise and accurate readings every time. Superdeep VGroove System that s designed to fit radius pipes and conduits to give clear easytosee readings every time. It also has 16 rareearth neodymium magnets for incredible holding strength on any steel pipe conduit or tubing where precision bends are required. CNCmachined from solid 6061T6 aluminum billet the U6 VGroove is buffpolished and rospaceanodized in Platinum. Finished with laseretched graphics the U6 VGroove measures in at a supercompact 2.5 x 2 and is sure to be the professional tradesman s goto tool at the job site. A convenient protective belt case is included free with every U6 VGroove to ensure it s as safe on the job as you are. The U6 VGroove is another CHECKPOINT No Compromise product that s built to stand and deliver for the hardworking professional |
|
|
Checkpoint 610BK Checkpoint Torpedo Level U6 VGroove with Conduit Magnets Black $50.97 There is NO level like the U6 VGroove Its patented design incorporates more degree readings than any level in its class to meet any contractor s needs with readings at 0 22.5 30 45 60 and 90 degrees. And with our 45 min./arc reading bubble vial you get precise and accurate readings every time. Superdeep VGroove System that s designed to fit radius pipes and conduits to give clear easytosee readings every time. It also has 16 rareearth neodymium magnets for incredible holding strength on any steel pipe conduit or tubing where precision bends are required. CNCmachined from solid 6061T6 aluminum billet the U6 VGroove is buffpolished and rospaceanodized in Black. Finished with laseretched graphics the U6 VGroove measures in at a supercompact 2.5 x 2 and is sure to be the professional tradesman s goto tool at the job site. A convenient protective belt case is included free with every U6 VGroove to ensure it s as safe on the job as you are. The U6 VGroove is another CHECKPOINT No Compromise product that s built to stand and deliver for the hardworking professional |
|
|
Checkpoint 610B Checkpoint Torpedo Level U6 VGroove with Conduit Magnets Blue $59.11 There is NO level like the U6 VGroove Its patented design incorporates more degree readings than any level in its class to meet any contractor s needs with readings at 0 22.5 30 45 60 and 90 degrees. And with our 45 min./arc reading bubble vial you get precise and accurate readings every time. Superdeep VGroove System that s designed to fit radius pipes and conduits to give clear easytosee readings every time. It also has 16 rareearth neodymium magnets for incredible holding strength on any steel pipe conduit or tubing where precision bends are required. CNCmachined from solid 6061T6 aluminum billet the U6 VGroove is buffpolished and rospaceanodized in Royal Blue. Finished with laseretched graphics the U6 VGroove measures in at a supercompact 2.5 x 2 and is sure to be the professional tradesman s goto tool at the job site. A convenient protective belt case is included free with every U6 VGroove to ensure it s as safe on the job as you are. The U6 VGroove is another CHECKPOINT No Compromise product that s built to stand and deliver for the hardworking professional |
|
|
Checkpoint 610R Checkpoint Torpedo Level U6 VGroove with Conduit Magnets Red $59.11 There is NO level like the U6 VGroove Its patented design incorporates more degree readings than any level in its class to meet any contractor s needs with readings at 0 22.5 30 45 60 and 90 degrees. And with our 45 min./arc reading bubble vial you get precise and accurate readings every time. Superdeep VGroove System that s designed to fit radius pipes and conduits to give clear easytosee readings every time. It also has 16 rareearth neodymium magnets for incredible holding strength on any steel pipe conduit or tubing where precision bends are required. CNCmachined from solid 6061T6 aluminum billet the U6 VGroove is buffpolished and rospaceanodized in Brilliant Red Finished with laseretched graphics the U6 VGroove measures in at a supercompact 2.5 x 2 and is sure to be the professional tradesman s goto tool at the job site. A convenient protective belt case is included free with every U6 VGroove to ensure it s as safe on the job as you are. The U6 VGroove is another CHECKPOINT No Compromise product that s built to stand and deliver for the hardworking professional |
|
|
TUBING CONNECTRS $1.03 TUBING CONNECTRS |
|
|
Halex adalet 3in. Conduit Hanger With Nut Bolt 67830 $21.51 Conduit hanger |
|
|
Halex adalet 4in. Conduit Hanger With Nut Bolt 67840 $21.68 Conduit hanger |
|
|
Milwaukee Sawzall Blade 12”-18 Teeth per Inch – 5 Pack $26.95 For cutting metal 1/8 in. thru 3/16 in., conduit, tubing, channels, and pipe. |
|
|
Milwaukee Sawzall? Bi-Metal Blades 6” x 18T – 50 Pack $117.95 For cutting metal 1/8 in. thru 3/16 in., conduit, tubing, channels, and pipe. |
|
|
Milwaukee Sawzall Blade 6”-18 Teeth per Inch – 5 Pack $18.95 For cutting metal 1/8 in. thru 3/16 in., conduit, tubing, channels, and pipe. |
|
|
Milwaukee Sawzall Blade 9”-18 Teeth per Inch – 5 Pack $22.95 For cutting metal 1/8 in. thru 3/16 in., conduit, tubing, channels, and pipe. |
|
|
CONDUIT SPEAKER MOUNT RAL 9002 $58.99 CONDUIT SPEAKER MOUNT RAL 9002 |
|
|
General Tools 133 E-Z Ratcheting Tubing Cutter (1-1/8) $20.54 General Tools 133 E-Z Ratcheting Tubing Cutter (1-1/8″) The EZ Ratchet Tubing Cutter allows you the ability to make close-quarter cuts without sacrificing the comfort or leverage you enjoy from a standard-size tubing cutter. Using an innovative, 360 degree ratcheting mechanism, the EZ Cutter rotates around the pipe for smooth, clean cuts. The EZ is great for cutting conduit that has been placed near a wall or other piping that would not allow the full rotation of a standard cutter. Includes an extra tempered cutting wheel stored on the handle. General Tools 133 E-Z Ratcheting Tubing Cutter (1-1/8″) Features: Adjustable jaws accept 5/16â to 1-1/8â tubing sizes Extended rubber handle increases leverage and reduces strain on the palm Ratchet cutter rotates 360 degrees around pipe in 5 degree increments For copper, aluminum, brass and thin-wall stainless steel up to 1/8â thickness Grooved rollers accept flared pipe ends to provide cuts directly below the flare Includes replacement cutting wheel and handle storage Replacement wheel RW121/2 Instructions: Cutting Tubing: 1. Position tubing cutter around pipe and tighten knob until pipe is snug between blade and rollers. 2. Turn the knob an extra one-half revolution for the first cut. 3. Begin using the ratchet handle to turn the cutter around the pipe. 4. As the tool cuts through the pipe, tighten the knob to keep pressure on the cutting surface. 5. Continue ratcheting the cutter and tightening the adjustment knob until the pipe is cut. 6. Use a reamer to remove any burrs formed on the surface of the pipe Cutting Flared Pipe: 1. Insert the flared end of the pipe into the tubing cutter. 2. Align the pipe so that the flare sits in the grooved rollers 3. Tighten the adjustment knob until the blade is contacting the pipe below the flare. 4. Follow the tube cutting procedure above. Ratcheting action rotates the cutter around the tube allowing a standard size cutter to be used in close quarter applications Longer handle requires less effort to rotate cutter reducing hand fatigue Wide hardened flared clearance grooved rollers allow true cuts close to flared end tubing to avoid tube replacement in existing installations Cuts copper, brass, aluminum tubing, and thin wall conduit Spare cutting wheel supplied in handle |
|
|
General Tools RW121/2 E-Z Ratcheting Tubing Cutter (1-1/8) $6.75 General Tools RW121/2 E-Z Ratcheting Tubing Cutter (1-1/8″) The EZ Ratchet Tubing Cutter allows you the ability to make close-quarter cuts without sacrificing the comfort or leverage you enjoy from a standard-size tubing cutter. Using an innovative, 360 degree ratcheting mechanism, the EZ Cutter rotates around the pipe for smooth, clean cuts. The EZ is great for cutting conduit that has been placed near a wall or other piping that would not allow the full rotation of a standard cutter. Includes an extra tempered cutting wheel stored on the handle. General Tools RW121/2 E-Z Ratcheting Tubing Cutter (1-1/8″) Features: Adjustable jaws accept 5/16â to 1-1/8â tubing sizes Extended rubber handle increases leverage and reduces strain on the palm Ratchet cutter rotates 360 degrees around pipe in 5 degree increments For copper, aluminum, brass and thin-wall stainless steel up to 1/8â thickness Grooved rollers accept flared pipe ends to provide cuts directly below the flare Includes replacement cutting wheel and handle storage Replacement wheel RW121/2 Instructions: Cutting Tubing: 1. Position tubing cutter around pipe and tighten knob until pipe is snug between blade and rollers. 2. Turn the knob an extra one-half revolution for the first cut. 3. Begin using the ratchet handle to turn the cutter around the pipe. 4. As the tool cuts through the pipe, tighten the knob to keep pressure on the cutting surface. 5. Continue ratcheting the cutter and tightening the adjustment knob until the pipe is cut. 6. Use a reamer to remove any burrs formed on the surface of the pipe Cutting Flared Pipe: 1. Insert the flared end of the pipe into the tubing cutter. 2. Align the pipe so that the flare sits in the grooved rollers 3. Tighten the adjustment knob until the blade is contacting the pipe below the flare. 4. Follow the tube cutting procedure above. Hardened alloy and tool steel cutter wheels Fits all General tubing cutters Carded |
|
|
Dorman – Conduct-Tite 1/4 In., 3/8 In., 1/2 In. Spiral Tubing Assortment – 85644 $5.99 Dorman offers a comprehensive line of Wire Conduit for almost any automotive electrical repair. All our Wire Conduit is constructed of high-quality materials for long-lasting durability.Product Features:Available in both insulated and uninsulated versionsMany different lengths availableConveniently packaged in a variety of piece counts to assist with both small and large projectsAlso suitable for a broad variety of household, industrial and commercial uses. Most Electrical and Wiring products are available for in-store pickup from Advance Auto Parts. |
|
|
Halex 61930 Conduit Locknut $4.88 Halex 61930 Conduit Locknut Halex 61930 Conduit Locknut Features: Trade Size: 3″ Material: Steel Application: Indoors or Outdoors. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure Carton Type: Tray Box |
|
|
Halex 26196 Conduit Locknut $7.76 Halex 26196 Conduit Locknut Halex 26196 Conduit Locknut Features: Trade Size: 2″ Material: Steel Application: Indoors or Outdoors. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure Carton Type: Bag |
|
|
Halex 26191 Conduit Locknut $5.01 Halex 26191 Conduit Locknut Halex 26191 Conduit Locknut Features: Trade Size: 1/2″ Material: Steel Application: Indoors or Outdoors. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure Carton Type: Bag |
|
|
Halex 26192 Conduit Locknut $5.64 Halex 26192 Conduit Locknut Halex 26192 Conduit Locknut Features: Trade Size: 3/4″ Material: Steel Application: Indoors or Outdoors. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure Carton Type: Bag |
|
|
Halex 26194 Conduit Locknut $5.85 Halex 26194 Conduit Locknut Halex 26194 Conduit Locknut Features: Trade Size: 1 1/4″ Material: Steel Application: Indoors or Outdoors. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure Carton Type: Bag |
|
|
Halex 26195 Conduit Locknut $6.45 Halex 26195 Conduit Locknut Halex 26195 Conduit Locknut Features: Trade Size: 1 1/2″ Material: Steel Application: Indoors or Outdoors. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure Carton Type: Bag |
|
|
Halex 96191 Conduit Locknut $3.71 Halex 96191 Conduit Locknut Halex 96191 Conduit Locknut Features: Trade Size: 1/2″ Material: Steel Application: Indoors or Outdoors. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure Carton Type: Bag |
|
|
Halex 96192 Conduit Locknut $3.78 Halex 96192 Conduit Locknut Halex 96192 Conduit Locknut Features: Trade Size: 3/4″ Material: Steel Application: Indoors or Outdoors. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure Carton Type: Bag |
|
|
Anchor 44n-116-15 Conduit. Each $16.57 Manufacturer: Anchor Brand. Each. Style = Bernard Nozzle Bore Size = 9/16 in Inside Material = Brass Customers also search for: Discount Anchor 44n-116-15 Conduit, Buy Anchor 44n-116-15 Conduit, Wholesale Anchor 44n-116-15 Conduit, 604669192764, 44N-116- |
|
|
ITC Conduit Hellenic Bold $35 Download the ITC Conduit Hellenic Bold font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit Hellenic Medium $35 Download the ITC Conduit Hellenic Medium font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit Hellenic Light $35 Download the ITC Conduit Hellenic Light font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Extra Light $54 Download the ITC Conduit® Extra Light font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Regular SC $54 Download the ITC Conduit® Regular SC font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Extra Bold $54 Download the ITC Conduit® Extra Bold font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Medium $54 Download the ITC Conduit® Medium font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Black Italic $54 Download the ITC Conduit® Black Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Light $54 Download the ITC Conduit® Light font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Black OsF $54 Download the ITC Conduit® Black OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Light OsF $54 Download the ITC Conduit® Light OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Bold Italic $54 Download the ITC Conduit® Bold Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® CE Light $54 Download the ITC Conduit® CE Light font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Medium SC $54 Download the ITC Conduit® Medium SC font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Light Italic $54 Download the ITC Conduit® Light Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Medium OsF $54 Download the ITC Conduit® Medium OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Black SC $54 Download the ITC Conduit® Black SC font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Bold OsF $54 Download the ITC Conduit® Bold OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Italic $54 Download the ITC Conduit® Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Regular OsF $54 Download the ITC Conduit® Regular OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Bold SC $54 Download the ITC Conduit® Bold SC font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Light SC $54 Download the ITC Conduit® Light SC font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Italic OsF $54 Download the ITC Conduit® Italic OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Black $54 Download the ITC Conduit® Black font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® CE Bold $54 Download the ITC Conduit® CE Bold font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Bold $54 Download the ITC Conduit® Bold font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Regular $54 Download the ITC Conduit® Regular font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Medium Italic $54 Download the ITC Conduit® Medium Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® CE Medium $54 Download the ITC Conduit® CE Medium font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
Anchor 42-3035-25 Conduit. Each $8.32 Manufacturer: Anchor Brand. Each. Style = Tweco Length = 15 ft Wire Size = 0.0300 in [Min], 0.0350 in [Max] Used With = Anchor Brand 250, Tweco No. 1 2 Mig Guns Customers also search for: Discount Anchor 42-3035-25 Conduit, Buy Anchor 42-3035-25 Conduit |
|
|
Anchor 44-564-15 Conduit. Each $8.26 Manufacturer: Anchor Brand. Each. Style = Tweco Length = 25 ft Wire Size = 0.0350 in [Min], 0.0450 in [Max] Used With = Anchor Brand 400, Tweco No. 3 4 Mig Guns Customers also search for: Discount Anchor 44-564-15 Conduit, Buy Anchor 44-564-15 Conduit, |
|
|
Anchor 44-116-15 Conduit. Each $8.26 Manufacturer: Anchor Brand. Each. For Use With No. 3, No. 4, and No. 5X Guns Style = Bernard Nozzle Bore Size = 1/2 in Inside Material = Copper Customers also search for: Discount Anchor 44-116-15 Conduit, Buy Anchor 44-116-15 Conduit, Wholesale Anchor 4 |
|
|
48-00-5188 – 5 Piece, 9 inch Long, 18 Teeth Per Inch, Super Sawzall Blade Pack, Metal Cutting Blade For Materials 1/8 inch -3/16 inch , Conduit, Tubing, Channe $12.87 [400861] UPC: 45242082896 10.5L x 1.88W x 0.24H 0.32 LB |
|
|
Halex 64325 Conduit Nipple $4.4 Halex 64325 Conduit Nipple Halex 64325 Conduit Nipple Features: Trade Size: 1/2″ x 2″ Material: Steel Application: Indoors or Outdoors. Use to connect two steel outlet boxes or other metal enclosures; use to extend a length of threaded Rigid or IMC conduit. Miscellaneous: Consult factory for availability of other sizes Carton Type: Tray Box |
|
|
Halex 64327 Conduit Nipple $4.49 Halex 64327 Conduit Nipple Halex 64327 Conduit Nipple Features: Trade Size: 3/4″ x 2″ Material: Steel Application: Indoors or Outdoors. Use to connect two steel outlet boxes or other metal enclosures; use to extend a length of threaded Rigid or IMC conduit. Miscellaneous: Consult factory for availability of other sizes Carton Type: Tray Box |
|
|
Cyberdata / CONDUIT SPEAKER MOUNT RAL 9002 / 011039 $73.16 Cyberdata – CONDUIT SPEAKER MOUNT RAL 9002 – 011039 |
|
|
Halex 67840 4 Conduit Hanger With Nut and Bolt $4.67 Halex 67840 4″ Conduit Hanger With Nut and Bolt Halex 67840 4″ Conduit Hanger With Nut and Bolt Features: Conduit hanger Includes nut and bolt Secures and suspends conduit from overhead supports Steel 4″ |
|
|
Nylon Tubing Fittings Splice Kit For Control Tubing $27.94 Nylon Tubing Fittings Splice Kit For Control Tubing Hynautic Nylon Tubing Fittings – SPLICE KIT FOR CONTROL TUBING |
|
|
Nylon Tubing Fittings Tube Nut For Control Tubing $6.12 Nylon Tubing Fittings Tube Nut For Control Tubing Hynautic Nylon Tubing Fittings – TUBE NUT FOR CONTROL TUBING |
|
|
Nylon Tubing Fittings Lock Ring For Control Tubing $7.37 Nylon Tubing Fittings Lock Ring For Control Tubing Hynautic Nylon Tubing Fittings – LOCK RING FOR CONTROL TUBING |
|
|
Nylon Tubing Fittings Insert For Control Tubing $6.65 Nylon Tubing Fittings Insert For Control Tubing Hynautic Nylon Tubing Fittings – INSERT FOR CONTROL TUBING |
|
|
Nylon Tubing Fittings Coupling For Control Tubing $7.37 Nylon Tubing Fittings Coupling For Control Tubing Hynautic Nylon Tubing Fittings – COUPLING FOR CONTROL TUBING |
|
|
Nylon Tubing Fittings Adapter For Control Tubing $7.89 Nylon Tubing Fittings Adapter For Control Tubing Hynautic Nylon Tubing Fittings – ADAPTER FOR CONTROL TUBING |
|
|
Hydraulic Tubing Hydraulic Tubing *Per Foot* $2.11 Hydraulic Tubing Hydraulic Tubing *Per Foot* Bennett Hydraulic Tubing – HYDRAULIC TUBING *PER FOOT* |
|
|
Dorman – Conduct-Tite 3/8 In. x 10 Ft. Black Wire Spiral Tubing – 86135 $2.99 Dorman offers a comprehensive line of Wire Conduit for almost any automotive electrical repair. All our Wire Conduit is constructed of high-quality materials for long-lasting durability.Product Features:Conveniently packaged in a bag or reusable box or canister to assist with both small and large projects Many different lengths and diameters availableAvailable in a selection of colors including black, blue, and redAlso suitable for a broad variety of household, industrial and commercial uses. Most Electrical and Wiring products are available for in-store pickup from Advance Auto Parts. |
|
|
Dorman – Conduct-Tite 1/4 In. x 3/8 In. Clear Wire Spiral Tubing – 86140 $3.99 Dorman offers a comprehensive line of Wire Conduit for almost any automotive electrical repair. All our Wire Conduit is constructed of high-quality materials for long-lasting durability.Product Features:Available in both insulated and uninsulated versionsMany different wire gauges and diameters availableConveniently packaged in a variety of piece counts to assist with both small and large projectsAlso suitable for a broad variety of household, industrial and commercial uses. Most Electrical and Wiring products are available for in-store pickup from Advance Auto Parts. |
|
|
Siemens ECHR125 1-1/4 Conduit Hub $10.8 Siemens ECHR125 1-1/4″ Conduit Hub Siemens ECHR125 1-1/4″ Conduit Hub Features: Accessory for all load centers 10 circuits or less and outdoor enclosed switches accept EHR series hubs 1-1/4″ |
|
|
Conduit Podium $526 Iron Chinchilla combines the talents of Patrick Neuwirth and Michael Holloway. Their original artwork stirs the imagination and the soul with fluidity of motion, vibrant color, texture and form. Each piece is handmade and all the metal is bent cold by hand using only a vise and arm strength. The dimensions and bends of each piece will vary as the artist responds to nature of the iron. Great prides is taken in the look and strength of each piece. During the finishing process each piece of steel develops its own unique pattern of light and dark tones and no two pieces are the same. The piece is finished with a clear epoxy enamel, applied in several coats to preserve the iron and prevent rust. It is then signed, dated and titled. -Mild Steel with Copper Finish -Hand Made in USA -Cleaning with soft cloth and water is suggested as chemical cleaners may remove protective enamel coating and effect the color and patina of the metals. |
|
|
Conduit For Sale! $4.99 We believe it is important to preserve what makes music special, and make it easy to craft listening experiences. At MOG, browse millions songs and play them instantly. Or just turn on radio where you can stop and replay songs. You can also create playlists for any occasion, and even download songs to your mobile. We are dedicated to employing the cleanest but most powerful technology so you can enjoy music as much as ever. |
|
|
Conduit (Live) $4.99 We believe it is important to preserve what makes music special, and make it easy to craft listening experiences. At MOG, browse millions songs and play them instantly. Or just turn on radio where you can stop and replay songs. You can also create playlists for any occasion, and even download songs to your mobile. We are dedicated to employing the cleanest but most powerful technology so you can enjoy music as much as ever. |
|
|
A Conduit To Heaven $4.99 We believe it is important to preserve what makes music special, and make it easy to craft listening experiences. At MOG, browse millions songs and play them instantly. Or just turn on radio where you can stop and replay songs. You can also create playlists for any occasion, and even download songs to your mobile. We are dedicated to employing the cleanest but most powerful technology so you can enjoy music as much as ever. |
|
|
Conduit 24 $4.99 We believe it is important to preserve what makes music special, and make it easy to craft listening experiences. At MOG, browse millions songs and play them instantly. Or just turn on radio where you can stop and replay songs. You can also create playlists for any occasion, and even download songs to your mobile. We are dedicated to employing the cleanest but most powerful technology so you can enjoy music as much as ever. |
|
|
Conduit 23 $4.99 We believe it is important to preserve what makes music special, and make it easy to craft listening experiences. At MOG, browse millions songs and play them instantly. Or just turn on radio where you can stop and replay songs. You can also create playlists for any occasion, and even download songs to your mobile. We are dedicated to employing the cleanest but most powerful technology so you can enjoy music as much as ever. |
|
|
Omron 9965 Nebulizer Tubing $7.99 Omron 9965 Nebulizer Tubing |
|
|
Redcat Racing Fuel Tubing $3.95 Redcat Racing Fuel Tubing |
|
|
Db Silicone Air Tubing $44.99 Silicone Air Tubing |
|
|
Diffuser for 400494 or 1/2 in. Tubing $11.99 Diffuser for Eheim 400494 tubing. |
|
|
Eheim tubing 394 10ft $9.07 Eheim tubing 394 10ft |
|
|
Eheim tubing 494 10ft $11.88 Eheim tubing 494 10ft |
|
|
Eheim tubing 594 10ft $19.6 Eheim tubing 594 10ft |
|
|
Hagen tubing 103/203/303 39 in $5.16 Hagen tubing 103/203/303 39 in |
|
|
Hagen tubing 39in 303/403 $9.61 Hagen tubing 39in 303/403 |
|
|
Lees tubing 3/8 in $22.38 Lees tubing 3/8 in |
|
|
Lees tubing 1/2 in $29.69 Lees tubing 1/2 in |
|
|
Lees tubing 1/2inx100i.d. $59.07 Lees tubing 1/2inx100i.d. |
|
|
Lees tubing 5/8 in $39.1 Lees tubing 5/8 in |
|
|
Lees tubing 5/8inx100i.d. $76.64 Lees tubing 5/8inx100i.d. |
|
|
Hagen silicone tubing 10ft $2 Hagen silicone tubing 10ft |
|
|
Hagen silicone tubing 20ft $3.69 Hagen silicone tubing 20ft |
|
|
PLANT-AIR TUBING $3.33 PLANT-AIR TUBING |
|
|
.Eheim elbow 494 tubing $3.58 .Eheim elbow 494 tubing |
|
|
Eheim elbow 594 tubing $3.85 Eheim elbow 594 tubing |
|
|
Eheim elbow 794 tubing $6.48 Eheim elbow 794 tubing |
|
|
Ribbed FLEXIBLE TUBING FX5 $19.21 Ribbed FLEXIBLE TUBING FX5 |
|
|
Hudson Flex Bore Tubing $69.9 Hudson Flex Bore Tubing |
|
|
Betty Boop Tubing $6 Betty Boop Tubing |
|
|
Humidifier Connector W/ Tubing $12.04 CONNECTOR,HUMIDIFER, W/TUBING |
|
|
ITC Conduit Hellenic Medium Italic $35 Download the ITC Conduit Hellenic Medium Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit Hellenic Family Pack $145 Download the ITC Conduit Hellenic Family Pack font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit Hellenic Light Italic $35 Download the ITC Conduit Hellenic Light Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit Hellenic Bold Italic $35 Download the ITC Conduit Hellenic Bold Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Black Italic OsF $54 Download the ITC Conduit® Black Italic OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Medium Italic OsF $54 Download the ITC Conduit® Medium Italic OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Extra Bold OsF $54 Download the ITC Conduit® Extra Bold OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit Family Package 2 $389 Download the ITC Conduit Family Package 2 font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® CE Bold Italic $54 Download the ITC Conduit® CE Bold Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Extra Light OsF $54 Download the ITC Conduit® Extra Light OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® CE Medium Italic $54 Download the ITC Conduit® CE Medium Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Extra Light Italic $54 Download the ITC Conduit® Extra Light Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Extra Bold SC $54 Download the ITC Conduit® Extra Bold SC font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit Family Package 1 $292 Download the ITC Conduit Family Package 1 font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Extra Bold Italic $54 Download the ITC Conduit® Extra Bold Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Light Italic OsF $54 Download the ITC Conduit® Light Italic OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® Bold Italic OsF $54 Download the ITC Conduit® Bold Italic OsF font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit® CE Light Italic $54 Download the ITC Conduit® CE Light Italic font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
ITC Conduit Complete Family Pack $670 Download the ITC Conduit Complete Family Pack font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
0.75 Universal Strut Clamp $0.99 MPQ1777: Features: -Universal strut clamp. -Highly versatile universal strut clamp. -Universal strut clamps are designed to fit both pipe (rigid conduit) and thin walled tubing (emt) in the corresponding sizes. -Strut clamp has zinc electroplate finish. -1 Year warranty. Specifications: -Design load: 600 lbs. -Pipe size: 0.75 . -O.D: 0.99 . -Box quantity: 100. |
|
|
1/8 To 1-1/8 Tubing Cutter $18.43 Capacity 1/8 to 1-1/8 . Cuts tubing of hard or soft aluminum, brass, copper and thin wall conduit. Enclosed feed mechanism to protect threads against dirt and damage. Tubing rides freely on hardened rollers. Cuts cleanly without burrs or tubing distortion. Special Superior long-life alloy cutter wheels. Retractable, hardened reamer blade built in, locks open or closed. PROFESSIONAL QUALITY |
|
|
18V LXT Cordless Metal Cutting Saws – 18v lxt lith crdlss 5-3/8 metal cutting saw kit $389 MAK2743: This item features: -LXT Lithium-Ion battery and optimum charging system produces 280% total lifetime work with 2x more cycles. -Cuts Unistrut all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. -Ergonomic shape fits like a glove with even pressure and easy control. -Voltage: 18.00 V. -Batt. Cap.: 3.000 A-h. -Batt. Type: Lithium-Ion. -Blade Diam: 5 3/8 in. -Speed: 3400 rpm [Max]. -Arbor Diam: 5/8 in. -Cutting Depth: 2 in [Max]. -Length: 12 in. -Includes: (2) Batteries, 30-Minute Rapid Optimum Charger, 30T Carbide-Tipped Blade, Case. -Wt.: 6.40 lb. -Price is for 1 Each. |
|
|
4 Metal Reciprocating Blade 20554-424R $11.99 OJD1086: Features: -For metals less than 1/8” thick, tubing, conduit, and trim.-24 tpi.-.035” thick.-5 per card. Dimensions: -3/4” width.-4” length. |
|
|
ACDelco 14 Cut Off Saw $189.95 ACDelco 14″ Cut Off Saw is perfect for home improvement and DIY projects. Great for cutting angle iron steel & PVC pipe tubing and conduit. Features 3800 RPM no load 1″ arbor max cutting depth 41/4″. Quick lock vice pivoting fence steel base with rubber feet overload protection 14″ grinding blade included. 120V 60HZ 1800W 15AMP. Limited warranty. |
|
|
ACDelco 14 Cut Off Saw $169.95 ACDelco 14″ Cut Off Saw is perfect for home improvement and DIY projects. Great for cutting angle iron steel & PVC pipe tubing and conduit. Features 3800 RPM no load 1″ arbor max cutting depth 41/4″. Quick lock vice pivoting fence steel base with rubber feet overload protection 14″ grinding blade included. 120V 60HZ 1800W 15AMP. Limited warranty. |
|
|
American Saw #624R 5PK 6 24T Recip Blade $12.59 For all metals less than 1/8 thick, tubing, conduit, and trim 24 tpi 3/4 width .035 thick 6 length 5 per card |
|
|
Bi-Metal Reciprocating Blade $9.62 4 , 24TPI, for cutting metal trim, conduit, or tubing – 4 24T RECIP BLADE: Tough, flexible steel back and Matrix II steel with 8% cobalt cutting edge give maximum durability. Angled shank for faster cutting. 1/2 universal shank. Packaged 5 blades in reusable, sliding plastic case. |
|
|
Bi-Metal Reciprocating Blade $12.27 6 , 24TPI, for cutting metal trim, conduit, and tubing – 6 24T RECIP BLADE: Tough, flexible steel back and Matrix II steel with 8% cobalt cutting edge give maximum durability. Angled shank for faster cutting. 1/2 universal shank. Packaged 5 blades in reusable, sliding plastic case. |
|
|
Bi-Metal Super Sawzall Blade $8.23 Milwaukee 48-00-5181 Specifications: Length: 4 Teeth Per Inch: 14 Material: Bi-Metal Applications: Metal 3/16 – 1/4 , conduit, tubing, channels, pipe, rubber, and fiber Quantity: 5 per pack Milwaukee 48-00-5181 Features: Made with Matrix II high speed steel teeth containing 8% Cobalt to keep a sharper tooth edge longer Bi-Metal design allows faster cutting, longer life blades that can bend without shattering Manufactures Sawzall blades for the toughest professional applications Heat treated to maximize performance in specific cutting applications 1/2 Universal tang that fits all Sawzalls and standard competitive saws |
|
|
Bimetal Reciprocating Blade $5.86 6 , 24TPI, for cutting metal trim, conduit and tubing – 2PK 6 24T RECIP BLADE: Tough, flexible steel back and Matrix II steel with 8% cobalt cutting edge give maximum durability. Angled shank for faster cutting. 1/2 universal shank. 2 blades per card. |
|
|
Checkpoint 610BK Checkpoint Torpedo Level U6 V-Groove with Conduit Magnets – Black $47.45 Features There is NO level like the U6 V-Groove! Its patented design incorporates more degree readings than any level in its class to meet any contractor’s needs with readings at 0, 22.5, 30, 45, 60 and 90 degrees. And with our 45 min./arc reading bubble vial, you get precise and accurate readings every time. Super-deep V-Groove System that’s designed to fit radius pipes and conduits to give clear, easy-to-see readings every time. It also has 16 rare-earth neodymium magnets for incredible holding strength on any steel pipe, conduit or tubing where precision bends are required. CNC-machined from solid 6061-T6 aluminum billet, the U6 V-Groove is buff-polished and ‘rospace-anodized in Black. Finished with laser-etched graphics, the U6 V-Groove measures in at a super-compact 2.5 x 2 and is sure to be the professional tradesman’s go-to tool at the job site. A convenient protective belt case is included free with every U6 V-Groove, to ensure it’s as safe on the job as you are. The U6 V-Groove is another CHECKPOINT No Compromise product that’s built to stand and deliver for the hard-working professional! |
|
|
Compression Fitting $44.4 Used – High Quality Content by WIKIPEDIA articles! Compression fittings are used in plumbing and electrical conduit systems to join two tubes or thin- walled pipes together. In instances where two pipes made of dissimilar materials are to be joined (most commonly PVC and copper), the fittings will also be made of one or more compatible materials appropriate for the connection. Compression fittings for attaching tubing (piping) commonly have ferrules (also known as olives) in them. |
|
|
Cordless Metal Cutting Saw $169 LXT Lithium-Ion battery and Optimum Charging System produces 280% more lifetime work with 2x more cycles. Includes tool only. Makita-built motor delivers 3,600 RPM for faster cutting in a wide range of metals including Unistrut all thread, channel, conduit, pipe, sheet metal, square tubing, steel and more. Compact, ergonomic design at 13-3/4-in long and weighs only 5.7 lbs. for reduced operator fatigue. Built-in L.E.D. light illuminates the work area. Ergonomic shape fits like a glove with even pressure and easy control. Soft grip handle provides increased comfort on the job. 3-year warranty on tool. Includes: 18V Cordless LXT Lithium-Ion 5-3/8-in Metal Cutting Saw (Tool Only) – BCS550Z, 30T Carbide Tipped Blade – A-94518, Tool Only – Battery and Charger Sold Separately, Operating Manual. |
|
|
E-Z Ratchet Tubing Cutter 133 $19.57 OGH1181: Features: -Ratcheting action rotates the cutter around the tube allowing a standard size cutter to be used in close quarter applications .-Longer handle requires less effort to rotate cutter reducing hand fatigue .-Wide hardened flared clearance grooved rollers allow true cuts close to flared end tubing to avoid tube replacement in existing installations .-Cuts copper, brass, aluminum tubing, and thin wall conduit .-Spare cutting wheel supplied in handle .-Replaceable tool steel cutting wheels RW121/2, RW122, and RW122P .-1/8 to 1-1/8 capacity .-Carded . |
|
|
Enclosed Feed Cutters – 205 tubing cutter $84.63 ONQ1669: Ratcheting Encl. Feed Cutter Heavy-Duty Wheels This item features: -Features an enclosed feed screw to eliminate clogging and jamming, grooved rolls for close-to-flare cuts. -Fold-away reamer. -Made from high strength zinc alloy with a spare cutter wheel in the handle. -Cuts copper, brass, and aluminum tubing, and thin-wall conduit. -Model 205 has a quick-acting mechanism. -Tube O.D.: 1/4 in [Min], 2 3/8 in [Max]. -Cutting Direction: Straight. -Cut Type: Wheel Cut. -No. of Wheels: 1. -Handle Type: Screw Knob. -Mechanism: Adjustable Screw. -Applicable Materials: Aluminum, Copper, Brass. -Applications: Tube. -Includes: Spare Wheel Stored in Knob. -Type: Tube Cutter. -Price is for 1 Each. |
|
|
Gardner Bender 10 Count 1in. Two Hole Plastic Straps GCC-310 $9.97 Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing, etc Resists deterioration from UV rays and breakage from extreme cold Heavy duty polyethylene 1 10 per bag |
|
|
Gardner Bender GCC-120 20 Count 1/2-in Two Hole Plastic Straps $10.57 Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing, etc Resists deterioration from UV rays and breakage from extreme cold Heavy duty polyethylene 1/2 20 per bag |
|
|
Gardner Bender GCC-610 10 Count 2-in Two-Hole Plastic Straps $11.83 Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing, etc Resists deterioration from UV rays and breakage from extreme cold Heavy duty polyethylene 2 10 per bag |
|
|
High Performance Bi-Metal Sawzall Blades – 3-5/8 10tpi super sawzall blade $11.44 MWK2818: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
High Performance Bi-Metal Sawzall Blades – 4 10tpi super sawzall b $10.06 MWK2813: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
High Performance Bi-Metal Sawzall Blades – 4 14tpi supersawzall bl $20.68 MWK2821: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
High Performance Bi-Metal Sawzall Blades – 4 24t super sawzall bla $8.23 MWK2825: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
High Performance Bi-Metal Sawzall Blades – 6 18tpi super sawzall s $11.43 MWK2833: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
High Performance Bi-Metal Sawzall Blades – 6 24tpi supersawzall bl $11.43 MWK2834: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
High Performance Bi-Metal Sawzall Blades – 9 14tpi super sawzall b $100.88 MWK2859: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code #160; #160;Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Material |
|
|
High Performance Bi-Metal Sawzall Blades – 9 18tpi super sawzall b $109.02 MWK2860: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code #160; #160;Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Material |
|
|
High Performance Bi-Metal Sawzall Blades – super sawz 6t 9l 50 pk $123.65 MWK2849: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code #160; #160;Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Material |
|
|
High Performance Bi-Metal Sawzall Blades – super sawz 8/12t12l 50pk $145.2 MWK2855: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
High Performance Bi-Metal Sawzall Blades – super sawzall bl 18t 12lg $21.48 MWK2841: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
High Performance Bi-Metal Sawzall Blades – super sawzall bl 18t 6lgtorch $59.85 MWK2844: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
Hitachi CC14SFS 15.0 Amp 14-in Cut-Off Saw $167.98 Thecc14SFS 14-in portable cut-off saw is powered by a 2,000 Watt, 15 Amp, Hitachi motor, which delivers 3,800 RPM. Increased comfort is provided with the soft grip rubber handle, and the quick locking vise improves speed and control. The arbor is 1-in standard, and the cut capacities are as follows: Bar 2-9/16-in, Pipe 5-in, Steel 5-1/8-in. The max opening of the vise is 9-29/64-in. This tool comes complete with a 14-in cut-off wheel. Hefty 15 Amp (2000W) motor produces a no-load speed of 3,800 RPM for greater cutting efficiency. Portable, rugged and lightweight at 37 lbs. to withstand daily transport between trucks and jobsites. Adjustable fence is easy to use and miters 45 degrees to the right or left for versatility. The chute off the back of the saw diverts sparks and can be angled to suit the workspace. A conveniently located trigger switch with lock-off button operates the saw and prevents accidental starts. Elastomer coated D-handle absorbs vibration, adds comfort and prevents slippage when making cuts. Quick-lock/release vise provides fast feeding and changing of materials of different sizes. Spindle lock provides easy mounting/removal of cutting wheel. Versatile ability to cut various steel materials like pipes, shaped steel, round bars, angle iron and other materials like conduit pipe, channels, tubing and drywall track. Includes: 15.0 Amp 14-in Cut-Off Saw – CC14SFS, 14-in Cut-Off Wheel – 727685B10, 8mm Hex Bar Wrench – 955857. |
|
|
Lint Alert Dryer Vent Alarm $69.99 The LintAlert dryer safety alarm provides a simple solution to monitoring your dryer’s safe operation and energy efficiency. It can help prevent dryer fires and save energy by letting you know when your dryer is not operating at maximum efficiency. The LintAlert measures the back pressure in your dryer vent that can be caused by normal lint accumulation in the dryer duct, a kinked or crushed exhaust hose or a blockage in the termination hood.Installation is simple and requires no special tools but does require your current exhaust conduit be cleaned to like-new condition. Your LintAlert includes everything needed for a do-it-yourself installation: The LintAlert detection module, smart tap device which installs into the dryer duct and 6 feet of tubing to connect the detection module to the smart tap.The LintAlert is backed by a one year parts and labor warranty and unsurpassed customer service. Get a LintAlert today and provide your loved ones peace of mind and increase your home energy efficiency from one innovative package! Helps Prevent Dryer Fires Easy No-Tools-Needed Installation Alerts You to Blockage in Your Dryer Vent Maintain Your Dryers Maximum Energy Efficiency Tap Fitting and Six Feet of Tubing Included |
|
|
Milwaukee 14 Teeth per Inch Super Sawzall Blade – 9 – Durable – Steel – 5 / Pouch $13.86 Super Sawzall blades are made with Matrix II high speed steel teeth containing 8% Cobalt to keep a sharper tooth edge longer. The tough Bi-Metal design allows faster cutting, longer life blades that can bend without shattering. Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. This blade has a 1/2 universal tang that fits all Sawzalls and standard competitive saws. For cutting metal 3/16 through 1/4 , conduit, tubing, channels, pipe, rubber, and fiber. |
|
|
Milwaukee 6 18 TPI Bi-Metal Super Sawzall Blade Bulk Pack 48-01-6184 $81.48 Milwaukee 48-01-6184 Specifications: Length: 6 Teeth Per Inch: 18 Material: Bi-Metal Applications: Metal 1/8 – 3/16 , conduit, tubing, channels, and pipe Quantity: 50 per pack Milwaukee 48-01-6184 Features: Super Sawzall blades are made with Matrix II high speed steel teeth containing 8% Cobalt to keep a sharper tooth edge longer Tough Bi-Metal design allows faster cutting, longer life blades that can bend without shattering Manufactures Sawzall blades for the toughest professional applications Heat treating designed to maximize performance in specific cutting applications Blade has a 1/2 universal tang that fits all Sawzalls and standard competitive saws |
|
|
Milwaukee Elec Toold #48-00-5183 5PK 4 18TPI Sawza Blade $8.23 MWK2823: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
Milwaukee Elec Toold #48-00-5189 5PC 12 18T Cutt Blade $17.23 MWK2829: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
Milwaukee Elec Toold #48-00-5282 5PK 6 14TPI Sawza Blade $10.21 MWK2832: This item features: -1/2 universal blade tang fits in all Sawzalls. -Bi-Metal construction increases blade life, blades do not shatter. -Matrix II teeth with 8% cobalt. -Uniform gullet depth. -Blade reversible in clamp. -For fast cutting, all woods, nail embedded, and composition materials. -Fleam-filed teeth for extremely sharp, fast cutting with a smooth edge in nail-free wood and plastics. -Sloped shape ideal for plunge cutting. -Strengthened tooth tip. -Wide gullet shape allows chips to clear the cut. -Excellent for plunge cutting into wood and nail embedded wood without bending blades. -Cuts into walls that contain wood, nails, plaster, and aluminum: great for demolition work. -Extra long demolition blade. -For very fast cutting, nail embedded wood, and general roughing-in. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals. -All woods, nail embedded, composition material, plastic, ferrous and non-ferrous metals, cast iron. -For scroll cutting wood, contours, nail-embedded wood, and plastics. -For scroll cutting metal 1/8 through 3/16 . -For scroll cutting metal under 1/8 . -Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber. -Metal 1/8 thru 3/16 , conduit, tubing, channels, pipe. -Metal thinner than 1/8 , tubing, pipe, trim. -All woods, nail embedded, composition material, plastic, light gauge non-ferrous metals and aluminum: has 5/8 width for higher flexibility. -Metal pipe, channels, tubing, angle iron up to 4 , steel, and nail-embedded wood. -Cutting Edge Material: HSS-E (Co-M42). -Material: Bi-Metal. -Shank Type: 1/2 in. Universal. -Type: Reciprocating Saw. Model Code Model Description AAApplicable Materials:Most Metals, Plastic, Length:4 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ABApplicable Materials:Most Metals, Plastic, Length:6 in, Teeth Per Inch:14, Thickness:0.0350 in, Width:3/4 in, Quantity:5 per pouch ACApplicable Materials:Most M |
|
|
Milwaukee Elec Toold #6176-20 14 Cut Off Machine $182.16 MWK2673: Features: -Powerful 15 amp motor is designed for maximum cutting efficiency, performance and durability allowing for fast cutting of drywall track in bundles, angle iron, conduit, pipe, channels, tubing, and rebar up to a 5 maximum capacity .-A quick set up, quick release locking device holds material being cut securely during the cutting process .-Material can be angle cut up to 45 .-Arm locks down for easy portability when moving this tool to the job site .-Heavy duty cast iron base .-Spindle lock for convenient changing of abrasive wheels .-3900 RPM, 5 pipe cutting capacity .-3.2 HP maximum output .-2400 watts .-15 amp . |
|
|
Milwaukee Electric Tools – Ice Hardened Sawzall Blades 9 Ice Edge Sawzall Bld18 Tpi: 495-48-01-9188 – 9 ice edge sawzall bld18 tpi $182.5 MWK3735: Features: -Blade reversible in clamp.-Matrix II teeth with 8% cobalt.-Metal 3/16 thru 1/4 , conduit, tubing, channels, pipe, rubber, fiber.-Uniform gullet depth.-Bi-Metal construction with a cryogenic treatment creates ultimate performance. Specifications: -Applicable Materials: Masonry Materials, Most Metals, Non-Ferrous Soft Metal, Wood.-Applications: Demolition, Remodeling, Rescue.-Cutting Edge Material: HSS-E (Co-M42).-Material: Bi-Metal.-Shank Type: 1/2 in. Universal.-Teeth Per Inch: 18.-Thickness: 0.0350 in.-Quantity: 50 per box. Additional Info: 9 ICE EDGE SAWZALL BLD18 TPI Cost is for a min. order of 1/PKG UNSPSC: Testing Approvals: |
|
|
Paladin Tools Variable Temperature Heat Gun $59.99 Variable temperature heat gun kit for 250 to 1100 degree F applications. Perfectly suited for heat-shrink tubing, flex conduit heat-shrink solder tube applications. |
|
|
Sawzall Bi-Metal Blades 6" x 18T – 50 Pack – 48-01-6184, by Milwaukee Electric Tool $107.7 Super Sawzall blades are made with Matrix II high speed steel teeth containing 8 percent Cobalt to keep a sharper tooth edge longer. The tough Bi-Metal design allows faster cutting, longer life blades that can bend without shattering. Milwaukee designs and manufactures Sawzall blades for the toughest professional applications. Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. Durable, long life blades are the goal of every blade we make. This blade has a 1/2 inch universal tang that fits all Sawzalls and standard competitive saws.: 18 TPI, 6 in. Length, Bi-Metal Construction : 1/2 in. Universal Tang fits all Sawzalls : 50 blades per box : For cutting metal 1/8 in. thru 3/16 in., conduit, tubing, channels, and pipe. |
|
|
Sawzall Blade 12", 18 Teeth per Inch – 5 Pack – 48-00-5189, by Milwaukee Electric Tool $30.9 : 18 TPI, 12 in. Length, Bi-Metal Construction.: 1/2 in. Universal Tang fits all Sawzalls. : 5 blades per pouch. : For cutting metal 1/8 in. thru 3/16 in., conduit, tubing, channels, and pipe. |
|
|
Sawzall Blade 6", 14 Teeth per Inch – 5 Pack – 48-00-5182, by Milwaukee Electric Tool $22.89 : 14 TPI, 6 in. Length, Bi-Metal Construction. : 1/2 in. Universal Tang fits all Sawzalls. : 5 blades per pouch. : For cutting metal 3/16 in. thru 1/4 in., conduit, tubing, channels, pipe, rubber, and fiber. |
|
|
Sawzall Blade 6", 18 Teeth per Inch – 5 Pack – 48-00-5184, by Milwaukee Electric Tool $22.89 : 18 TPI, 6 in. Length, Bi-Metal Construction. : 1/2 in. Universal Tang fits all Sawzalls. : 5 blades per pouch. : For cutting metal 1/8 in. thru 3/16 in., conduit, tubing, channels, and pipe. |
|
|
Sawzall Blade 9", 18 Teeth per Inch – 5 Pack – 48-00-5188, by Milwaukee Electric Tool $26.37 : 18 TPI, 9 in. Length, Bi-Metal Construction. : 1/2 in. Universal Tang fits all Sawzalls. : 5 blades per pouch. : For cutting metal 1/8 in. thru 3/16 in., conduit, tubing, channels, and pipe. |
|
|
Screw Feed Cutters – 10 tube cutter w/hd whl $36.32 ONQ1692: This item features: -Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit. -Nos. 10, 15, 20 feature a convenient fold-away reamer. -No. 30 is rated for larger diameter steel and stainless steel tubing. -No. 15-SI is especially designed for stainless steel tubing. -Heavy-Duty Wheel. -Type: Tube Cutter. -Price is for 1 Each. Model Code Model Description AAStd. Wheel:E-1240, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb ABStd. Wheel:E-1240, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb ACStd. Wheel:E-1240, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb ADStd. Wheel:E-1525, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Stainless Steel Tubing AEStd. Wheel:E-2191, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AFStd. Wheel:E-2558, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AGStd. Wheel:F-158, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb AHStd. Wheel:F-158, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb AIStd. Wheel:F-158, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb |
|
|
Screw Feed Cutters – 10 tubing cutter $45.84 ONQ1691: This item features: -Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit. -Nos. 10, 15, 20 feature a convenient fold-away reamer. -No. 30 is rated for larger diameter steel and stainless steel tubing. -No. 15-SI is especially designed for stainless steel tubing. -Heavy-Duty Wheel. -Type: Tube Cutter. -Price is for 1 Each. Model Code Model Description AAStd. Wheel:E-1240, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb ABStd. Wheel:E-1240, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb ACStd. Wheel:E-1240, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb ADStd. Wheel:E-1525, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Stainless Steel Tubing AEStd. Wheel:E-2191, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AFStd. Wheel:E-2558, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AGStd. Wheel:F-158, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb AHStd. Wheel:F-158, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb AIStd. Wheel:F-158, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb |
|
|
Screw Feed Cutters – 15 tube cutter w/hd whl $40.26 ONQ1694: This item features: -Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit. -Nos. 10, 15, 20 feature a convenient fold-away reamer. -No. 30 is rated for larger diameter steel and stainless steel tubing. -No. 15-SI is especially designed for stainless steel tubing. -Heavy-Duty Wheel. -Type: Tube Cutter. -Price is for 1 Each. Model Code Model Description AAStd. Wheel:E-1240, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb ABStd. Wheel:E-1240, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb ACStd. Wheel:E-1240, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb ADStd. Wheel:E-1525, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Stainless Steel Tubing AEStd. Wheel:E-2191, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AFStd. Wheel:E-2558, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AGStd. Wheel:F-158, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb AHStd. Wheel:F-158, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb AIStd. Wheel:F-158, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb |
|
|
Screw Feed Cutters – 15 tubing cutter $53.4 ONQ1693: This item features: -Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit. -Nos. 10, 15, 20 feature a convenient fold-away reamer. -No. 30 is rated for larger diameter steel and stainless steel tubing. -No. 15-SI is especially designed for stainless steel tubing. -Heavy-Duty Wheel. -Type: Tube Cutter. -Price is for 1 Each. Model Code Model Description AAStd. Wheel:E-1240, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb ABStd. Wheel:E-1240, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb ACStd. Wheel:E-1240, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb ADStd. Wheel:E-1525, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Stainless Steel Tubing AEStd. Wheel:E-2191, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AFStd. Wheel:E-2558, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AGStd. Wheel:F-158, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb AHStd. Wheel:F-158, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb AIStd. Wheel:F-158, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb |
|
|
Screw Feed Cutters – 15-si stainless steel tubing cutter $53.03 ONQ1690: This item features: -Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit. -Nos. 10, 15, 20 feature a convenient fold-away reamer. -No. 30 is rated for larger diameter steel and stainless steel tubing. -No. 15-SI is especially designed for stainless steel tubing. -Heavy-Duty Wheel. -Type: Tube Cutter. -Price is for 1 Each. Model Code Model Description AAStd. Wheel:E-1240, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb ABStd. Wheel:E-1240, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb ACStd. Wheel:E-1240, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb ADStd. Wheel:E-1525, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Stainless Steel Tubing AEStd. Wheel:E-2191, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AFStd. Wheel:E-2558, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AGStd. Wheel:F-158, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb AHStd. Wheel:F-158, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb AIStd. Wheel:F-158, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb |
|
|
Screw Feed Cutters – 20 tube cutter w/hd whl $71.18 ONQ1696: This item features: -Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit. -Nos. 10, 15, 20 feature a convenient fold-away reamer. -No. 30 is rated for larger diameter steel and stainless steel tubing. -No. 15-SI is especially designed for stainless steel tubing. -Heavy-Duty Wheel. -Type: Tube Cutter. -Price is for 1 Each. Model Code Model Description AAStd. Wheel:E-1240, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb ABStd. Wheel:E-1240, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb ACStd. Wheel:E-1240, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb ADStd. Wheel:E-1525, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Stainless Steel Tubing AEStd. Wheel:E-2191, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AFStd. Wheel:E-2558, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AGStd. Wheel:F-158, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb AHStd. Wheel:F-158, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb AIStd. Wheel:F-158, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb |
|
|
Screw Feed Cutters – 20 tubing cutter $69.35 ONQ1695: This item features: -Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit. -Nos. 10, 15, 20 feature a convenient fold-away reamer. -No. 30 is rated for larger diameter steel and stainless steel tubing. -No. 15-SI is especially designed for stainless steel tubing. -Heavy-Duty Wheel. -Type: Tube Cutter. -Price is for 1 Each. Model Code Model Description AAStd. Wheel:E-1240, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb ABStd. Wheel:E-1240, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb ACStd. Wheel:E-1240, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb ADStd. Wheel:E-1525, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Stainless Steel Tubing AEStd. Wheel:E-2191, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AFStd. Wheel:E-2558, Cutting Cap.:1 in [Min], 3 1/8 in [Max], Applicable Materials:Steel, Stainless Steel Tubing, Wt.:3 1/2 lb AGStd. Wheel:F-158, Cutting Cap.:1/8 in [Min], 1 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:7/8 lb AHStd. Wheel:F-158, Cutting Cap.:3/16 in [Min], 1 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 1/4 lb AIStd. Wheel:F-158, Cutting Cap.:5/8 in [Min], 2 1/8 in [Max], Applicable Materials:Copper, Brass, Aluminum, Thin-Wall Conduit, Wt.:1 3/4 lb |
|
|
Superior Tool ST-2000 Tubing & Pipe Cutter 36878 $32.96 Tubing and pipe cutter Cuts up to 1 schedule 40 pipe and 2 copper tubing 5/8 to 2-1/8 OD capacity for tubing, conduit and steel fencing 3/8 to 1 OD capacity for steel or iron pipe including galvanized Made of strong lightweight aluminum construction and a comfort non slip polymer grip Durable epoxy powder coated finish for corrosion resistance and durability Heat treated alloy steel cutting wheel A favorite for versatility, this tool ships with the cutter wheel for copper, iron and steel |
|
|
TEKTON Pipe Cutter $13.96 Heavy Duty Malleable Steel Frame, Hardened Alloy Steel Cutting Wheel, Extra Large T-Handle Screw Feed for Precise Adjustment of Cutting Pressure, Parallel Guide Rollers Ensure a Square Cut, Cuts Copper and Thin-Walled Steel Pipe, Metal Conduit, Brass and Aluminum Tubing, Pipe Capacity: 1/2 to 2 O. D. |